Recommend me a fixed stock for featureless please

[Bainter1212]

Incorrect. California Department of Justice Bureau of Firearms attests that the Exile Machine Hammerhead is not a pistol grip and therefore legal when used on a detachable magazine semiautomatic centerfire rifle with none of the features listed in CA PC 30515(a)(1)(A-F) (Sworn testimony of Frank Navarro, CA DOJ Bureau of Firearms Special Agent, in the case of People vs. Haack and Haack, California County of Tulare Superior Court, 3 November 2010.) Only two featureless CA AWB compliance products can make that claim.

Thanks for that. I already have your Hammerhead grips on three of my ARs so......I am clearly already a fan. Didn't know about the DOJ thing.

[Echidin]

Pin your existing stock as stated above or use a magpul fixed carbine stock. It will work right on top of your carbine buffer tube

I went with the Magpul fixed carbine stock. Seemed like one of the cheaper options for going featureless.

[KrisDSA]

Monsterman Grip come in the mail today.

This was one of there Second Hand Grips. Under $34.00 Shipped

. Mine didn't need any work to get it on. ****ing hate it but have to do what I have to do.

[CouchOperator]

A2.

[Oceanbob]

Incorrect. California Department of Justice Bureau of Firearms attests that the Exile Machine Hammerhead is not a pistol grip and therefore legal when used on a detachable magazine semiautomatic centerfire rifle with none of the features listed in CA PC 30515(a)(1)(A-F) (Sworn testimony of Frank Navarro, CA DOJ Bureau of Firearms Special Agent, in the case of People vs. Haack and Haack, California County of Tulare Superior Court, 3 November 2010.) Only two featureless CA AWB compliance products can make that claim.

Thanks so much...!

[TMB 1]

Monsterman Grip come in the mail today.

This was one of there Second Hand Grips. Under $34.00 Shipped

. Mine didn't need any work to get it on. ****ing hate it but have to do what I have to do.

I got a couple MMG 2nds also today. They were too tight, had to boil some water and put the end that bolts on in it for a little bit, then they went right on. I like them.

[Jimi Jah]

I'm thinking of tapping in a screw into the buffer tube. The first notch exposed will block the movement of the stock. The screw will hold tight into the metal tube, no plastic is drilled.

I expect to see the self tapping screws as another option for those wanting to keep their existing stocks.

[2meterB]

I got a couple MMG 2nds also today. They were too tight, had to boil some water and put the end that bolts on in it for a little bit, then they went right on. I like them.

I used windex and elbow grease. Nice grip. Wish it had storage though.

[ATVMXR]

What is the other featureless CA DOJ approved product?

Incorrect. California Department of Justice Bureau of Firearms attests that the Exile Machine Hammerhead is not a pistol grip and therefore legal when used on a detachable magazine semiautomatic centerfire rifle with none of the features listed in CA PC 30515(a)(1)(A-F) (Sworn testimony of Frank Navarro, CA DOJ Bureau of Firearms Special Agent, in the case of People vs. Haack and Haack, California County of Tulare Superior Court, 3 November 2010.) Only two featureless CA AWB compliance products can make that claim.

[Bangzoom]

This is my fix for the grip and stock all in one....molded ABS pinned to the stock and I will put a lil black paint on the screw

[zan101]

Thanks so much...!

What stock is that? and where can it be purchased?

[Oceanbob]

What stock is that? and where can it be purchased?

It's an ACE stock and I bought several from MidwayUSA

You have to buy the Tube separately.

The stock:

http://www.midwayusa.com/product/760499/ace-skeleton-stock-99-overall-length-ar-15-lr-308-aluminum-black

The tube:

http://www.midwayusa.com/product/489724/dpms-receiver-extension-buffer-tube-ar-15-a1-a2-stock

And, you have to buy the spring and buffer as well.

Personally I don't use the foam sleeve. This is a strong, light weight set up.








Be well
Bob

[zan101]

Thanks Oceanbob, will look into that as one of my options for featureless


Will the buffer and spring that came with my BCM mid length rifle work, or do I have to purchase a different spring and buffer? Thanks in advanced

[mike.h]

This is my fix for the grip and stock all in one....molded ABS pinned to the stock and I will put a lil black paint on the screw

I like it... kinda, well...ok, more then any thing else I've seen.

[Oceanbob]

This is my fix for the grip and stock all in one....molded ABS pinned to the stock and I will put a lil black paint on the screw
]

Good enough to get you thru the "CheckPoint"......

Simple and efficient.

Be well
Bob