Tweet
I just cleaned mine for the first time in a few years. I thought I'd never get the bolt out of the receiver. But with some patience I got it cleaned up and ready for a few 10K rounds more.
-
-
Anybody compare a standard 795 to a 795SS? I'm curious because I've never seen the problems that people note in this thread with my 795.
Got mine in '08 for $150, original buyer backed out so I got the SS for the same cost at the time as a blued model. Here it wears the old El Paso Weaver 4x Challenger.
Alot isn't a word and allot isn't the word you think it is.
I'd really like a Colt 1903 frame, bad finish okay!
I'm also looking for a good deal on a 1911 frame or two for budget/spare parts builds.Comment
-
4 for $82 shipped.
It is pricey but see bolded below.
Called CDNN and some Marlin-specific sites and no one had an ETA on them; I was told to check CDNN (
) or MidwayUSA or Brownells. Brownells has them for around $33 before shipping.
Tech sights are still on my list; love them for my Mini.
Appleseed is on the list as well. I got the 795 for Appleseed and it's fun picking a platform and building a gun for a specific purpose.
As for polishing what did you use? Dremel and Flitz? I have the overspray as well and was thinking about what to do about it. Good excuse to get a Dremel or Roto-Zip kit.
REDACTEDOriginally posted by shakes88Comment
-
I first used some 400-800 grit sand paper to cut through the overspray then a dremmel and some polishing compound (don't know brand) and gave it a few passes. I also ran some sandpaper over the sharp edges of the bolt too just want to get everything smooth.
Appleseed is on my list this year
I'll probably end up doing the 2 day I'll just have to wait and see what location it will be at when I'm ready. It does look super fun though!
I don't remember the time I was human that's why I don't understand anybody.There's danger lurking around every corner, that's why I propose we make all of our buildings round.The sound of a cat puking is the most effective alarm clock.Comment
-
Let us know how it fires as I was thinking about cleaning out that overspray (which I think you mean the black on the underside of the bolt). btw, why does Marlin put that there in the first place? esp' if it should run smoother w/o it there?I first used some 400-800 grit sand paper to cut through the overspray then a dremmel and some polishing compound (don't know brand) and gave it a few passes. I also ran some sandpaper over the sharp edges of the bolt too just want to get everything smooth.
Appleseed is on my list this year I'll probably end up doing the 2 day I'll just have to wait and see what location it will be at when I'm ready. It does look super fun though!Comment
-
Thanks for the info! I plan on doing a full takedown/cleaning in next few days.I first used some 400-800 grit sand paper to cut through the overspray then a dremmel and some polishing compound (don't know brand) and gave it a few passes. I also ran some sandpaper over the sharp edges of the bolt too just want to get everything smooth.
Appleseed is on my list this year I'll probably end up doing the 2 day I'll just have to wait and see what location it will be at when I'm ready. It does look super fun though!
Today was a good day for the Marlin; got the RimfireTech charging handle, the missing trigger from DIP, and the 4 mags from MidwayUSA all in the mail today.
TechSights will be ordered soon.REDACTEDOriginally posted by shakes88Comment
-
Just a heads up Turners Spring Sale Flyer is out!
Prices start March 30th
Marlin 795 on sale for 149.98 (Usually 159.99)
Might not be the best price considering last years prices and rebate but it's still worth it IMO
BTW Marlin 60 wood stock on sale for 159.98Comment
-
Just a heads up Turners Spring Sale Flyer is out!
Prices start March 30th
Marlin 795 on sale for 149.98 (Usually 159.99)
Might not be the best price considering last years prices and rebate but it's still worth it IMO
BTW Marlin 60 wood stock on sale for 159.98Comment
-
Big 5 has the 795 "on sale" for 164.99..... Not much of a sale.
So what do you guys think, should I just bite the bullet and go with Turners $149?
Man a lot of you guys got a sweet deal when you were getting em for 130 out the door!
I'm hoping Marlin will bring back the Rebate.
If anyone sees a cheaper instore price please let me know.
ThanksComment
-
so is there a stock available that does not require any dremel work?ΜΟΛΩΝ ΛΑΒΕ
Blessed be the Lord my strength, which teacheth my hands to war, and my fingers to fight.
sigpicComment
-
The dremeling or chiseling/coping sawing really isnt that bad at all.
There are 2 but they are not sold anymore so they will be hard to find
ATI Dragonov style
RamlineComment
-
Marlin 795 .22LR in a full metal L85 airsoft stock. Weighs about 15lbs
Using a AR15 CASV quad rail
_MG_0526 by defconskylude, on Flickr
_MG_0520 by defconskylude, on Flickr
_MG_0507 by defconskylude, on Flickr
_MG_0524 by defconskylude, on Flickr
_MG_0505 by defconskylude, on Flickr
_MG_0513 by defconskylude, on FlickrComment
-
sick setup man, but at 15lbs
Comment
-
As an update for the removing polishing inside the receiver and it shoots so nice it's so smooth like butter! When I got back from range I found that the tec sights came in the mail! Damn why didn't they come 2 hours earlier! Install was really easy. Quite good quality, though the rear sight adjustment (vertical) seems a bit small and hard to turn. But since it will be a set it and forget it.
Tried going to indoor range they were still closed but they were putting in the new backstop. It looks wicked! Maybe this coming weekend.I don't remember the time I was human that's why I don't understand anybody.There's danger lurking around every corner, that's why I propose we make all of our buildings round.The sound of a cat puking is the most effective alarm clock.Comment
There are currently 12386 users online. 144 members and 12242 guests.
Most users ever online was 239,041 at 10:39 PM on 02-14-2026.
Comment