Lets see your .223 California Legal Self Loading Rifle!

[L4D]

Oh, is that an Addax upper? Sweet looking stick!!

thanks. No, not an Addax upper. ASA upper receiver, DD barrel. (although Addax does use ASA side chargers to build their uppers)

Who makes your Ambi Battery Assist Device?

Phase 5 Tactical EBR-V2sc you can get one direct or from here.

http://www.adxtactical.com/store/pc/showsearchresults.asp?IDBrand=115&iPageSize=100

.

[KING_PALM]

dropped the carry handle and m961 surefire
added a troy buis and a surefire scout. ( you know since i shoot my gun at night)
added the XPS-2 Eotech as well.

[gunRfun]

Get the UBR! If you think about it.. UBR's are around 200-260 depending on who you get if from. A CTR is round 100 give or take 10 bucks. You still need to get a buffer tube spring etc. for around another 40ish dollars. If you can save around another 70 bucks or so you can get a UBR! (I think)

So I have been going back and forth on how I want to build my AR and this is basically it. Except I want AFG and Ill buy the ctr stock cuz I don't have the bank roll for that sexy one. Extremely sick rifle man.

Arteel sweet *** gun also man.

[xxINKxx]

Nothing too fancy.

Stag 2HT upper
JD machine Lower
14.5" barrel (shortened/pinned by AR15 barrels)
Eotech XPS3-0
Arms 40L BUIS
BCMGUNFIGHTER Charging Handle Mod 4 (not shown, but came in the mail an hour after the pic was taken)
DD rail covers
Magpul VFG
Magpul Moe stock w/enhanced butt pad
Magpul Moe Grip
Radlock BB
BufferTech hydraulic buffer tube

[Jeffu]

[OutlawDon]

SIGH....And once again!...
















sweet setups and pics.

[tacticalcity]

Most of my favorite gear posed along with my AR. My high speed rig and gear I usually wear while training wouldn't fit on the in the same picture, so I took two different ones.





M4gery AR15 Rifle
- Mega Gator Lower
- CMMG Upper 1/7 Twist Chrome Lined 14.7" w/ Perm A2 Hider
- CMMG Lower Parts Kit
- Daniel Defense Receiver Push Button Sling Adapter
- GI Front Barrel Mounted Sling Adapter
- Magpul MOE Grip w/ MIAD Plate for a Snug Fit
- Magpul BAD Ambi Bolt Release
- Mapul Enhanced Aluminum Trigger Guard
- Magpul Ladder Rail Cover on Top Rail
- Ambi Safety
- SureFire E2D Executive Series Light
- Larue Inline Light Mount
- Larue Tall T-1 Mount
- Aimpoint T-1 Sight
- Troy Flip-Up Rear Sight
- LMT SOPMOD Buttstock Assembly
- KAC GI 4-Rail Handguards
- KAC Rail Covers
- KAC Vertical Forward Grip
- Blue Force Padded Combat Sling 2-Pt (not pictured)
- Bullet Button by Prince50
- Solar Tactical Modified Magpul PMag Magazine Only Holds 10-Rds
- PRI Gas Buster Charging Handle

OTHER GEAR PICTURED

Glock 19, Ontario Knives USAF Survival Knife, Benchmade Griptilian Tanto Knife, Leatherman Tool (Fuse I think), Surefire G2 Nitroline w/ LED Upgrade, Surefire 6P w/ LED Upgrade, Surefire E2D LED, Luminox Color Mark Watch, Oakley Sunglasses off the LEO only site, Hatch Nomex Flight Gloves, BDS USAF ABU Stacker Tactical Vest, BDS Admin Pouch, BDS Water Blader Cover, BDS 3 Pistol Mag Pouch, Blade-Tech Holsters (light, gun, mag, and AR thigh mag), Galco Trainers Belt, Maxpedition Drop Pouch, 5.11 Boots, Flexfit Hat, Hatch Elbow and Knee Pads, Magpul 10/30 Emags

NOTE: The USAF Tactical Vest is for sale in the parts section if there are any Air Force Guys out there in need of gear. PM me or visit that section please rather than posting here as it will tick people off.

[Fate]

Who makes your Ambi Battery Assist Device?

Looks like Phase 5 came out with an even sexier model: http://www.phase5tactical.com/g_products/ebr.html

[doughboy334]

Looks like Phase 5 came out with an even sexier model: http://www.phase5tactical.com/g_products/ebr.html

How do you install the 2nd model? Do you need to drift out the upper lower bolt catch release and then install that one instead?

[L4D]

How do you install the 2nd model? Do you need to drift out the upper lower bolt catch release and then install that one instead?

The v2 is a one piece design that replaces your stock bolt release. It comes with a pin. Well mine did at least.

[doughboy334]

The v2 is a one piece design that replaces your stock bolt release. It comes with a pin. Well mine did at least.

Ah thanks. I remember asssembling my AR lower and putting that pin, catch, and spring in. I think I'll stick to the screw in bolt release

[Ruiner]

[Arteel]

I've been contemplating on the SR-15 uppers. How do you guys like them?

[Ruiner]

Love mine. Very soft/smooth shooting because of how knight's armament has the gas system set up. I don't think you'll find anyone unhappy with their SR15E3 upper

[esskay]

I've been contemplating on the SR-15 uppers. How do you guys like them?

They are also surprisingly light! Really slick system. Check with pacrimguru, I think he has some in stock.

http://www.valkyrietactical.com/product_info.php?manufacturers_id=13&products_id=1590

Oops, maybe not? Not sure, thought he did, ping him...