Marlin 795 thread

[zachary]

does anyone know were to get an aftermarket metal trigger assembly for the 795?
i melted mine useing winchester "break free" bore cleaner (from walmart) thats what i get for not reading the can...

[USGI]

Usually you can find a coupon code that will cover the shipping charges if you go over $50. They sometimes come out right after the 1st of the month. Good luck!

[d sauce]

Ya pretty much. I came to realize that when I told my buddy how much it would cost for the replacement spring. He then replied telling me not to put the order in yet cause he wants some stuff too and then we can just split shipping. So this 3.99 spring is turning into a 20 to 60 dollar order. Your welcome Midway.

[wc12]

This is their way of making you spend more and I'm speaking from experience.

[d sauce]

I guess that is an idea. I don't really need anything other than that spring but I can look around and see if there is anything worthwhile.

[Merc1138]

I was cleaning my 795 tonight after taking it shooting for the first time, which was great by the way. So when I was putting it back together I thoroughly bent my recoil spring. I found a replacement spring from MidwayUSA for $4.99 plus $3.00 for shipping and handling. So long story short, does anyone know where I can buy one of these without being bent over severely. Thanks in advance.

This always happens when trying to buy one small part at a time. Buy some other stuff from midway so you aren't paying so much for shipping on just one item. I'm sure you can find ammo or something to make it worthwhile.

[XDseb]

remove the screws, start a coarse wood (or drywall) screw in one (or both) of the holes, and pull on that... Lots of room in there!

thanks for the tip...that buttplate was on there really tight. i put a ziploc bag with some ammo and one mag in there ..just in case.

[d sauce]

I was cleaning my 795 tonight after taking it shooting for the first time, which was great by the way. So when I was putting it back together I thoroughly bent my recoil spring. I found a replacement spring from MidwayUSA for $4.99 plus $3.00 for shipping and handling. So long story short, does anyone know where I can buy one of these without being bent over severely. Thanks in advance.

[PICKUPTECH22]

UTG Leapers BI-POD
BARSKA 4X32MM SCOPE

[otteray]

I think if you go back in this forum you will find a link to a few sites that clearly show the how-to:

http://www.calguns.net/calgunforum/showpost.php?p=2301811&postcount=25

[WilliamAnderson]

My 795 is out of service right now. :-( I went shooting the other day and loaded up a magazine and charged it. Ready, aim, nothing. I noticed that the trigger wasn't releasing the hammer as if the magazine dis-connect was in effect. Took it home and found out that I'm missing the little roll pin that the hammer spring is held in by.

I have no idea how it came out with all that pressure from that hammer spring behind it. I'm wondering how expensive it might get to get this fixed. I really hate working on this gun's action. Everything is plastic and fragile. Might just take it to Mayfield's and pay to get it fixed.

[rromeo]

I used 20% coupons to buy mine at Big 5.

[deebix]

yea! speak up a**hole

[Charles4400]

Found this place for 10 rounders for $12:

http://store.prairiearms.com/store/product/98505/MAR-7000-795-10RD-MAG/

Haven't gotten them in yet (scheduled to get in on Mon.) but all seems on the up and up.

BUT Their shipping is pricey (about $16) so you have to see if its worth it based on how many you want to order.

Well that was quick, when I ordered there where over 100 listed in stock now none available?

Who's buying all the mags!?

[TNP'R]

IMG_0743.jpg
IMG_0744.jpg
My first .22