Unconfigured Ad Widget

Collapse

Rust Blue without immersion boiling

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • 4thSBCT
    Banned
    • Mar 2009
    • 2047

    Rust Blue without immersion boiling

    I have an Izzy Type 3 that I wanted to rust blue but had nothing big enough to boil a barreled receiver in and I was not about to remove the barrel on it. I learned that you can use the steam from a boiling pot of water instead of the boiling water itself. The advantages to this technique are you can rust blue barrled recievers and its much more controllable.



    Rusted



    I covered most of the pot to concentrate steam in one area.





    After only 1 rusting its very dark and nearly matches the original parts. I think only 1 more rusting and I'll call it finished.

    Last edited by 4thSBCT; 02-11-2011, 1:50 PM.
  • #2
    bohoki
    I need a LIFE!!
    • Jan 2006
    • 20826

    neat i would have went out and wasted my money on a section of gutter

    Comment

    • #3
      nicoroshi
      www.Buildyourownak.info
      CGN Contributor - Lifetime
      • Jan 2009
      • 3696

      Good to know info. Thanks for posting it 4th.

      >>>>>My Build Your Own AK eBooks<<<<<

      Comment

      • #4
        247Nino
        Senior Member
        • Mar 2009
        • 1858

        That looks horrible, just give me the gun and everything will be ok.



        JK, that looks goooood! I still want the gun though!
        So would you recommend this method for people who want to Rust Blue only certain areas instead of whole receivers and barreled receivers?
        Saiga 12 IZ-109
        FML-47 AK Pistols
        RUST BLUING MY M70B1/AB2

        EVERYTHING IS EVERYTHING

        Comment

        • #5
          4thSBCT
          Banned
          • Mar 2009
          • 2047

          Originally posted by 247Nino
          That looks horrible, just give me the gun and everything will be ok.



          JK, that looks goooood! I still want the gun though!
          So would you recommend this method for people who want to Rust Blue only certain areas instead of whole receivers and barreled receivers?
          just give me 1,400 and its YOURS!!!!

          Comment

          • #6
            antix2
            Member
            • Feb 2010
            • 141

            Complete Game changer!
            Please share more details. Like how long do you need to hit a part with steam and such.
            I wonder if one of those clothes steamers would work? Or a carpet steam cleaner?
            Thanks for posting.
            sigpic

            Comment

            • #7
              4thSBCT
              Banned
              • Mar 2009
              • 2047

              You could try a steamer but it might not get hot enough. I held it for few minutes and alternated areas. the trick is to hold it the right distance away. Too close and too much water builds up on the receiver. Too far away and it wont turn the rust. With this method you also don't have to worry about using only distilled water either and theres less of a mess.

              Comment

              • #8
                antix2
                Member
                • Feb 2010
                • 141

                Did you use the Classic Rust Blue from Brownells or something else?
                sigpic

                Comment

                • #9
                  4thSBCT
                  Banned
                  • Mar 2009
                  • 2047

                  classic rust blue. I pour a little into a separate container and I found the best way to go about applying it is to use a womans make up cotton pad and to apply a very VERY thin almost dry coat without over lapping any areas. Let dry for 1 hour and apply a second coat. let dry for 3- 9 hours depending on rust amounts and then steam or boil. then card. should only take 4 rustings to reach a nice dark finish.

                  Comment

                  • #10
                    4thSBCT
                    Banned
                    • Mar 2009
                    • 2047

                    Finished, It matches the originial finish dead on.



                    See any welds?

                    Comment

                    • #11
                      4thSBCT
                      Banned
                      • Mar 2009
                      • 2047



                      Comment

                      • #12
                        smoothy8500
                        Veteran Member
                        • Sep 2009
                        • 3846

                        Just curious, does the surface finish of the metal make a difference on how dark or even coloring it gets? For instance a highly polished slide vs a beadblast finish.

                        Comment

                        • #13
                          4thSBCT
                          Banned
                          • Mar 2009
                          • 2047

                          Originally posted by smoothy8500
                          Just curious, does the surface finish of the metal make a difference on how dark or even coloring it gets? For instance a highly polished slide vs a beadblast finish.
                          A highly polished surface will not take the acid very well. The acid needs a slightly echted surface to work well. If you start with a highly polished surface it will not blue very well or the blue will not be very deep and may wear off quickly. A freshly blasted surface is ideal and as you card after each rusting it will become more and more polished.

                          Comment

                          • #14
                            antix2
                            Member
                            • Feb 2010
                            • 141

                            The rifle looks amazing! Great job.
                            sigpic

                            Comment

                            Working...
                            UA-8071174-1