Unconfigured Ad Widget

Collapse

"Reloading" 22LR

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #31
    stilly
    I need a LIFE!!
    • Jul 2009
    • 10685

    Oh yes. Let's morph this idea to making Mercury Fulminate. MMM nom nom nom...

    Look at where we are today. If you want match ammo then go make match ammo, else, just look for the best 22lr stuff you can get. Reloading is supposed to be dumbed down enough to make it fun and artful. I realyl find very little science in a lot of what is published since nothing is ever really consistent and there are so many differnet opinions on it all.

    IE: Max load for 44 mag with H-110 is 24.5gr? DO NOT GO OVER? HAH! They did not even show any signs of over pressure, I want to try some 24.6 and 24.7gr now...

    Aint mercury fulminate kinda shock sensitive also? Why not just make some nitrogen tri-iodide? The primer stuff that has been coming out of the 22lr shells that I have taken apart is greenish/yellowish. I thought that mercury fulminate was reddish. It would be nice if there was a way to mix it HMMMMMMMMM. Mix the primer that has come out with some alcohol and repaste it in and let it dry up, then load it back in. But damn that is a lot of work for a 22lr. NOW, if you had a magical 22lr die set and a way of getting/using the 36gr/40gr whatever bullets and a surefire way of making a paste primer to use a needle to drop into the bottom of the shell again and RESHOOT a 22lr, NOW you are talking, but the entire idea starts with that priming paste...

    Until you have the die set and the recipe for priming, this idea is like one that I had come up with. Fun to toy with, but prolly not practical. Thanks a lot guys, now I am off to hunt down 22lr home made primer...

    ALSO, I made a mistake previously. The 22lr dies that I saw were for Bullet Swaging. I can not view the CH4D page, but it is my guess that those are for swaging 22lr into .224 bullet jackets...

    SO, I guess that I have NOT really seen any 22lr reloading dies. After thinking about it some more though, how would you load it? Hold it? It is RIMFIRE, the posibility could be VERY real of one going off as you play around with it because you would be holding onto the rim most likely. I may be new to reloading, but not even the BoLee has a recipe for 22lr...

    I think CSA brought the joke in and Laffy Staffy took the bait hook line and sinker... BAM! HoWzAT for a wizecrack... Now on with the fun ya stick in the muds!


    In case I did not say it like this, I will say it now, Sorry Mr. Danger, you aint gonna be reloading .22lr any time soon unless it is by replacing the lead with clay and whatever powder you want. But good luck getting that to fly straight. Just hunt down your magical unicorn ammo. SOMEONE surely has some...


    :flickcig:
    Last edited by stilly; 07-07-2013, 11:55 PM.
    7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...

    Need GOOD SS pins to clean your brass? Try the new and improved model...



    And remember- 99.9% of the lawyers ruin it for the other .1%...

    Comment

    • #32
      A and O
      Member
      • Apr 2013
      • 158

      TRY MATCHES AS YOUR PRIMER MEDIUM

      Interesting thread. I remember several years back others talking along this same line. The primer compound they used was from wooden match sticks as I recall. I never followed through in trying it, since I found the great value and accuracy in the Wolf 22LR Match ammo. Wolf equals SK here. Made under contract with SK.

      Comment

      • #33
        50BMGBOB
        Senior Member
        • Dec 2005
        • 1738

        Originally posted by BigBronco
        I remember a thread or an article about reloading spent 22 rim. They were doing it in ii think in the Soviet or Middle east part of the world. It can be done only the area of a previous primer strike was the no fire area. Google Fu could be handy here.
        Yes, the primer compound is dropped in wet and the case is spun to use centrifugal force to move it into the rim. In reloading spent cases the primer compound won't go into the part of the rim struck by the firing pin. If by chance the case lines up so that the firing pin hits there again it would fire but if the case is rotated a little it will. Odds are it will hit in a new spot. Even new ammo will some times get a bad spot in the rim with no priming compound and if the case is rotated and tried again it will go off. Not only that, but for accuracy you want a consistent amount in each case and distributed evenly, if not it is like having different powder loads in each case.

        If you really want match accuracy from rim fire ammo, you are going to be sorting cases by rim thickness. Even in match ammo, you would be amazed at the differences in case size and rim thickness can be in the same box. Most hand loaders doing center fire match ammo are use to sorting bullets before loading, same type of thing. Accuracy takes a lot of prep time before you ever get to the range.
        sigpic50BMGBOB aka 50BMGLAZARUS aka 50BMGZOMBIEBOB aka the UN- DEAD!

        Comment

        • #34
          stilly
          I need a LIFE!!
          • Jul 2009
          • 10685

          Yeah that was another obstacle, how do you get that part of the rim pushed back out? You would have to seal it up and blow or extrude something into it to push out the dent...

          Of course I think the OP was talking about wanting to just remove the top off some .22 and make quieter ones...
          7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...

          Need GOOD SS pins to clean your brass? Try the new and improved model...



          And remember- 99.9% of the lawyers ruin it for the other .1%...

          Comment

          • #35
            Germz
            Vendor/Retailer
            • Apr 2013
            • 4691

            Originally posted by CSACANNONEER
            There are certain things that do not need to be on youtube. When you are advanced enough to reload rimfire or load duplex rounds, you'll know where to look for guidance. Until then, there is no reason to make a video that some moron will try to follow and loose a finger, eye or worse doing so.
            like that doesn't happen already? Youtube also has legal advice channels, doesn't mean you should watch those vids and walk into court, pro se.
            I love that your post is encouraging the restriction of knowledge to the public because the common, inexperienced person is more than likely incapable of learning or being trusted to handle such power (of knowledge). Have you been hanging around your liberal friends lately?
            Last edited by Germz; 07-08-2013, 4:18 AM.
            Retired Account

            Comment

            • #36
              CSACANNONEER
              CGN/CGSSA Contributor - Lifetime
              CGN Contributor - Lifetime
              • Dec 2006
              • 44094

              Stilly,

              CH4D lists .22lr reloading dies, shell holder and trim die.
              NRA Certified Pistol, Rifle, Shotgun and Metallic Cartridge Reloading Instructor
              California DOJ Certified Fingerprint Roller
              Ventura County approved CCW Instructor
              Utah CCW Instructor


              Offering low cost multi state CCW, private basic shooting and reloading classes for calgunners.

              sigpic
              CCW SAFE MEMBERSHIPS HERE

              KM6WLV

              Comment

              • #37
                milotrain
                Veteran Member
                • Apr 2011
                • 4301

                Originally posted by stilly
                Why not just make some nitrogen tri-iodide?
                Oh delightful, we've just replaced making something which may very well liquify your lungs in the process with something that WILL explode if looked at funny. You'd need something to make the NI3 more stable or it will set off the moment it's dry and you pick the casing up. Hell if you try to spin the casing to wick the NI3 into the rim it will likely go off even when wet.

                Read below about NI3. There is a reason why a thread in a chemistry forum about the stuff has become an "old war stories" thread.
                Last edited by milotrain; 07-08-2013, 10:36 AM.
                weg: That device is obsolete now. They replaced it with wizards.
                frank: Wait a minute. There are more than one wizard? Is [are?] the wizard calibrated?

                Comment

                • #38
                  stilly
                  I need a LIFE!!
                  • Jul 2009
                  • 10685

                  Originally posted by CSACANNONEER
                  Stilly,

                  CH4D lists .22lr reloading dies, shell holder and trim die.
                  I am going to go there and have a closer look but I tell you WHAT.

                  A BIG part of BT Sniper's ads talk about taking CH4D dies and modifying them, or just buying them from him. Either he gets the dies from them as a STARTING point and then modifies them or he buys them straight and possibly sells them AS IS and you get to take your pick what you want. How close have you looked at those dies?

                  I think you might be mistaking. If you are here and looking: http://www.ch4d.com/dies/calibers/ca...caliber&page=2

                  Then they have dies for THOUSANDS of calibers, wildcats and all, but the one die set that states it is for 22LR says it is made for a .224 bullet and you need to send a sample shell or something. This might be for wildcats or something but I do not think that it is meant for the .22lr that we know and love.
                  Our specialty is wildcat and obsolete caliber reloading dies. With a reloading die Caliber List of over 2,000 calibers, you will have to work hard to find one we haven't made. But if you do, just send us the dimensions, and we'll make it!
                  This is why I say that. I do not know what kind of projectile is made to be jammed into a 22lr but that is only half the issue here and I do not see anything listed that talks about and special procedure it would take to open up the rim or drop in a primer.

                  So, give me a day or two and I will have more info here hopefully...

                  Yeah! Nitrogen Tri iodide rules! I figured that since the mercury fulminate would prolly kill you before you got to put it in, at least with the nitrogen tri iodide you would get to touch your shell after priming it...
                  Last edited by stilly; 07-08-2013, 11:06 AM.
                  7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...

                  Need GOOD SS pins to clean your brass? Try the new and improved model...



                  And remember- 99.9% of the lawyers ruin it for the other .1%...

                  Comment

                  • #39
                    robert101
                    Senior Member
                    • Sep 2009
                    • 1997

                    Interesting to chase accuracy with a 22LR round. I still don't get the attraction as you are pulling a less than perfect lead bullet and re-using same bullet in a reduced charge. Has anyone done this and achieved good or better results than a 22 claiber centerfire round? If the accuracy of the rimfire is not comparable I still don't get why the effort is so notable. No insult here I'm just not on board with the work vs. out come.

                    Comment

                    • #40
                      JagerDog
                      I need a LIFE!!
                      • May 2011
                      • 15888

                      There are published low velocity loads for .223 using small amounts pistol powder.

                      I've seen reference to using primer only or just a pinch of pistol powder and seating .22 cal air rifle pellets too.

                      That would prolly be my direction.
                      Palestine is a fake country

                      No Mas Hamas



                      #Blackolivesmatter

                      Comment

                      • #41
                        Major Danger
                        Member
                        • Aug 2010
                        • 110

                        Well the ch4d 22lr 3-die set is $95, twice what I've paid for any of my other dies. I think I'll try to find some .22 round lead balls for air rifles or maybe just pellets and see if I can seat them with my thumbs into a spent case and go from there. I'll try a primer only, then work up powder charges if it makes sense.

                        Any ideas for a pliers style crimping tool that might already be commercially available for another use? Maybe for electronics or comm cabling? I'll check what Home Depot has, and look for nail gun 22 blanks while I'm there

                        Comment

                        • #42
                          stilly
                          I need a LIFE!!
                          • Jul 2009
                          • 10685

                          Originally posted by Major Danger
                          Well the ch4d 22lr 3-die set is $95, twice what I've paid for any of my other dies. I think I'll try to find some .22 round lead balls for air rifles or maybe just pellets and see if I can seat them with my thumbs into a spent case and go from there. I'll try a primer only, then work up powder charges if it makes sense.

                          Any ideas for a pliers style crimping tool that might already be commercially available for another use? Maybe for electronics or comm cabling? I'll check what Home Depot has, and look for nail gun 22 blanks while I'm there
                          For what it is worth, I was given this reply from CH4D

                          People use them to create special loads using new primed cases. Not many people are brave enough (or crazy enough) to reprime rimfire cases.
                          I have to agree with him on this. Just hunt down some good .22 ammo.

                          If you really want to try some quiet ammo, you can do the next best thing, Get some 209 shotgun primers and I will gladly sell you a kit that turns your ARF or .225 based rifle into a pellet shooting gun with a shell that holds a .209 primer at one end and a .22cal pellet at the other end.

                          Else it would have to be .22s cat bullets...
                          Last edited by stilly; 07-08-2013, 6:56 PM.
                          7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...

                          Need GOOD SS pins to clean your brass? Try the new and improved model...



                          And remember- 99.9% of the lawyers ruin it for the other .1%...

                          Comment

                          • #43
                            Major Danger
                            Member
                            • Aug 2010
                            • 110

                            I also contacted thehuntingshack.com and asked if they had primed 22 brass anymore. They said it was a one time lot and don't know where to get any more.

                            Comment

                            • #44
                              Major Danger
                              Member
                              • Aug 2010
                              • 110

                              Originally posted by stilly
                              Get some 209 shotgun primers and I will gladly sell you a kit that turns your ARF or .225 based rifle into a pellet shooting gun with a shell that holds a .209 primer at one end and a .22cal pellet at the other end.
                              This is pretty much what I did with my ar. I seated a pellet in a primed case and fired. The 209 would have more pop, and I was thinking of how i would drill out a case to fit a 209. Is this thing something you made or bought?

                              Comment

                              • #45
                                stilly
                                I need a LIFE!!
                                • Jul 2009
                                • 10685




                                BTW, I aint gonna tell you to give up your hunt for the magical unicorn, but, well, put it on the back burner and as you look for more modern practical things, always keep in in the back of your head...
                                7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...

                                Need GOOD SS pins to clean your brass? Try the new and improved model...



                                And remember- 99.9% of the lawyers ruin it for the other .1%...

                                Comment

                                Working...
                                UA-8071174-1