Unconfigured Ad Widget

Collapse

Reloading for a desert Eagle - Bullet Selection, Loading, Mags, SHENANIGANS!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    Beelzy
    Calguns Addict
    • Apr 2008
    • 9225

    Just make sure whatever load you wind up with doesn't leave too much unburned powder.
    I switched from h110 to 2400 simply because the unburned spherical grains of H110
    would gum up the chamber and rounds would start sticking when feeding.
    "I kill things for a living, don't make yourself one of them"

    Comment

    • #17
      FTC
      Member
      • Jun 2008
      • 329

      I've had to disassemble the mag and cut a couple coils off the spring in the follower for the slide stop after oiling it didn't work, helped with the sticky loading you described.

      Also I avoid 4227 for the same reason described above, too much unburnt powder causing jams and actually peppering my face. More so with the 50 than the 44.
      ------------
      luck is a meeting of preparation and opportunity

      Comment

      • #18
        pigpen66m
        CGN/CGSSA Contributor
        • Jan 2013
        • 1032

        What does it cost to reload .50AE I get factory loads for $1.25 when I can get free shipping.

        Comment

        • #19
          stilly
          I need a LIFE!!
          • Jul 2009
          • 10685

          Originally posted by thegreatcow
          Ok i'll give that a shot. And they are the factory desert eagle mags. So far I disassembled the first one and it definitely seemed to run a bit rough so I made sure to wipe the inside out and placed a small film of CLP on the side and on the spring.

          As for the oal, I'll definitely see if I can load them shorter. That's good to know. I wish reloading manuals made mention of that None of them make any distinction between loading between a revolver and semiauto load. All I've been able to find out is to generally load hotter than normal because that's what the DE likes.

          Gragh so frustrating.

          Edit - And I do also appreciate the advice Stilly, thank you very much for the tips.
          Aye! You are welcome. That is one thing I hate about the reloading manuals. They were written by a bunch of old farts who think real guns have big wheels in the middle and THAT is how the west was won... Oh yeah, and the other mentality- If it has a ROLL crimp, then it is a REVOLVER round- PERIOD...They do not care what gun you have but I BELIEVE they ALL assume that you are loading for a revolver. SO, do NOT go over 240gr bullets in fact, the SWEET spot is 200-240. Those 265 or 300gr bullets aint gonna fit unless you really squish them down, but I aint never bothered to care enough to try them out. The books will USUALLY tell you the shortest possible length, but yeah I dunno, I find that my shortest possible length can go shorter or what not however, I think I took my leed from another Deagler. Also, Bubba Pug is a great authority too on this beast and the powders you can use. I am surprise he aint chimed in yet.

          Let us know how it shoots with your new rounds...


          Originally posted by Beelzy
          Just make sure whatever load you wind up with doesn't leave too much unburned powder.
          I switched from h110 to 2400 simply because the unburned spherical grains of H110
          would gum up the chamber and rounds would start sticking when feeding.
          +1. There is an AWFUL lot of truth in that above post...

          Now I am gonna have to try out a bottle of 2400 to see how good it is once and for all...

          And here I never minded the speckles on my arm and face... But yeah, 100+ rounds with flakes sticking all over and rounds WILL start to fail to feed all the way.

          Originally posted by FTC
          I've had to disassemble the mag and cut a couple coils off the spring in the follower for the slide stop after oiling it didn't work, helped with the sticky loading you described.

          Also I avoid 4227 for the same reason described above, too much unburnt powder causing jams and actually peppering my face. More so with the 50 than the 44.
          I aint gonna tell you HOW to behave with your Deagle because I am certainly no expert, BUT, Brotha lemme tells you a thing or two about mag springs...

          I just got my Deagle back from being RECUT a SECOND time. The FIRST time the slide stop ground down the slide catch notch in the slide I sent it in and asked why it happened. They told me that a factory spring was missing and a third party spring was installed for the slide lock and that caused it.

          So about 400 rounds later I am sending it in AGAIN for the SAME thing. This time they tell me that the problem could be the mags and that my springs might be too worn and not strong enough to push that slide stop up full bore so the corner of it is catching and grinding the notch down; so they sent me BRAND NEW mag springs. The NEW mag springs were about 2" longer then the springs in the factory mags. THAT is all I can say about mags. I guess we will see what happens. I shot it at Insight the other night for the calguns thingy and it seemed to behave itself. Heck, I let FP shoot it and I dunno if he shot it before, but he did none of the famous noob mistakes while holding it. The gun ran perfectly. Now that I think of it, he did not even limp wrist it (like I have seen so many do) causing a FTF...


          Yeah so anyways, JUST sayin...


          Originally posted by pigpen66m
          What does it cost to reload .50AE I get factory loads for $1.25 when I can get free shipping.
          SINCE I pay about $.19 a round for my Thunder Rounds, I think you can reload 50 AE for about $.34 or less I bet. Save your brass. THAT is gonna be the game changer. Brass and Pills... If you could shoot PC pills then you would be poised to be able to reload for less than $.30 a round I bet...
          7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...

          Need GOOD SS pins to clean your brass? Try the new and improved model...



          And remember- 99.9% of the lawyers ruin it for the other .1%...

          Comment

          • #20
            pigpen66m
            CGN/CGSSA Contributor
            • Jan 2013
            • 1032

            Where can you find bullets for $.19 I saw some and they were a lot more than that. I would love to start reloading just trying to weigh the coast of equipment and consumables with the price of factory ammo.

            Comment

            • #21
              FTC
              Member
              • Jun 2008
              • 329

              The spring in the follower... Inside the follower the little tiny one
              ------------
              luck is a meeting of preparation and opportunity

              Comment

              • #22
                FTC
                Member
                • Jun 2008
                • 329

                Originally posted by pigpen66m
                Where can you find bullets for $.19 I saw some and they were a lot more than that. I would love to start reloading just trying to weigh the coast of equipment and consumables with the price of factory ammo.
                Look for rainier or berrys plated bullets, and save your brass or look for once fired.
                ------------
                luck is a meeting of preparation and opportunity

                Comment

                • #23
                  thegreatcow
                  Member
                  • Nov 2011
                  • 257

                  Welp....hrm I may have made a bit of a blunder in my eagerness to purchase ammo before the gun arrived. One of my friends heard I was getting a new Desert Eagle so I bought a bunch of .44mag rounds of of him as he said he no longer had any guns that used em. I asked him what size they were but he didn't know. I weighed them and it turns out that they're 300gr hollowpoints. He said they were from BVAC and they look pretty nice but they have the same problem as my first attempts at reloads, namely, I think they're too big for the mag, can't load more than 3 of them.

                  Assuming I can't get him to buy the bullets back from me...erm anyone interested in 300gr 44mag hollowpoints? Got about 300 of them to get rid of...I figure I'll put them in the wts forum, I've got some processed .223 brass I've been meaning to get rid of as well.
                  Last edited by thegreatcow; 08-25-2014, 9:55 PM.

                  Comment

                  • #24
                    pigpen66m
                    CGN/CGSSA Contributor
                    • Jan 2013
                    • 1032

                    Originally posted by FTC
                    Look for rainier or berrys plated bullets, and save your brass or look for once fired.
                    Thanks for the info.

                    Comment

                    • #25
                      thegreatcow
                      Member
                      • Nov 2011
                      • 257

                      Well Stilly I took your advice and went and got another barrel with the muzzle brake. Though I think MR needs to check their stock more carefully. They sent me a barrel covered in rust and what looks like calcium deposits. Looks like my conversion project is on hold till I can get things squared with them


                      Here's hoping they can get one sent to me real quick.
                      Last edited by thegreatcow; 09-18-2017, 10:59 PM.

                      Comment

                      • #26
                        stilly
                        I need a LIFE!!
                        • Jul 2009
                        • 10685

                        Originally posted by thegreatcow
                        Well Stilly I took your advice and went and got another barrel with the muzzle brake. Though I think MR needs to check their stock more carefully. They sent me a barrel covered in rust and what looks like calcium deposits. Looks like my conversion project is on hold till I can get things squared with them

                        [Fapping images snipped]

                        Here's hoping they can get one sent to me real quick.

                        BAH! Surface rust! Hit it with some baricade or CLP and it SHOULD wipe off. Else call them and complain. Is this the .50 AE barrel you got? Cause DAMN...

                        I wanted a .50 to test my PC in. But that will wait until I have a full time job.

                        Lookit choo go... :O



                        Originally posted by pigpen66m
                        Where can you find bullets for $.19 I saw some and they were a lot more than that. I would love to start reloading just trying to weigh the coast of equipment and consumables with the price of factory ammo.
                        BRAH...

                        I build my own. I do NOT buy them. You DO know that reloading means that you assemble things right? That means you hunt down components at the cheapest price possible and make your purchase.

                        Example:
                        1 completed round = 4 parts, case, primer, powder, and projectile.

                        SO, using the above math, I picked up a box of Xtreme bullets- 500 for $46, a bottle of H-110 for $17, 1k primers for $18 and I already had the cases.

                        SO, do the math:
                        Pills = .092 each (Calguns GB)
                        Powder = (24gr charge) .058 (My own POWDER GB)
                        Primer = .018 (My own PRIMER GB)
                        Case = 0.0 (Leftovers...)

                        Total per round: .168 or $.17 cents each.

                        IF I were to buy with TODAY'S components:
                        H-110 = $24.99 1/lb
                        1k primers = $27.54 (tula LPP)
                        Pills = 62.00 per 500

                        Powder: .085
                        Pills: .124
                        Case: 0.0
                        Primer: .027
                        Total: .236 or about .24 cents a round.

                        BUT, .24 + .17 = average of about .21 cents

                        Thankfully for me I purchased a LOT of primers/pills and powder back in 2010/2011 and got great prices.

                        And THAT is the end of this post.
                        Last edited by stilly; 08-27-2014, 3:50 PM.
                        7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...

                        Need GOOD SS pins to clean your brass? Try the new and improved model...



                        And remember- 99.9% of the lawyers ruin it for the other .1%...

                        Comment

                        • #27
                          jeffy1021
                          Member
                          • Sep 2013
                          • 155

                          Good timing on this thread as my DE 44 will be coming out of jail soon. Thanks for everyone that contributed the good info. I plan to try 4227 first since I have some already along with 240gr xtreme plated and CCI LPM at 1.60 OAL. Charge wise, I will start at about 1/3 way between starting and max loads according to my manual since I keep reading that the DE likes warm to hot loads.

                          I think as long as I can build up a load with 4227 to get the DE to cycle reliably that will be good enough for me. And from what I've read that shouldn't be a problem.

                          But after reading this, I may need to get my hands on some Blue Dot and H110 to try out as well =).

                          If anyone has any other tips for reloading for the DE, I would love to hear them!
                          Last edited by jeffy1021; 08-27-2014, 6:09 PM.

                          Comment

                          • #28
                            jeffy1021
                            Member
                            • Sep 2013
                            • 155

                            Do you guys think it's necessary to shoot through a box of factory ammo to get a baseline first before shooting hand loads?

                            Comment

                            • #29
                              stilly
                              I need a LIFE!!
                              • Jul 2009
                              • 10685

                              Originally posted by jeffy1021
                              Good timing on this thread as my DE 44 will be coming out of jail soon. Thanks for everyone that contributed the good info. I plan to try 4227 first since I have some already along with 240gr xtreme plated and CCI LPM at 1.60 OAL. Charge wise, I will start at about 1/3 way between starting and max loads according to my manual since I keep reading that the DE likes warm to hot loads.

                              I think as long as I can build up a load with 4227 to get the DE to cycle reliably that will be good enough for me. And from what I've read that shouldn't be a problem.

                              But after reading this, I may need to get my hands on some Blue Dot and H110 to try out as well =).

                              If anyone has any other tips for reloading for the DE, I would love to hear them!
                              When I FIRST started loading for the Deagle, My LOW charged blue dots sounded like pops from a .40 cal. They ejected, but it was kinda like shooting a .22. I THINK they were in the 13-14gr range... Imma hafta look at my load cards, I think I discovered some mouse fart loads...
                              7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...

                              Need GOOD SS pins to clean your brass? Try the new and improved model...



                              And remember- 99.9% of the lawyers ruin it for the other .1%...

                              Comment

                              • #30
                                thegreatcow
                                Member
                                • Nov 2011
                                • 257

                                Man stilly, I can't seem to win.

                                So remember I had trouble loading those initial reloads of mine?

                                I haven't had a chance to get some loading done so I purchased some factory ammo off the shelf since I really wanted to take this bad boy out to the range for the first time....and....

                                yeah...apparently my factory mags don't like factory ammo either...

                                For reference it was some HPR ammo (240gr TMJ) that has gotten some favorable reviews from Turners and also (they were quite nice about letting me check) was loaded to a 1.600 OAL.

                                My mags refuse to let me load more than 4-5 rounds into them.

                                I...gah...I'm just so damn frustrated with this damn thing right now. My compensated barrel shows up rusted to hell, and the three extra mags that I bought with the gun won't hold factory ammo at all. I'm hoping MR will honor my request to either replace or repair the mags. Because now I'm down to 1 magazine that came with the original pistol and that one seems to mostly work but is also really rough.
                                Last edited by thegreatcow; 09-01-2014, 12:55 AM.

                                Comment

                                Working...
                                UA-8071174-1