Mojave Lever Crew - Roll Call!

[ar15barrels]

MLC field HQ modifications mid point to completion

[ATTACH]1077704[/ATTACH]

Insulating your utility trailer to make it a little warmer at night?

[yzErnie]

I have a 94/22 and a Henry H001. They quality of the Winchester really stands out compared to the Henry.

I'll trade you a Rossi 24" SS 92 for it.
https://www.calguns.net/calgunforum/...2#post26752262

If I didn't already have an 1894cs in .357 I'd have to consider that!!

I have a 9422M that I love. It outshoots my bolt action .22 mags with lighter, faster Winchester Supreme bullets it prefers. Mine has been used so it is not "mint." It also shoots the CCI "Green" ammo quite well. My son has headshot a few jack rabbits with it.

It does shoot well and I am the weak link in its accuracy!!

[200Apples]

I want that .22 Mag lever Winchester. I really do...

*broke*

Insulating your utility trailer to make it a little warmer at night?

I yam! We call these "cargo" trailers. I think of a utility trailer as open trailer for a few bags of mulch and a riding mower...

And for those sub-40* nights and early mornin's I have a Webasto 2000 diesel heater. Clean, dry heat. And too much of it. Might have to rig a blow-off valve. Hahaha...

[bigbossman]

Those guns seem to demand more $ then the LR. That's always suprised me because of ammo availability and price. I think your right on at 16. You can always lower the price.

I bought a plain-jane .22m one a while ago off of GB for $800 delivered, that needed a new butt-stock and required considerable cleaning to make it presentable. Even at that I thought it was a decent deal (although now it is exhibiting extraction problems ). I don't know about $1,600 though...... I've seen a minty XTR version sitting on a dealer's table for the last three gun shows and it hasn't moved yet. I tossed him what I thought was a reasonable offer, but he's holding fast at $1700.

I have a pair of the XTR's in .22, and I wouldn't take less than $900 for either of them.

You don't happen to need a nice hunting rifle in 6.5CM, do you?

[golfish]

I bought a plain-jane .22m one a while ago off of GB for $800 delivered, that needed a new butt-stock and required considerable cleaning to make it presentable.

bossman, didn't you post some info after you bought it then some pictures after you finished it? If I recall it was worth well over $1600.00

[bigbossman]

bossman, didn't you post some info after you bought it then some pictures after you finished it? If I recall it was worth well over $1600.00

Yes, I did post before and after pictures. Special deal, just for you. If you want it you can have it for a friend's and family price of a paltry $1,200.

Seriously though, if someone wanted to pay me $1,600 for it I would sell it in a heartbeat. Got to figure out the pesky extraction issue though. I've been traveling a lot for work and haven't had a chance to look into it in detail.

[golfish]

Yes, I did post before and after pictures. Special deal, just for you. If you want it you can have it for a friend's and family price of a paltry $1,200.

Seriously though, if someone wanted to pay me $1,600 for it I would sell it in a heartbeat. Got to figure out the pesky extraction issue though. I've been traveling a lot for work and haven't had a chance to look into it in detail.

lol, good one. I have a trade if your interested...

You stole that gun..

[bergmen]

Ok experts, need a price check on a 9422M I am going to be selling. It has been very lightly used and in excellent condition. I have the original box and paperwork with it too. Serial #F738XXX, the best info I have found is 1998(?) production.

I have looked on GB and the ones I find in similar condition are going from $1300 on up with some going for over $1600. Are those fair prices in today's market?

ETA: I also looked in the marketplace but the last ones sold were at least a couple years ago.

I suppose this is a pretty dangerous thing to ask but could you post a picture or two?

In lieu of those, straight stock or pistol grip? Checkered?

Dan

[bigbossman]

lol, good one. I have a trade if your interested...

You stole that gun..

Well...... I'm sorta disinclined to trade, but shoot me a PM and let me know what you propose. Like I said, the rifle has extraction issues at present. I haven't pulled it apart so I don't know if it is just a dirty chamber, or something a little more serious.

[bigbossman]

I suppose this is a pretty dangerous thing to ask but could you post a picture or two?

In lieu of those, straight stock or pistol grip? Checkered?

Dan

Yes, the checkered ones with glossy finished stocks are the XTR model, and fetch more than the plain walnut "classic" ones. And of course - since these are desirable and collectable, condition is everything if you want to get close the high range on resale.

[yzErnie]

I suppose this is a pretty dangerous thing to ask but could you post a picture or two?

In lieu of those, straight stock or pistol grip? Checkered?

Dan

I'll snap some pics this morning.

[yzErnie]

I suppose this is a pretty dangerous thing to ask but could you post a picture or two?

In lieu of those, straight stock or pistol grip? Checkered?

Dan

Sent you several pics via PM because I don't want to take up a bunch of room here in this thread.

[bergmen]

Sent you several pics via PM because I don't want to take up a bunch of room here in this thread.

Yes, got them, thank you!

Dan

[pennstater]

MLC field HQ modifications mid point to completion

[ATTACH]1077699[/ATTACH]

[ATTACH]1077704[/ATTACH]

[ATTACH]1077700[/ATTACH]

[ATTACH]1077701[/ATTACH]

Coming right along Chris. Wait a minute; where's the bar gonna be located?

MLC

[yzErnie]

How about a couple teasers??!! lol