Unconfigured Ad Widget

Collapse

Reloading 45 acp problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #31
    orangeusa
    • Jul 2009
    • 9055

    Originally posted by rlewpolar
    Solved it! The lockring that holds the die to the press is missing a rubber O ring. The die was shifting slightly in the press and causing the bullet to go in slightly at an angle. Used the lockring from my 9mm die and it worked perfectly. That would explain the scraping. Thanks to all for trying to troubleshoot this.


    Sent from my iPhone using Tapatalk
    Nicely done. You will get about 10 posts after this trying to solve your problem, because nobody reads the entire thread. LOLZ!

    Comment

    • #32
      pacrat
      I need a LIFE!!
      • May 2014
      • 10287

      Originally posted by orangeusa
      Nicely done. You will get about 10 posts after this trying to solve your problem, because nobody reads the entire thread. LOLZ!

      +1 on that


      OP...............Choot em man, Choot em.

      Comment

      • #33
        stilly
        I need a LIFE!!
        • Jul 2009
        • 10685

        Yep, for sure...

        Hey if you want better lock rings Brian at ReloadOC has a 6 pack of the nice ones from Hornady for around $20. Saves shipping for sure...


        It is also cheaper than all of the asshats selling them on Fleabay plus you get to support a local reloading shop...

        just sayin...
        7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...

        Need GOOD SS pins to clean your brass? Try the new and improved model...



        And remember- 99.9% of the lawyers ruin it for the other .1%...

        Comment

        • #34
          1bulletBarney
          CGN/CGSSA Contributor
          CGN Contributor
          • Oct 2013
          • 1916

          Originally posted by stephewc

          I found a random pic on the web of the bell/flare I'm talking about. The one on the far right is a little too much I think, but I try to just get enough bell/flare before it starts to scrape.


          The one on the far right is flared way to much...

          Good job figureing out what was going on with the missing O ring on the lock nut...
          NRA Member
          NRA-ILA Contributor
          CGN Contributor

          iTrader Feedback
          1bulletBarney iTrader Feedback - Calguns.net?

          Comment

          • #35
            JagerDog
            I need a LIFE!!
            • May 2011
            • 15870

            I know you said you fixed this but............your pic prior to crimp shows very limited bell if any. IMHO you could be more generous with the belling.
            Palestine is a fake country

            No Mas Hamas



            #Blackolivesmatter

            Comment

            • #36
              Metal God
              Senior Member
              • Apr 2013
              • 1839

              I would just check the 200 bullets already loaded for copper flakes and clean them off...
              ^^^^^^^^^^^^^^^^^^^^That^^^^^^^^^^^^^^^^^^^^^

              I see no problem shooting them as others said , as long as you're not looking for real good accuracy from them . Just check for build up around the case mouth and clean it off . I was getting some plunk test failures dew to lead build up on the case mouth before flaring a little more .
              Last edited by Metal God; 10-18-2015, 8:40 AM.
              Tolerate
              allow the existence, occurrence, or practice of (something that one does not necessarily like or agree with) without interference.

              Anyone else find it sad that those who preach tolerance CAN'T allow the existence, occurrence, or practice of (something that they do not necessarily like or agree with) without interference.

              I write almost everything in a jovial manner regardless of content . If that's not how you took it please try again

              Comment

              • #37
                Divehobo
                Senior Member
                • Apr 2010
                • 1271

                single stage press, passes drop test.....shoot em'
                NRA Pistol, Rifle, CCW and Metallic Reloading instructor

                Comment

                • #38
                  Bobshouse
                  Senior Member
                  • Oct 2005
                  • 516

                  Don't use them if you're shooting a competition or something, because you will lose accuracy. But for general plinking, don't worry about it. You will have a little more leading, but we know you keep your guns cleaned like your supposed to.

                  It is a big headache to pull that many rounds. Then of course when you reload them you will have crimping problems because the bullets will probably retain the crimp "ring" from the first loading.

                  As far as belling, I'd go with the middle round in the pic, the one on the right will definitely cause problems such as split brass. It would probably have a hard time getting into the crimp or seating die...lol

                  Comment

                  • #39
                    JMP
                    Internet Warrior
                    CGN Contributor - Lifetime
                    • Feb 2012
                    • 17056

                    Originally posted by orangeusa
                    Get some calipers (Harbor Freight has them for like $12 I think).
                    Huh? I learned on this forum that one must use Mitutoyo as a minimum. Anyways, you need to bell the case more more.

                    However, if you are doing it on a single stage press, one way to cheat a bit is to chamfer the inside of the case mouth at 45 degrees. That lets the bullet slide in better.

                    Comment

                    • #40
                      NoHeavyHitter
                      Banned
                      • Jul 2011
                      • 2876

                      A couple decades ago, I made the mistake of trying copper-plated cast bullets in .45acp. Never again. Now I watch for sales on bulk FMJ bullets and get them just as cheap and have never had any further problems.

                      That's not saying that cast can't be made to shoot just fine in auto-pistol calibers. But my buying methods simply make it not worth the bother. Now I only shoot cast bullets out of rimmed revolver calibers and do just fine. YMMV...

                      Comment

                      • #41
                        stilly
                        I need a LIFE!!
                        • Jul 2009
                        • 10685

                        Originally posted by NoHeavyHitter
                        A couple decades ago, I made the mistake of trying copper-plated cast bullets in .45acp. Never again. Now I watch for sales on bulk FMJ bullets and get them just as cheap and have never had any further problems.

                        That's not saying that cast can't be made to shoot just fine in auto-pistol calibers. But my buying methods simply make it not worth the bother. Now I only shoot cast bullets out of rimmed revolver calibers and do just fine. YMMV...
                        You should try some PC then... MUCH better pills than plated.
                        7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...

                        Need GOOD SS pins to clean your brass? Try the new and improved model...



                        And remember- 99.9% of the lawyers ruin it for the other .1%...

                        Comment

                        • #42
                          opos
                          In Memoriam
                          • Oct 2009
                          • 1597

                          Originally posted by stilly
                          You should try some PC then... MUCH better pills than plated.

                          I've been shooting Missouri #4 powder coated 200 grain cast lead bullets in a late model CZ 97 with W231...mid range loads....CZ's can be a little picky at times but this is a real "cadillac load"...accurate, gentle recoil and runs the pistol just fine with standard springs, etc...no leading no hassles....just my 2 cents.
                          God and the Constitution give me my rights and actions...any other input is just blabbering.

                          Comment

                          Working...
                          UA-8071174-1