Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
Noob getting into reloading..
Collapse
X
-
That leaking issue is an easy fix. As per the instructions you just need to tighten the screw on the throw lever.Oppressors can tyrannize only when they achieve a standing army, an enslaved press, and a disarmed populace. -- James Madison
The Constitution shall never be construed to authorize Congress to prevent the people of the United States, who are peaceable citizens, from keeping their own arms. -- Samuel Adams, Debates and Proceedings in the Convention of the Commonwealth of Massachusetts, 86-87 (Pearce and Hale, eds., Boston, 1850)Comment
-
Ive tightened it so far that the handle would barely move and it still leaked a little bit. I found a happy medium to where I can actually manipulate the handle and only get a small amount of powder spilling out.
In the end I learned to live with it, its not that big of a deal and doesn't affect the powder it throws.Comment
-
It's funny how I never hear any one who actually teaches new reloaders how to roll their own say that a single stage is a waste. Reloading is a hobby in and of itself. I have more than a few presses and most of them are single stage presses. That doesn't mean that I don't load a lot on progressives but, I also use single stage presses often. I even know commercial reloaders who load custom loads on SS presses. It all depends on what the OP is looking to do.NRA Certified Pistol, Rifle, Shotgun and Metallic Cartridge Reloading Instructor
California DOJ Certified Fingerprint Roller
Ventura County approved CCW Instructor
Utah CCW Instructor
Offering low cost multi state CCW, private basic shooting and reloading classes for calgunners.
sigpic CCW SAFE MEMBERSHIPS HERE
KM6WLVComment
-
QFT! I really think that I am not getting into reloading to save time, I am getting into it because I am a tinkerer. I have a degree in Computer Science and love the interesting intricacy of reloading rounds and try to make it custom fit to my firearms and to save in cost. If I was to worry so much about time, I think I would have just gone down to Ammo Depot or a local shop and bought hand-loaded/reloaded rounds. My main focus is having a hobby around my interest in firearms beyond just shooting and I want to enjoy the art of reloading.
I think my position right now is getting as much as I can to have a good foundation to build upon to have the utmost cost effective way to reloading, handgun, rifle, and shotgun rounds. I thought the turret press can be used as a single stage press and once I get used to it and if I just need to pump out a bulk amount of say 45acp I could get it done by modifying it into a progressive down the road??? That would be my motivation to get a turret versus a single.Last edited by adramalech916; 07-28-2014, 5:55 PM.Comment
-
It's been around a year since I got into reloading, and after many thousands of rounds, here's the advice I wish someone had given me:
Reloading is kinda fun. It's not for everyone, and if I had the means, I'd probably just buy ammo. But since I don't, its a terrific way to shoot a lot with minimal cost, and fills in my empty time instead of watching a lot of TV.
Regardless of your financial situation, I would still start with the basic starter kit from Lee
Now everyone will say that Lee is the cheapest, and single stage presses get old fast, but you don't want to buy the expensive latest and greatest and come to realize that you don't dig it. Make the entry as financially painless as possible. And you'll use the single stage press for lots of things, even after you have an expensive progressive press. Then buy one set of dies in your favorite pistol caliber, spend $10 extra and get the carbide steel 4 die set. Also get a pair of calibers to gage everything. I use the cheap digital one from Harbor Freight.
And finally you'll want a way to clean the brass. My favorite way is using stainless steel media, after depriming using a universal deprimer (this saves the die from a dirty case). I've tried the walnut shells, the corn cob, the ultrasonic cleaner; however, stainless steel media just cleans so beautifully for the amount of time.
My recommendation to the newbie would cost $300 to get into reloading, using Lee Equipment and Harbor Freight. Here's the breakdown using MidwayUSA.com and Harbor Freight prices:
From Midway
$130 Lee Challenger Press Kit
$40 Lee 4 piece carbide dies for pistol
$6 Universal reloading tray
$13 Lee Universal Deprimer
$25 for a current reloading book
From Harbor Freight
$50 Dual Drum Rotary Rock Tumbler
$15 6 in digital calibers
From http://300aacbrass.com/stainless_steel_tumbling_media:
$25 for 2 pounds of stainless steel pins (1 lb per rock tumbler drum)
If after reloading 300-500 rounds, and you kind of enjoy it, I would upgrade to a progressive press, either the Hornady LNL Progressive, or the Dillon 550 or 650. That'll put you back another $450 or more. I would forego the turret press, but that's just me.
Maybe you're sure that progressive or turret press is for you, and getting a single stage is a waste of money. I would still disagree. To get a really clean bullet case, you want to deprime before you clean it. When you deprime, it gets messy. You can either get your progressive messy, which takes a lot of time to clean, or get a singe stage messy, which takes 3 minutes to clean and relube.
For beginner, my recommended procedure would be:
1. Deprime brass using Lee Challenger Single Stage Press and Lee Universal Deprimer Die
2. Clean brass using the stainless steel media in a Harbor Freight Dual Drum Rotary Rock Tumbler with a pinch of Lemishine from Walmart and Dawn dish soap, for 2 hours. See YouTube for great videos on this method.
3. Let Brass dry overnight.
4. Inspect each piece of brass for damage (now that it's clean). Checking the brass with the digital calibers.
5. Reload on your single stage press.
There is a lot I left out, but people write books about how deep you can go. Again, watch all of the reloading Youtube videos you have time for. Read reviews online of each piece of equipment you want to buy. Read & re-read your reloading handbook. Shop for deals at MidwayUSA.com, DVOR.com, etc.
The 1st 100 rounds are daunting. The 2nd 100 rounds o.k. If you make it to 300 rounds, and still kind of enjoy it, you're ready for a progressive.
But you'll want to keep that single stage press. You might decide to use a full length sizing die for your 40 cal or 10mm brass, like the Redding GTRx die: you'll want a single stage press. You may take up lead casting & powder coating your bullet: you'll want the Lee Push through die and single stage press. You may get a Lee-Enfield rifle and reload the occasional 303 British: you'll want a single stage press.
After you're sure reloading is something you want to keep doing, then I would start buying more dies for my other calibers. Then I would learn the extra steps for reloading rifle rounds. Then I would start shopping around for a progressive press.
Anyway, that's what I wish someone had told me.
Good luck!Comment
-
Hey thanks for the reply! Yea, I am kind of going back and forth. I think the best thing going for me is that I have a couple friends that like to shoot and would be interested in using handloads for their firearms, which would get me somewhat free practice for calibers I don't own, like .223, and .30-06.It's been around a year since I got into reloading, and after many thousands of rounds, here's the advice I wish someone had given me:
Reloading is kinda fun. It's not for everyone, and if I had the means, I'd probably just buy ammo. But since I don't, its a terrific way to shoot a lot with minimal cost, and fills in my empty time instead of watching a lot of TV.
Regardless of your financial situation, I would still start with the basic starter kit from Lee
Now everyone will say that Lee is the cheapest, and single stage presses get old fast, but you don't want to buy the expensive latest and greatest and come to realize that you don't dig it. Make the entry as financially painless as possible. And you'll use the single stage press for lots of things, even after you have an expensive progressive press. Then buy one set of dies in your favorite pistol caliber, spend $10 extra and get the carbide steel 4 die set. Also get a pair of calibers to gage everything. I use the cheap digital one from Harbor Freight.
And finally you'll want a way to clean the brass. My favorite way is using stainless steel media, after depriming using a universal deprimer (this saves the die from a dirty case). I've tried the walnut shells, the corn cob, the ultrasonic cleaner; however, stainless steel media just cleans so beautifully for the amount of time.
My recommendation to the newbie would cost $300 to get into reloading, using Lee Equipment and Harbor Freight. Here's the breakdown using MidwayUSA.com and Harbor Freight prices:
From Midway
$130 Lee Challenger Press Kit
$40 Lee 4 piece carbide dies for pistol
$6 Universal reloading tray
$13 Lee Universal Deprimer
$25 for a current reloading book
From Harbor Freight
$50 Dual Drum Rotary Rock Tumbler
$15 6 in digital calibers
From http://300aacbrass.com/stainless_steel_tumbling_media:
$25 for 2 pounds of stainless steel pins (1 lb per rock tumbler drum)
If after reloading 300-500 rounds, and you kind of enjoy it, I would upgrade to a progressive press, either the Hornady LNL Progressive, or the Dillon 550 or 650. That'll put you back another $450 or more. I would forego the turret press, but that's just me.
Maybe you're sure that progressive or turret press is for you, and getting a single stage is a waste of money. I would still disagree. To get a really clean bullet case, you want to deprime before you clean it. When you deprime, it gets messy. You can either get your progressive messy, which takes a lot of time to clean, or get a singe stage messy, which takes 3 minutes to clean and relube.
For beginner, my recommended procedure would be:
1. Deprime brass using Lee Challenger Single Stage Press and Lee Universal Deprimer Die
2. Clean brass using the stainless steel media in a Harbor Freight Dual Drum Rotary Rock Tumbler with a pinch of Lemishine from Walmart and Dawn dish soap, for 2 hours. See YouTube for great videos on this method.
3. Let Brass dry overnight.
4. Inspect each piece of brass for damage (now that it's clean). Checking the brass with the digital calibers.
5. Reload on your single stage press.
There is a lot I left out, but people write books about how deep you can go. Again, watch all of the reloading Youtube videos you have time for. Read reviews online of each piece of equipment you want to buy. Read & re-read your reloading handbook. Shop for deals at MidwayUSA.com, DVOR.com, etc.
The 1st 100 rounds are daunting. The 2nd 100 rounds o.k. If you make it to 300 rounds, and still kind of enjoy it, you're ready for a progressive.
But you'll want to keep that single stage press. You might decide to use a full length sizing die for your 40 cal or 10mm brass, like the Redding GTRx die: you'll want a single stage press. You may take up lead casting & powder coating your bullet: you'll want the Lee Push through die and single stage press. You may get a Lee-Enfield rifle and reload the occasional 303 British: you'll want a single stage press.
After you're sure reloading is something you want to keep doing, then I would start buying more dies for my other calibers. Then I would learn the extra steps for reloading rifle rounds. Then I would start shopping around for a progressive press.
Anyway, that's what I wish someone had told me.
Good luck!
I also am looking into a bolt-action .308 as my first bolt-action rifle. I mostly in the past have stuck with semi-auto 5.56x45mm and 7.62x51mm. I heard if I can become an expert at .308 I should be able to extend out the range of a popular and plentiful caliber.Comment
-
I'm about 9 months into this hobby now, and I can tell you it can take a life of its own. I started with a single stage & was thinking I would stay there for quite a while...until I actually loaded pistol rounds on it. Fughedaboutit!!!
If you're a gadget guy, then reloading is a dream. You'll spend hours reading websites, reviews, reloading manuals, and the the best part - accessory shopping. Then the real fun starts when you become a powder fiend, looking to get your next score whenever & wherever you can. This goes on until you either run out of money, or all of your available storage space is jam packed with powder/primers/bullets.
This is my setup now. I don't have the luxury of tons of space, so I had to condense everything into my office, & went with a pretty basic Kobalt from Lowe's.

What I have found that works best for me is precision .308 & .223 on the single stage. Cutting em down to size w/ the Wilson trimmer. Neck turning, Redding neck bushings & body dies, etc.
For .223 plinker loads & .40 - on the progressive. Once you use one, you won't go back to the SS except for maybe load development. Trim volume rifle brass w/ the Dillon Rt1200. I also use an RCBS X-die so I only have to trim once.
Lastly, go with Stainless Steel wet tumbling if you can. Brass comes out looking like jewelry. I went with the Frankford Arsenal tumbler & couldn't be happier.
The next level is separate Dillon 1050s for brass processing & loading, multiple toolheads, many thousands of dollars, and the list goes on. You can take it as far as your wallet & free time will allow. Good luck!Comment
-
It's funny how I never hear any one who actually teaches new reloaders how to roll their own say that a single stage is a waste. Reloading is a hobby in and of itself. I have more than a few presses and most of them are single stage presses. That doesn't mean that I don't load a lot on progressives but, I also use single stage presses often. I even know commercial reloaders who load custom loads on SS presses. It all depends on what the OP is looking to do.
I think it could be a waste.
But I was thinking of this whole scenario and here is maybe how it goes:
Folks should start with a turret; ANY turret because it is easy, but we ALL know that the Lee is the fastest turret hands down ESPECIALLY when you toss in how much it costs. Then, those folks that have to go faster; they can go get a progressive. But those folks that might want to do odd things, they can pick up a single stage.
So really nobody needs a progressive or a single stage until they decide that they need it.
BUT the one thing that blows up that line of thought is that there are SOME folks that just like the simplicity of the single stage. I dunno what it is, but hey. Who am I to tell a new reloader that they should not want such simpleness... So, I think now that it really should be tailored to WHAT they think they wanna do. BUT if ANY amount of speed or quantity of rounds are desired, then that screams turret over single stage.
I aint knocking either of them, just saying. I started on a turret, I now have all three, but only my turret and single stage are setup; the progressive is still in the box...
And BTW, Mike402, THAT is a perty picture...Last edited by stilly; 08-03-2014, 10:22 PM.7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...
Need GOOD SS pins to clean your brass? Try the new and improved model...

And remember- 99.9% of the lawyers ruin it for the other .1%...Comment
Calguns.net Statistics
Collapse
Topics: 1,870,760
Posts: 25,175,690
Members: 358,862
Active Members: 5,399
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 31143 users online. 158 members and 30985 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment