MasterPieceArms

[hefedehefe]

I just bought an MPA930 and love it. I bought both uppers and this gun never jams. The original upper that came with it was a side cocker with a muzzle break welded on. This piece seems to work fine except that sparks fly and burn my hand. My top cocker has been customized to be short like the threaded barrell but without the threads and work perfect. Anybody else have this problem? Other than that I am completely stocked with my gun. It is really acurate too

[voiceoftheright]

I had that problem but with my top cocker and I got some frag in my finger, not really sure how that happened and it was only once. Check out USMachinegun.com for accessories if you haven't already. I got the mag release extension and the front strap (kinda nice but mainly for traditional looks). Also put a rear sling swivel on it and have an underarm sling harness for it. Have fun bump firing that bad boy!

[den888]

Very nice !

[hefedehefe]

I had that problem but with my top cocker and I got some frag in my finger, not really sure how that happened and it was only once. Check out USMachinegun.com for accessories if you haven't already. I got the mag release extension and the front strap (kinda nice but mainly for traditional looks). Also put a rear sling swivel on it and have an underarm sling harness for it. Have fun bump firing that bad boy!

Thats what happend to me. I got a frag in my left knucle. Was bleeding a bit. I think it's that muzzle break, because I ordered a top cocker with out it straight from them and they machined it without being threaded and it works perfect. See below. I think I'm going to send the side cocker in for same adjustments

[voiceoftheright]

Ya, it only happened the first time I shot it, it very well could have been some burrs in that break. It has been great since then. Anyone else who has one of these post a pic, this thread is looking good so far. Fun guns! If you don't have one, you should think about getting one.

[JagerTroop]

I have one and loooooove it. It is hands down the cheapest gun I own, but I shoot it 5x more than any other. The only problem... its really expensive.lol. probably because I only bump fire it. I've got around 4k rounds through it, and the only problems I've had are; I launched the hammer pin E-clip (replaced it with a snap ring), and the buffer is beat to sh*t. Also, don't bother with hollowpoints or truncated rounds. It hates them.



Hey Voice... you might want to rethink that front strap. Either the DOJ or ATF (can't remember which) ruled that it was a forward grip. Check your local laws. Be safe

[voiceoftheright]

I have one and loooooove it. It is hands down the cheapest gun I own, but I shoot it 5x more than any other. The only problem... its really expensive.lol. probably because I only bump fire it. I've got around 4k rounds through it, and the only problems I've had are; I launched the hammer pin E-clip (replaced it with a snap ring), and the buffer is beat to sh*t. Also, don't bother with hollowpoints or truncated rounds. It hates them.

I'll post a pic later.

Hey Voice... you might want to rethink that front strap. Either the DOJ or ATF (can't remember which) ruled that it was a forward grip. Check your local laws. Be safe

I will look into it closer but I was told it's considered a "hanging strap" and not a forward grip. If anyone knows for a fact, not just speculation because I thought it was as well initially, then please let me know via PM. USMachinegun sold it to me and they have everything that is NFA marked accordingly and I even emailed them about it and they said it was a non NFA part.

[JagerTroop]

Well, thank God that pic was taken outside of CA, because you know damn well the DOJ will call it a forward vert grip. ATF still (to the best of my recent research) hasn't written an opinion letter on it, so federally, it's still up in the air. That doesn't mean that there ISN'T a ruling, but only that I can't find one (for or against).

Maybe the right people will see this thread and chime in. In my experience (because I've been told) you're going to get a big "thumbs down".

I'm not trying to rain on your parade. Just trying to help keep my fellow CGers safe

[zman]

Mine's been 100% since day one. It's definitely a fun gun and a range looker too



I added the reflex sight and this rubber grip material.

[hefedehefe]

I want to add the .45 to my collection one day. The thing is massive

[zman]

I want to add the .45 to my collection one day. The thing is massive

LOL. Yes it is! Colby (CGM Firearms) showed me one and needless to say, it was too massive for my tastes too.

[voiceoftheright]

Well, thank God that pic was taken outside of CA, because you know damn well the DOJ will call it a forward vert grip. ATF still (to the best of my recent research) hasn't written an opinion letter on it, so federally, it's still up in the air. That doesn't mean that there ISN'T a ruling, but only that I can't find one (for or against).

Maybe the right people will see this thread and chime in. In my experience (because I've been told) you're going to get a big "thumbs down".

I'm not trying to rain on your parade. Just trying to help keep my fellow CGers safe

Ya, that's all the info on the straps I could find as well. I have left the strap off whenever I am in CA anyways just to avoid headache, it just snaps off so not a big deal anyways. Thanks though for lloking out!

[hefedehefe]

I saw some one had the extended barrell on theirs. I wish I could put one on mine, but I dare not risk it and loose everything

[JagerTroop]

Extended barrel? You mean the 10" barrel w/ the AR handguard? Totally legal to have the handguard, as long as it has a maglock (just like an AR pistol).

[hefedehefe]

Extended barrel? You mean the 10" barrel w/ the AR handguard? Totally legal to have the handguard, as long as it has a maglock (just like an AR pistol).

I was refering to the pistol standard safety extension. It's 5 inches. I never seen a maglock for mac style pistols. I'll have to look it up