Unconfigured Ad Widget

Collapse

Dillon Press for CHEAP

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #31
    HighLander51
    Banned
    • Feb 2010
    • 5144

    Originally posted by krazykj03
    Ok guys I was half way right and half wrong. Well he has 2 presses. 1 square b and the other is a RL 550. Are these a good deal for $200 each. Missing some pieces. The 550 has a 45 acp die, a 4 set. And the square b I don't know what caliber but it has dies on it. Missing pieces too. Should I get both or just the 550.

    Plus what is the difference between the 550 and 550B.


    Sent from my iPhone using Tapatalk
    Ok, my offer is $250 each.

    Comment

    • #32
      five.five-six
      CGN Contributor
      • May 2006
      • 34870

      Originally posted by milotrain
      I don't think they made a 450 with that vent hole on the rear upper spine. They did make one with a "trussed" front spine but it says RL450 in big casting on the rear spine so it would be obvious if it was a 450. Can't tell in the photo. Actually with the primer wheel, and the printing on the ram support I'm fairly sure it's a 550.
      It looks like it started life as a 450 and was upgraded to a 550, that works just fine. It has the autoprime.

      Comment

      • #33
        krazykj03
        Member
        • Dec 2010
        • 112

        Originally posted by HighLander51
        Because it's a commercial press. Everything else, is forever. The OP is not reloading for profit...

        Which Dillon presses do you have?
        its a square deal b and a RL 550 no 450 here.
        Brass Processing in SoCal: http://www.calguns.net/calgunforum/s...1#post13649691

        Comment

        • #34
          gemoose23
          Senior Member
          • Jun 2009
          • 1079

          I'll take then both! . IMHO still a good deal.... Not as internet meme worthy but still very solid. 450/550 & squareb stripped go for 300+ on ebay.

          Sent from my SCH-I500 using Tapatalk
          Hornady LnL, Dillon Precision, RCBS, Lee Precision and Lyman User
          If You want Match or Leadless hunting Ammo check out Monolithic Munitions Yes I am a shill, friends with the owners.

          Comment

          • #35
            XxWoodsHunterxX
            Senior Member
            • Nov 2009
            • 1698

            Why can't I have friends like this

            Comment

            • #36
              stilly
              I need a LIFE!!
              • Jul 2009
              • 10685

              Originally posted by krazykj03
              Hi i was wondering if this is a good idea, i have a coworker that is selling a Dillon 550 and 650 for $250 each, i dont know what it comes with or if its just the press? i will take a look at it this weekend if they are the 550 and 650 i think imma just have to suck it up and buy them both. im hoping it comes with some other stuff.

              Also what is the warranty on Dillon for things like this? to send it back and maybe get the newest model has anyone tried? just wondering if it is even worth the buy. Thanks guys
              I HATE Dillon because of the cultic following. I HATE Dillon because they have great customer service that I would prolly rarely use.
              I HATE Dillon just because I would rather go the other road.

              With that said, if my friend offered me a 650 and 550 for $250 each, I would take them in a heartbeat.

              I would keep the one I liked more and sell the other for slightly more than what I paid. Then I would go buy a Dillon hat and wear it whenever I use the press...
              7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...

              Need GOOD SS pins to clean your brass? Try the new and improved model...



              And remember- 99.9% of the lawyers ruin it for the other .1%...

              Comment

              • #37
                knucklehead0202
                Veteran Member
                • Aug 2008
                • 4087

                Originally posted by stilly
                I HATE Dillon because of the cultic following. I HATE Dillon because they have great customer service that I would prolly rarely use.
                I HATE Dillon just because I would rather go the other road.

                With that said, if my friend offered me a 650 and 550 for $250 each, I would take them in a heartbeat.

                I would keep the one I liked more and sell the other for slightly more than what I paid. Then I would go buy a Dillon hat and wear it whenever I use the press...
                think they come with an embroidered jacket too

                Comment

                • #38
                  Trgt
                  Member
                  CGN Contributor - Lifetime
                  • Jan 2013
                  • 367

                  I have a NEW rockchuker supreme deluxe kit that I'll trade you for your USED Dillon progressive, in case you want something shiny clean :-)

                  Comment

                  Working...
                  UA-8071174-1