Recommend me a fixed stock for featureless please

[Dano3467]

Hi guys, with new situation were facing, I'm in need of recommendation's for

Items:
1. stock for making featureless AR's (Would be nice if stock would allow me to retain stock B-tube)
2. Grip, hopefully not to change grip too much but still usable. (the need to comply w/out reg as AW)

1st up SW MP
2nd up colt 901

Looking for a cheap way out as I'll be moving & will lose these later.

Thanks guys !

[2meterB]

I went with monsterman grips and magpul fcs. I'll post pics when everything arrives.

[Bainter1212]

The easiest and cheapest one I did was to drill a small hole through the M4 style adjustable stock latch and put a small screw there. It kept the latch from being useable which meant I couldn't adjust the stock.
Literally 10 seconds to remove.

The Hammerhead grip is great, they run $30 retail but go on sale periodically for $10.

You can find any number of muzzle brakes or linear compensators for $40 apiece.

All of this stuff is easy as pie to undo.

[Dano3467]

Thanks for the tip Bainter, I do like the screw idea, and would seem to cure the issue of fixed stock, will check the hammer a little closer, & probably go that route.

Again, Thank you for posting this suggestion.

Have a great day !

[North86]

The easiest and cheapest one I did was to drill a small hole through the M4 style adjustable stock latch and put a small screw there. It kept the latch from being useable which meant I couldn't adjust the stock.

Can you post a picture of where you drilled?

[Sharp Shooter]

This is the one I'll probably get if I decide to go featureless. Thordsen FRS-15

http://www.thordsencustoms.com/rifle-pics/?___store=default

I have a buddy who has shot one and says it's very comfortable.

[ChuckDizzle]

I've been very happy with my Ace skeleton stock.

[Maht_g]

I want to try this one, if anyone knows what it is...

[joeypounds]

Ace fixed stock and a solar tactical grip wrap, several breaks or comps out there to be compliant


Sent from my iPhone using Tapatalk

[spdrcr]

I want to try this one, if anyone knows what it is...

That's the U15 Rifle Stock made by a Calguns member.


.

[KrisDSA]

Well if you have a magpul buttstock, remove butt pad install a a cut down piece of pcv and restall butt pad. Paint it black and call it a day. Now it can't be I just adjusted

[erik_26]

I really like my Thordsen Customs FRS-15 stock.

I am running that on several of my featureless rifles and love them.

http://www.thordsencustoms.com/

[JeffSD]

I like the look of the FRS-15. I have a Daniel Defense mid-length rifle. I noticed on the Thordsen web site it says the FRS-15 is not compatible with the rifle-length, but it doesn't say if it's good to go on a mid-length. Anyone know?

[Dano3467]

Some good ideas here, thanks

[Barang]

Well if you have a magpul buttstock, remove butt pad install a a cut down piece of pcv and restall butt pad. Paint it black and call it a day. Now it can't be I just adjusted

Hey! that's neato. I like it!