Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
Noob getting into reloading..
Collapse
X
-
NRA Range Safety Officer pistol and reloading instructor
https://www.facebook.com/pages/HL-Se...=photos_stream -
I know it is tempting to buy all this stuff but there is a lot of people who never make the investment back. Depending on where you live you may want to look into the LEE hand press kit and then a powder drop, scale and die sets. The only extra money that you will spend is the hand press and honestly if you ever load in the field or go camping and want to load you can use it there. I moved to an apartment and yay it is a lot slower than my progressive, but it is nice to fit all my reloading stuff in a back pack. I don't even use my tumbler anymore. I just swish and soak my dirty brass in a bucket with dish soak, rinse well and it dries really quick since it is summer and it is really clean. The brass may not be shiny new but it is really clean. If you decide to go full bore like I did, honestly what is an extra $50.00 in the long run for a piece of equipment that you can always use as a backup anyways.
Believe it or not when I started reloading I decided on a $30.00 LEE CLASSIC LOADER IN 45ACP, $2.00 mallet and $2.00 slide caliber from harbor freight. It made awesome ammo and taught me the basics in the simplest terms. Here is my $10.00 used loader in 308. and my 223 loader.
CALGUNS DICTIONARY "FLIER": when a shooter wants to turn a 1 inch group to a half inch group because he flinched.Comment
-
Yeah but they are also buying several books, shotshell stuff and the whole shebang in one shot essentially...
For metallic reloading it sure is too much to start, but this is metallic AND shot they are buying for. Which means about 300+ each if you split it down the middle...
AND, they are getting some cool accessories. I would keep only a Lyman and Lee book myself and maybe a shot shell book and then toss the others, but that is me.
I hope they use the SHOP42A.com link for amazon... :O
Did you read his first post? 9mm, .45, .223 and .308...I know it is tempting to buy all this stuff but there is a lot of people who never make the investment back. Depending on where you live you may want to look into the LEE hand press kit and then a powder drop, scale and die sets. The only extra money that you will spend is the hand press and honestly if you ever load in the field or go camping and want to load you can use it there. I moved to an apartment and yay it is a lot slower than my progressive, but it is nice to fit all my reloading stuff in a back pack. I don't even use my tumbler anymore. I just swish and soak my dirty brass in a bucket with dish soak, rinse well and it dries really quick since it is summer and it is really clean. The brass may not be shiny new but it is really clean. If you decide to go full bore like I did, honestly what is an extra $50.00 in the long run for a piece of equipment that you can always use as a backup anyways.
Believe it or not when I started reloading I decided on a $30.00 LEE CLASSIC LOADER IN 45ACP, $2.00 mallet and $2.00 slide caliber from harbor freight. It made awesome ammo and taught me the basics in the simplest terms. Here is my $10.00 used loader in 308. and my 223 loader.
http://www.youtube.com/watch?v=HOpQVOBUq34
Although I agree that the lee classic loader is cool, I think that it along with the handpress might be kinda like busting out your swiss army knife at dinner to cut a piece of steak. WHY? They got steak knives for that. Also, I have a hunch that OP is gonna be shooting a bit more and wants to load some 9/45/223 for some semi auto work. If that is the case, then that right there tells me to start with a press. Although it would be a good idea to find a JR3 or JR2 on Fleabay for around $60 and use IT to resize bottle necked cartridges, that is something they need to decide if they have room for or want to do it. It IS a good way to go and as Cannoneer stated, Just about EVERYBODY has a single stage press no matter HOW many others they have. For me it was my second purchase after I already had a Lee Turret. Well, my second PRESS purchase. Now though I am thinking of upgrading my JR3 to a T-7 so that I can have the rigidity of the single stage but with the versatility of the turret, then I can load up my resizing dies, pocket swaging dies and x-dies for .223 and .308 and be done with it all...Last edited by stilly; 07-27-2014, 2:55 PM.7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...
Need GOOD SS pins to clean your brass? Try the new and improved model...

And remember- 99.9% of the lawyers ruin it for the other .1%...Comment
-
With a single stage press, its a massive waste of time to load 50 rounds start to finish. It just takes waay too long. You waste a lot of time changing and dialing in dies.
Do it in stages, in bulk, and its much more efficient. Ill prime and size 500 cases in one shot. Takes less than a couple hours. Then flare all of them, which takes less time. I do 100 at a time after that, start to finish, and it goes quickly.
Ive done thousands through my lee single stage press. I suppose it would be nice to do them faster, but its plenty to crank out really accurate ammo, fast.
If you shoot weekly, its fast enough to have 300 rounds a week ready to go, without spending much more than a couple nights, a few hours a night, getting them ready.Comment
-
NRA Certified Pistol, Rifle, Shotgun and Metallic Cartridge Reloading Instructor
California DOJ Certified Fingerprint Roller
Ventura County approved CCW Instructor
Utah CCW Instructor
Offering low cost multi state CCW, private basic shooting and reloading classes for calgunners.
sigpic CCW SAFE MEMBERSHIPS HERE
KM6WLVComment
-
Yay I did read his post, hence the reply. I was worried I missed something, but nope I didn't
Did you read his first post? 9mm, .45, .223 and .308...
Although I agree that the lee classic loader is cool, I think that it along with the handpress might be kinda like busting out your swiss army knife at dinner to cut a piece of steak. WHY? They got steak knives for that. ...
You are right, but then again why buy a fancy steak knife if you only eat steak on a rare occasion. I do agree that the OP most likely will load enough to justify the $500.00 investment which if he gets into loading a lot, he will spend that much over time. Ammo is reasonable again and 223 and 308 plinking ammo is not a whole lot more than what reloading will save. Plus it is nice to relax on the couch or table and take your time with the hand press batch loading like previous post have said. Lots of avenues to get into reloading, some just cost a lot less and accomplish the same thing, of course at a lot slower pace.
To the OP : Feel free to sit back and let the rest of us debate this, it is the best part of Calguns
I've seen threads go for pages after the OP got their answer and moved on. You should ask about Lubing cases with Carbide dies ( I do ).
Last edited by stand125; 07-27-2014, 7:44 PM.CALGUNS DICTIONARY "FLIER": when a shooter wants to turn a 1 inch group to a half inch group because he flinched.Comment
-
Well I am certainly no expert in reloading, just NRA certified (toot toot!)...
And I can see what you are saying, but I would equate using the hand press as taking a skateboard to work (17 miles away) each day. Sure, it is fun and you can do tricks on it, but it is a HELLA lot of work in comparison to driving a car to work.
But hmmm. Fancy steak knife when you eat steak rarely? Then I guess you would get it because it does not cost too much and because it works better than a fork or butterknife. :\
But then again, I might have read that wrong since I eat steak about once or more a week now. (nothing fancy, just london broil on sale, buy 15 lbs at a time and cook 3-5 each week...) Funny though, I am in the process of searching for BETTER steak knives because these diamond cut things are POS with a HUGELY CAPITOL POS... Freaking Paring knives work better... And those german ones that came with the omaha steaks SUCK. They get destroyed in the dish washer...
YEah I dunno though, I can see the hand press for decapping, in fact, I DO use mine for decapping. Decapping only. The instructions said it was best for smaller calibers, but .45 or larger and you need a considerable more amount of force. I dunno what that means because I never reloaded on it; maybe I will resize a .45 and see how hard it is and get back to yas...7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...
Need GOOD SS pins to clean your brass? Try the new and improved model...

And remember- 99.9% of the lawyers ruin it for the other .1%...Comment
-
I would much rather load on a press than my hand press, it is easier. The thing that is tough with the hand press and rifle is not so much resizing, but it is some work to extract the case from the die ( expander ball ) and your palms get pretty sore.CALGUNS DICTIONARY "FLIER": when a shooter wants to turn a 1 inch group to a half inch group because he flinched.Comment
-
I'd get the Hornady book. It is much better than the Lyman 49th edition.Oppressors can tyrannize only when they achieve a standing army, an enslaved press, and a disarmed populace. -- James Madison
The Constitution shall never be construed to authorize Congress to prevent the people of the United States, who are peaceable citizens, from keeping their own arms. -- Samuel Adams, Debates and Proceedings in the Convention of the Commonwealth of Massachusetts, 86-87 (Pearce and Hale, eds., Boston, 1850)Comment
-
Yeah, I never even thought about case lube. That along with the hand press = messy as a mofo.
Hand press only to decap for me...7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...
Need GOOD SS pins to clean your brass? Try the new and improved model...

And remember- 99.9% of the lawyers ruin it for the other .1%...Comment
-
If you don't have a bench then a hand press fits.
Lube/mess is not an issue if you pre-lube the cases.
Precision reloading is not about speed. You should not cycle your press like an AR-15.
People who don't enjoy reloading have no soul.Single stage does tend to get old for pistol reloading but it depends on if you enjoy the reloading. I really like it and I like the quality control. They're so inexpensive I recommend starting with one. If you decide you want to get something else later you still have a backup or you can resell it and barely take a hit.Comment
-
Dillon case lube leaves no mess.Oppressors can tyrannize only when they achieve a standing army, an enslaved press, and a disarmed populace. -- James Madison
The Constitution shall never be construed to authorize Congress to prevent the people of the United States, who are peaceable citizens, from keeping their own arms. -- Samuel Adams, Debates and Proceedings in the Convention of the Commonwealth of Massachusetts, 86-87 (Pearce and Hale, eds., Boston, 1850)Comment
-
The case lube is fine, it's the fact that you are pulling on two short metal handles to get the press open and do that enough times with a 223 cartridge and it gets a little uncomfortable. It's funny, but I load for my MVP with my LEE CLASSIC LOADER exclusively because it is so easy to use and I only shoot maybe 25 rounds per range trip so I got plenty of time between trips.
I had my Dillons and Loadmaster and turret presses through the years for my auto guns, but for the Bolt actions I love plopping down on the floor with a pad beneath my butt and my 2X4 work station and just take my time. I will guarantee that once I get back into a place with an area to reload I will be back on my Progressive, but for now the hand press lets me still load for everything and I have a small range bag that fits it all.CALGUNS DICTIONARY "FLIER": when a shooter wants to turn a 1 inch group to a half inch group because he flinched.Comment
-
Well Kudos to you for being able to do that and may you get back to it soon.
I HAD thought about taking my handpress to a range and loading up a .45 or a 9mm shell and seeing how many times I can load it before it breaks...
Maybe one day...7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...
Need GOOD SS pins to clean your brass? Try the new and improved model...

And remember- 99.9% of the lawyers ruin it for the other .1%...Comment
-
Ill give you my personal opinion, having not read the rest of the thread im sure its already been said, and im also quite sure many will disagree with me:Hello,
I am currently looking to get into reloading to maximize my ability to shoot and flex my spending. I am trying to be smart and not break the bank. I have been researching alot in the past couple days and I have found to be on the fence for my first press, a good powder scale, powder dispenser, calipers, and case trimmers.
I will mostly be reloading: 9mm, 45acp, 223/5.56mm, and 308/7.62mm.
I have read that buying one of the different "starter kits" will get me started down the right path, but I will most likely will be wasting some money on things I will either; A. won't use, or B. will have to replace with more accurate, or more reliable parts. So I am probably looking at buying the parts separate as my initial reloading solution.
For a press:
I was thinking a good single stage press, as I am not going to be shooting too much to validate using a progressive press. Is it better to have a 3/4 stage turret versus a single stage? From what I have read a single stage is cheaper, and a turret allows for more flexibility and less time consuming as a single stage but costs a little bit extra.
For a good way to measure powder:
I have seen a good old balance as a good way to go, but can be not as accurate as an electronic scale, however many electronic scales can be more expensive and not as accurate as they say they are leading to having to manually check them twice. Would it be good to splurge on something like a RCBS ChargeMaster or another electronic solution versus a manual scale solution?
For dispensing powder:
Lee and RCBS has some plastic powder dispensers. I do seem to have read numerous reviews stating that they are not ideal and would lead to overcharging and inaccurate loads. Would going with a more electronic dispenser be more ideal or is just splitting hairs?
For a good set of case trimmers:
I did like the Lee case trimmers which could be set as a stage in a press. Seem to be good way to go with that, is there any pros with going with a separate station that just does case trimming like the Horandy Camlock case trimmers? Does it make it more accurate, or is it negligible?
Thanks for any and all help I can get in this matter.
Press: I personally dislike turret presses, at least the Lee one I used. The reason is I don't process 1 round at a time on a turret, I still use it like a single and process 100 rounds at a time before moving on to the next step. I do this because Ive found it to be more consistent and result in less mistakes. Its also much easier to oversee 100 charged cases in a tray before proceeding to the bullet seating step.
You can use most Turrets as a single stage, but ive found they don't make for very comfortable loading and just aren't great single stage presses. The main benefit I would get from a turret is the ability to keep the dies set up and not have to adjust them, which doesn't bother me all that much, and you would lose the settings when you changed calibers.
Scale: I absolutely hate beam scales, some may say they are more accurate and reliable, and they may be right, but I don't do the kind of loading where I would even notice a difference in margin of error. Ive been using a $25 drug dealer scale I bought at a headshop for years. It worked great. I upgraded to a $25 hornady scale a little while ago only to notice its nearly identical to the old one I had, only it came with calibration weights and had hornady emblazoned on the cover.
If found these cheap electronic scales to be plenty accurate, and take up very little space. Sensitivity goes to a tenth of a grain and that's fine for me.
Powder measures: The metal RCBS/Hornady ones sure are nice, but ill tell you the plastic Lee one works just fine. It throws charges just as accurately as anything else ive ever used. My biggest complaint is that super fine powders like H110 leak out the side a little.
Case Trimmer: If your going to load 1 or 2 rifle cartridges in any sort of bulk I wouldn't hesitate to blow $30 on a CTS/WFT/Possum Hollow case trimmer for each caliber. It saves so much time and is just so worth it. If your going to be doing 20 round batches of 10 different calibers get the cheap Lee lock stud trimmer, its like $5 and $5 or so for each additional caliber.Comment
Calguns.net Statistics
Collapse
Topics: 1,870,750
Posts: 25,175,571
Members: 358,862
Active Members: 5,399
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 28892 users online. 138 members and 28754 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment