Wearing gloves is a good idea but keep in mind that lead contamination comes from ingesting it somehow, like breathing dust in the air as in indoor ranges, or when casting indoors, or if there is lead on your fingers that gets transferred to your food or if you touch your eyes, etc.
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
Reloading process
Collapse
X
-
Oh boy.So Stilly,
would it be the right choice to get these four dies that include the PTX?
As I understand even with these dies I'd still need to get the riser like this one http://www.cabelas.com/product/Lee-A...er%26CQ_st%3Db
Thanks in advance!
You are starting a ford/chevy debate now with the 4 die v. 3 die set. That 4th die is a Factory Crimp Die and not necessarily needed (you can buy it for $16). I think 9 out of 11 people will tell you that that 4th die is NOT needed. You certainly do NOT want it if you are loading lead or maybe even plated or PC pills. SO if you already have a set of RCBS dies enroute, I suggest just buying a Lee PTX die. I have never bought 4 die sets. As much as I love lee and their thriftyness, I only own ONE FCD and that is a 40 cal FCD that I use as a push through resizer. Look at just about everyone else, There has to be a reason why most all other die makers have only 3 dies in their sets. That 4th die is a crutch, once you make decent ammo and have your dies setup, it is not needed...
Now for the riser. Maybe, but I would point to it here: http://www.titanreloading.com/index....ch=lee%20riser Because when it comes to buying ANYTHING Lee, TITAN or FSR are the BEST places to get it. PERIOD. Maybe if you have a black friday sale with a veteran's discount and a black panther discount PLUS they let you use the HArbor freight 44% off coupon on your order, MAYBE then you should buy from a different place, but Titan and FSR are what I suggest.
Do you need that riser? That riser is meant for the LEE Classic and precision turrets. Since you did not buy one of those turrets (the fastest ones you can buy before going to a progressive) you most likely do NOT have the same setup/navigation on your press and therefore you probably do NOT need it. There is also a swivel http://www.titanreloading.com/index....h=lee%20swivel that might be good and you are supposed to use that swivel in conjunction with that riser. That riser AGAIN, is made for the Lee Turrets and the Lee Turrets have a most EXCELLENT way of priming, called the Lee safety prime or something, and if you do NOT have the riser, the powder dropper might hit and scrape your primer holder. The riser allows it to rise and clear that primer container with no issues.
But since you can not put a Lee safety primer or auto prime onto the RCBS turret, then it is not needed.
Another thing nobody has caught on to yet is that Lee tells folks that they designed their powder dropper to work with the 4 and 3 hole turret and the rotational action plus the bumping of the PTX makes the powder settle better for a more consistent charge. Well, on the RCBS turret you will have none of that most likely. You MIGHT have some, but not like they intended, so your powder might drop in variations. No big deal really until it becomes a tiresome and bigger deal. But hey, give it a try, even Dodge Rams are sold with 4 bangers in them...
In all honesty though, that lee powder dropper was designed to work with the Lee 3 hole precision and 4 hole classic turrets as well as the pro-1000 and the Loadmasters. (which contradicts what Lee tells people about the powder needing to be rotated and bumped for consistent action).
Get it, put it on and let's find out. And remember, I am just some guy on the internet.
By the way, I heard the company Dillon died the other day... Now all those guys with the blue presses are out of luck when they break after about 80k rounds...
7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...
Need GOOD SS pins to clean your brass? Try the new and improved model...

And remember- 99.9% of the lawyers ruin it for the other .1%...Comment
-
You know how the firearms safety rules are really just a series of redundancies? Same with this. If you are always meticulous & never distracted then a double charge will never happen. However real life isn't like that. A typical situation is a reloader fills up a case, then gets distracted by a screaming kid or a knock on the door or whatever & loses his place. He comes back 30 minutes or 2 weeks later then fills up the case again, thinking it's empty. Double charge.
The less-dense powders fill up the case such that if a 2nd charge were loaded it would overflow. Don't curse the ensuing mess, rather be thankful that a safety redundancy saved you from your initial error.
But they're not all bad, denser powders are more economical because more rounds can be loaded per pound.---------------------
"There is no "best." If there was, everyone here would own that one, and no other." - DSBComment
-
Thank you all again!
So Lee PTX die it is, i hate wasting money unnecessary, you may disagree because I bought an "expensive" press, but it's all relative, I paid $219 for it and should be getting $75 back from RCBS. I thought that PTX was the one that was extra in that set, tells you how much I know
I will order a separate Lee PTX,
swage gauge, https://ballistictools.com/store/swa...-primer-pocket
a trimming set if need it, I did not see anyone mention it, assuming because it's mostly for the rifle cartridges trimming, that I am planing on reloading eventually as well.
LEE CASE TRIMMER CUTTER & LOCK STUD The Cutter and Lock Stud works for most calibers. Made from hardened steel, trimming cases to correct SAMMI specifications has never been easier. The shaft on the lock stud allows the setup to be turned by hand or with an electric drill. You will need only one. Large […]
or one of the Lee Quick Trim case trimmers
For now, will I need anything other tools or equipment to start reloading my 9mm? Just trying to avoid unnecessary delivery charges.
I am also still a little confused with powder choices. I see the aforementioned CFE Pistol Powder in the Lyman's manual but I don't see my Berry's bullets i.e. .356, 124gr target hp. So how do I choose correct powder charge if I do end up with the CFE and use my bullets? What about adjusting the OAL if I use the same bullets and my (not ordered yet) new brass cases?
Thanks,Last edited by nmikmik; 12-13-2016, 1:03 PM.Comment
-
You might need to lube the inside of the necks with mica or a spray case lubes (of the type that doesn't contaminate powder or primers) if you use the Lee ptx dies. I use a lee powder measure and it actually works better and more reliably than my Hornady on the progressive press. The Lee PTX dies can be sticky. The expander plugs on the dies I have are tight fitting and a bit rough. I ended up taking them apart and polishing the plugs, which helped a lot.Comment
-
I only care about rifle primer pockets and do not really ever bother to decrimp 9mm primer pockets. I use the RCBS on-press swager to swage primer pockets for 223 and I have one of the RCBS crimp cutters that goes in a cordless drill that I use for the odd 9mm crimped case or if I only need to decrimp a couple rifle cases.Thank you all again!
So Lee PTX die it is, i hate wasting money unnecessary, you may disagree because I bought an "expensive" press, but it's all relative, I paid $219 for it and should be getting $75 back from RCBS. I thought that PTX was the one that was extra in that set, tells you how much I know
I will order a separate Lee PTX,
swage gauge, https://ballistictools.com/store/swa...-primer-pocket
I use the RCBS trim-pro or whatever they call it with the three way cutter head for rifle cases only. I never trim pistol cases.a trimming set if need it, I did not see anyone mention it, assuming because it's mostly for the rifle cartridges trimming, that I am planing on reloading eventually as well.
LEE CASE TRIMMER CUTTER & LOCK STUD The Cutter and Lock Stud works for most calibers. Made from hardened steel, trimming cases to correct SAMMI specifications has never been easier. The shaft on the lock stud allows the setup to be turned by hand or with an electric drill. You will need only one. Large […]
or one of the Lee Quick Trim case trimmers
You need a case gauge, I use a "hundo" gauge and I have a Dillon case gauge around here somewhere. You need an impact bullet puller because mistakes happen. I would swap out the Auto disk for an Auto Drum powder measure and a set of extra drum set. If RCBS offers an on-press primer setup for the turret press get that, its a nice thing to have. Add a set of good calipers, a good powder scale, a few plastic trays for cases, and a bin or two for bullets and brass and you have a decent starter kit.
My medium load for the 124gr Berrys over CFE is 4.8gr at 1.15. IIWY I would start around 4.6 and work up to see what your gun likes.I am also still a little confused with powder choices. I see the aforementioned CFE Pistol Powder in the Lyman's manual but I don't see my Berry's bullets i.e. .356, 124gr target hp. So how do I choose correct powder charge if I do end up with the CFE and use my bullets? What about adjusting the OAL if I use the same bullets and my (not ordered yet) new brass cases?
Thanks,Fear is the spare change that will keep you broke
Call him run-like-hell-when-shtf-guy or dial-911-guy but NEVER call an unarmed man "Security".Comment
-
I would look at the lee hand loader loader . You can adjust it to check OAL . Primer seating .
Like suggest - a bullet puller
A few plastic bullet / cartridge holders [ different colors - loaded , primed , need depriming - etc ]
Calipers - I would get Digital one - easier to read .
At least one other reloading manual , index tabs to mark what is important to you [ hi lite ]
A couple of lights . I use 2 lamps plus an overhead 4 foot flore.
A kitchen timer - set it for 15 , 20 - whatever minutes and get up and move if only to pee . Seating for a while and your legs can go to sleep .
I keep a towel on my shoulder - unless you know when you are going to sneeze or scratch yourself .
Has anyone mentioned goggles yet ?life member - CRPA and NRA
All ways listen - after you can say I new thatComment
-
You might try:Thank you all again!
So Lee PTX die it is, i hate wasting money unnecessary, you may disagree because I bought an "expensive" press, but it's all relative, I paid $219 for it and should be getting $75 back from RCBS. I thought that PTX was the one that was extra in that set, tells you how much I know
I will order a separate Lee PTX,
swage gauge, https://ballistictools.com/store/swa...-primer-pocket
a trimming set if need it, I did not see anyone mention it, assuming because it's mostly for the rifle cartridges trimming, that I am planing on reloading eventually as well.
LEE CASE TRIMMER CUTTER & LOCK STUD The Cutter and Lock Stud works for most calibers. Made from hardened steel, trimming cases to correct SAMMI specifications has never been easier. The shaft on the lock stud allows the setup to be turned by hand or with an electric drill. You will need only one. Large […]
or one of the Lee Quick Trim case trimmers
For now, will I need anything other tools or equipment to start reloading my 9mm? Just trying to avoid unnecessary delivery charges.
I am also still a little confused with powder choices. I see the aforementioned CFE Pistol Powder in the Lyman's manual but I don't see my Berry's bullets i.e. .356, 124gr target hp. So how do I choose correct powder charge if I do end up with the CFE and use my bullets? What about adjusting the OAL if I use the same bullets and my (not ordered yet) new brass cases?
Thanks,
As for go/no go, bah. If you got military brass that is one thing, but even then- bah. I would just use a primer pocket swager.
Bullets are bullets. You are only looking at it from one angle. Another angle that you might look at it is a Plated 9mm 124gr, OR better yet, a LEAD 9mm 124gr Lyman has images in their book, match them up, OR just go by other weights.
If I wanted a starting charge for a ladder I would end up selecting 125gr LEAD in the new BoLee and that would give me a 4.4gr to start with and a 1.125 MIN OAL. In all honesty I would make about 5 at 4.5, 5 at 4.6 and 5 at 4.7.
Typically, plated = lead, so plated bullets = lead bullets.
At one point I never really cared all that much so for me plated=lead=j-word. That worked out well, but When possible I do try to be a bit more careful.
Worst case scenario, look for a powder that is more widely used/tested and buy another powder.
CFE pistol is good stuff, but so is 700-X, WSF, WST, Power Pistol, HS-6, BE, AA#5,7,9, PB, ZIP, and more...
Please do not buy a 9mm brass trimmer though... Trimming (common caliber straight-walled) pistol brass is like mowing astroturf...
Die setups- Most all of Lee come with 1 resizer/decapper, 1 ptx/charging, 1 seater/crimper the 4 die sets include a FCD or Factory Crimp Die (carbide in the carbide sets usually IIRC)
Other companies seem to include the following dies: 1 resizer/decapper, 1 expander, 1 seater/crimper, I have also seen I think a seater and a crimper seperately in a Dillon set with no expander, but I would have to doublecheck.
To have an even better setup though, you could have gone with a RCBS QC powder dropper + case activated linkage + powder funnel ptx bushing for about $200 or less prolly. But that would be a far superior dropper, with a baffle, and a HUGE adjustable charge weight range. AND no PTX die needed since it would be in the bushing that sits in the dropper AND the ptx takes care of .25-.50 caliber. (not .22 like I had through of before). But this is also for a more advanced reloader that is looking to make improvements.Last edited by stilly; 12-14-2016, 1:12 PM.7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...
Need GOOD SS pins to clean your brass? Try the new and improved model...

And remember- 99.9% of the lawyers ruin it for the other .1%...Comment
-
Thank you again!
I ordered the Lee PTX and did no go for the trimmer, although I suspect I will need it later for the rifle calibers.
For now I will be happy to be able to reload the 9mm. Still holding off for the primers and powder because of the hazmat fee and pretty much a need to buy more.Comment
-
Throw you a bone so you can get some practice in. For $6.80 i'll fill up a small flat rate box with (mostly) once fired 9mm brass. Probably be around 400 pieces. All range pickups. I have more than i need. PM me if you need that kind of help.United Sportsmen Range Safety Officer
(Volunteer)Comment
-
Philc has a nice option for you if you need brass...Thank you again!
I ordered the Lee PTX and did no go for the trimmer, although I suspect I will need it later for the rifle calibers.
For now I will be happy to be able to reload the 9mm. Still holding off for the primers and powder because of the hazmat fee and pretty much a need to buy more.
Seems like things might be coming along for you.
I do not know how large your bankroll is but my suggestion is that you get a Cabelas's Club Visa with a 900+ limit on it and when they have their primers go on sale, buy about 30k of LP/SP/SR/LR and you will be in REAL good shape if the average is around $24 or less per 1k.
Forget buying powder from them. Stick with other places, but really, powder is easy to offset shipping/hazmat, just buy a few 8lb bottles and you are good.
Look for WSF/HS6/Win231/HP38/Autocomp/ZIP/CLAYS/PB or CFE pistol. I tell you though, CFE pistol impressed me. That is some seriously good stuff. Meters nice and really has a bit more pop in your loads.
If I had to only pick one of those, I would pick CFE Pistol, If I had to get two, I would get CFEP and HP-38/Win231 but they are all pretty good. I think we use a 5.0-5.2gr charge of WSF (Winchester Super Field) in the 9mm for practice on a 115gr plated pill. Good stuff no complaints. It works well in the glock, rami, sig and khar.
Just look for someone who is selling powder by the 8lb jug at Wideners, Powdervalleyinc or 3rdgeneration, or even midsouth shooter, if they let you buy multiple 8lb jugs, GO FOR IT. All you need to buy is about 2-4 8LB jugs and your hazmat/shipping is pretty much offset. If you can also add primers into that order for around $25-27 per 1k then you are still doing good. Then when Cabelas has them on sale for 19.99/1k or 16.99/1k buy another 30k+ primers... It is all good. That will keep you shooting for a few years and allow you to rollover to other calibers.
Doing the math, at $160/8lb bottle (that is HIGH) and $33/1k Primers, that means that if you bought 1 8lb bottle, that would give you the following:
$160/8lb= $20/1lb & 1lb = 7000gr =1400 shots @5.0gr SO in an 8lb bottle you will have about 11200 shots of 9mm
Make life easy and round off 11k shots per 8lb bottle. = $160 for 11k shots = .0145 each
11k primers =33 x 11 = $333 for 11k shots = .0302 each
BRass CAN be free, but expect to pay .01-.04 each or go find range pickups or hell, go to gunbroker.com and buy once fired brass if you want to jumpstart. Hell, even I or others could assist you in that. LET'S supposed you buy 9mm at .03 each (expensive, cause that is the price of .40) that means if you bought 11k brass you would pay $330, but why? You can prolly get 500-1000 yup- for around $30 (http://www.gunbroker.com/All/BI.aspx...9mm+once+fired)
So just reload them after they are fired... Maybe get 2500 or 5k pieces if you really want to. But supposed you bought brass @ $30/1000 that means your shells cost .03 each.
Then you got bullets. Cast your own? Maybe. Or buy plated to start out. Buy plated at 124gr or 115gr = Xtreme is around $40/500 so $80/1000 or .08 each
Add it all up
.0145 + .0302 + .03 + .08 = $.1547 per shot ($7.73/box of 50) for your FIRST loadings. Then you pick up your brass and reuse it and your NEXT reloadings are $.1247 each ($6.24 per box of 50).
So it will cost you just a hair over $1371 for 11k 9mm rounds that you can shoot.
AND I was talking about EXPENSIVE components. Powder will most likely be about $20 less per 8lb bottle and primers will be around $25 or less per 1k hopefully... Federal primers are posted in another link costing $28.xx/1k which would drop the above numbers down by about a cent a shot. It is all about buying in bulk to really save money reloading.
Go buy lead and learn to cast and PC and you can make some super slick pills that cost about .04 each instead of the .08 that plated cost, AND you can shoot them faster too.
Yawn...
/thread.Last edited by stilly; 12-16-2016, 12:46 AM.7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...
Need GOOD SS pins to clean your brass? Try the new and improved model...

And remember- 99.9% of the lawyers ruin it for the other .1%...Comment
-
Are you ever at the range and you see those other shooters next to you with brand new ammo. Well, once those cases come out of the guns they now become once fired.
Now, if you aren't sure whether they could be reloads ask them. I've picked up thousands of brass on the ground even ones that have been left there to look like crap and reloaded them. I am not telling you to go against what the manual tells you because it's a precaution to better know the brass but once youvery become skilled at the inspection process you can start picking up brass thus reloading them.Comment
-
United Sportsmen Range Safety Officer
(Volunteer)Comment
-
Primum Non Nocere
Good Medicine, Bad Places.
Do No Harm, Do Know Harm.
"SA MC Operator. Cuz, you gotta Operate when you're cruzin' the couch with the vodka!"--XDJYoComment
-
I / we shoot mainly at an indoor range - cement floor .
Mainly the 50 AE and 44 mag- I have to watch - when they hit floor , the base can get bent . I pick them up anyway . I have found from the 25 ACP to the 40 with bent bases .
Another thing to look for is dented cases . Dented cases are a good reason to get a Lee hand loader or if you have a spare die in that caliber - do the drop in test . If it drops in - not bent to bad and you can reload .
If it kind of sticks - not worth my time . [ while brass will not scratch you steel dye - it can scratch bluing in die - or get stuck . ]life member - CRPA and NRA
All ways listen - after you can say I new thatComment
Calguns.net Statistics
Collapse
Topics: 1,870,699
Posts: 25,175,053
Members: 358,862
Active Members: 5,389
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 26965 users online. 145 members and 26820 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment