Depends on where you'll use your Glock. It'll keep crap out of the fire mechanism should it fall into mud etc. For the price it's cheap insurance, so it's better to have one than not IMHO. If your going to get one I'd recommend the Vickers/Tango Down with the built in Glock tool for $12.30
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
Glock Frame Insert
Collapse
X
-
Can DI AR's run dirty?
Palmetto State Armory Suppliers revealed
"If it ain't stock, it don't belong on your Glock" -
they prevent debris from falling out
save your $6 and the laughter by other shooters...Rule 1- ALL GUNS ARE ALWAYS LOADED
Rule 2 -NEVER LET THE MUZZLE COVER ANYTHING YOU ARE NOT PREPARED TO DESTROY (including your hands and legs)
Rule 3 -KEEP YOUR FINGER OFF THE TRIGGER UNTIL YOUR SIGHTS ARE ON THE TARGET
Rule 4 -BE SURE OF YOUR TARGET AND WHAT IS BEYOND IT
(thanks to Jeff Cooper)Comment
-
Answer to a non existent problem.Comment
-
+1Originally posted by HopetonBrownI think they're necessary.
They keep the rim of your top round on your reloaded magazine from catching on the bottom edge of your mag well if you do a wonky reload.
Not all of them are angled, so the Glockmeister ones are best.
I shoot USPSA Production Division where you basically reload anytime your feet are moving... so a lot. I've botched a reload in a match just like HopetonBrown described. After that I bought the plug and it hasn't happened in the approximately 10,000+ reloads I've done in dryfire alone since then.
As mentioned. Not all plugs are the same. If you have a Gen4 the Pearce option that works with backstraps has the ramp and is still USPSA Production class legal.
(Link for the lazy)
Anyone who says they're just aesthetic or a waste of money either bought the wrong one or never reloads under pressure.Last edited by TheYellowDart; 03-15-2016, 12:24 AM.Comment
-
Bought one.
Lost it.
Didn't bother to replace it.- Rich

Originally posted by dantoddA just government will not be overthrown by force or violence because the people have no incentive to overthrow a just government. If a small minority of people attempt such an insurrection to grab power and enslave the people, the RKBA of the whole is our insurance against their success.Comment
-
LOL..
always thought myself that those are the most useless piece of gear ever created for firearms.
I briefly watched that video above.. it had me at grab some sand off the ground, dribble it down in there... OK.. that's considered a + for buying a plug? for the days you grab sand and dribble it inside your gun.
someone needs to invent something to prevent your gun from being destroyed when you place it in a 500 degree oven. quick!!!
i have another idea, how about instead of a plug, shove 100 meters of fishing line in there in case you decide to throw your gun off the pier, enables you to recover it. thats a double plus fixing that problemLast edited by ducitis; 03-15-2016, 3:03 AM.Comment
-
It's been a pretty revealing thread. Anybody with a Glock who's ever competed or taken a single tactical class is like "yeah you have to have one of these" and everybody else is like "duh I don't get it".Comment
-
-
Good thing I don't care what you think. BTW, the only way to see them is if someone shows it to you. Unless you are one of those guys who look over at the next stall to see what's going on...
Comment
-
10mm NutComment
-
Not my experience... I switch between a G34 w/ plug and G17 w/o plug for uspsa production. I have not experienced problems w/ reloads under stress with my G17. YMMV... If you believe a plug gives you an advantage, it's within the rules, so by all means, install one.
Comment
-
If you like the way your stock pistol balances during firing. Now you want to replace that stock recoil spring assembly with a solid steel guide rod. You can rebalance by installing a steel or brass plug/insert.
I don't operate so I don't shoot my guns after I pluck them out of a mud puddle. Out of all these years putting a gun in my pocket when answering that unexpected knock. I have found lint inside my guns. Maybe a plug would've prevented that.The wise man said just find your place
In the eye of the storm
Seek the roses along the way
Just beware of the thorns... K. MeineComment
-
In my last Glock armorer cert class (3 years ago), Glock re-emphasized that that area allows oil/debris from the trigger mechanism housing/connector to clear and to assist with magazine stripping for double feed malfunction clearances.
So on a competition gun where you don't really care if you have a double feed and have extended floor plates that allow a positive purchase on the stripping the magazine, run one.
I do not use one for my defensive Glocks on the off chance I have a double-feed or possibly end up shooting from an unorthodox position where I need to strip that magazine for reloading."Bruen, the Bruen opinion, I believe, discarded the intermediate scrutiny test that I also thought was not very useful; and has, instead, replaced it with a text history and tradition test." Judge Benitez 12-12-2022
NRA Endowment Life Member, CRPA Life Member
GLOCK (Gen 1-5, G42/43), Colt AR15/M16/M4, Sig P320, Sig P365, Beretta 90 series, Remington 870, HK UMP Factory Armorer
Remington Nylon, 1911, HK, Ruger, Hudson H9 Armorer, just for fun!
I instruct it if you shoot it.Comment
-
So all the other guns in the world, without a channel, shouldn't work so well?In my last Glock armorer cert class (3 years ago), Glock re-emphasized that that area allows oil/debris from the trigger mechanism housing/connector to clear and to assist with magazine stripping for double feed malfunction clearances.
So on a competition gun where you don't really care if you have a double feed and have extended floor plates that allow a positive purchase on the stripping the magazine, run one.
I do not use one for my defensive Glocks on the off chance I have a double-feed or possibly end up shooting from an unorthodox position where I need to strip that magazine for reloading.
I'll take my 10-8 baseplates and plug.Comment
Calguns.net Statistics
Collapse
Topics: 1,870,845
Posts: 25,176,582
Members: 358,862
Active Members: 5,398
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 27540 users online. 43 members and 27497 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment