Unconfigured Ad Widget

Collapse

Reloading for a desert Eagle - Bullet Selection, Loading, Mags, SHENANIGANS!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • thegreatcow
    Member
    • Nov 2011
    • 257

    Reloading for a desert Eagle - Bullet Selection, Loading, Mags, SHENANIGANS!

    Good morning folks, got a question to pose to you all.

    I recently became the owner of a new Desert Eagle 44, and I wanted to start reloading for it right away.

    So far I've got the following:

    Winchester 296 powder (comparable to Hodgdon H110, but good luck finding it in stock)
    Brand new Starline Brass
    Winchester Large Magnum Pistol Primers


    Now for bullets I've come across several warnings that the DE does NOT like lead bullets due to danger of clogging the gas port inside the gun. Pretty much jacketed bullets only.

    I came across a good deal through Powder Valley on some Berry's plated Bullets 240gr Flat Points. Will these be able to hold up to the pressures of the Desert Eagle? I've been getting conflicting reports trolling around on the 'net and I'm not sure what to believe regarding them. I do know from multiple reports on this that the desert Eagle likes to run really hot due to the nature of the gas system and that standard simple plated bullets won't handle the pressures nor the abuse of the rifling. Is this true? Does anyone have any recommendations for the .44 mag regarding brands in particular? Any help would be appreciated!
    Last edited by thegreatcow; 09-17-2014, 11:34 PM.
  • #2
    RNE228
    Senior Member
    • Oct 2013
    • 2458

    When I had my DE, I stuck with 240gr JHP and 2400 for the most part. H110 worked well, but had some flash/fireball to it. Definitely ran them on the warm side to cycle the action.

    Did you try pining Berry's to see what they advise?

    Never had the chance to try plated bullets.

    We shot at Lincoln(near Sacramento). They used to leve steel on the 100m line. That was fun to shoot off hand. The 44DE is capable of very good accuracy.

    Comment

    • #3
      stilly
      I need a LIFE!!
      • Jul 2009
      • 10685

      Originally posted by thegreatcow
      Good morning folks, got a question to pose to you all.

      I recently became the owner of a new Desert Eagle 44, and I wanted to start reloading for it right away.

      So far I've got the following:

      Winchester 296 powder (comparable to Hodgdon H110, but good luck finding it in stock)
      Brand new Starline Brass
      Winchester Large Magnum Pistol Primers


      Now for bullets I've come across several warnings that the DE does NOT like lead bullets due to danger of clogging the gas port inside the gun. Pretty much jacketed bullets only.

      I came across a good deal through Powder Valley on some Berry's plated Bullets 240gr Flat Points. Will these be able to hold up to the pressures of the Desert Eagle? I've been getting conflicting reports trolling around on the 'net and I'm not sure what to believe regarding them. I do know from multiple reports on this that the desert Eagle likes to run really hot due to the nature of the gas system and that standard simple plated bullets won't handle the pressures nor the abuse of the rifling. Is this true? Does anyone have any recommendations for the .44 mag regarding brands in particular? Any help would be appreciated!
      Good for you...

      Load the plated. It is all good. I have fed mine a steady diet of 240G Plated RN from X-Treme with no real issues.

      I have ran lil gun, 2400, 4227, H110, 300-MP, AA#7, AA#9, Blue Dot, Not sure what all else.

      MOST of the time I shot 240GR PLated HP or RN from X-treme, then from PowerBond, then from Rainier + Hornady FTX (200gr)

      My primer of choice is Tula LPP, Maybe LPM, but I honestly can NOT tell a difference yet...

      There are prolly THREE powders that you will love.

      My favorites:
      1. H-110 (show-stopping game winner winner chicken dinner time!)
      2. Blue Dot (This stuff is just AWESOME and CHEAP...)
      3. ??? This spot reserved for AA#9 or 2400.

      I load to 1.600 OAL and you are good to go. If you are running VIRGIN brass though check the brass and trim it down if need be. I heard that Virgin 44 mag brass can be a tad longer then needed, but I have never used it, just read it in an ad on GB one night.

      Expect about 8+ loads from each shell. MAybe more. I have shells crack all the time now, when I pick them up about one in maybe every 20 or so might have a x-mas tree crack in it or whatever.

      The last time I shot the Deagle though it spit on me (Mine seems to do that from time to time) and made my face bleed.

      Finally, if you have those NASTY plastic grips on yours, put on some HOGUE finger grooved grips. They are soft and make it VERY holdable...

      I have not made a purchase for a second 44 mag barrel yet, but when I do I will test out some PC lead pills in it and see how far it gets.

      If you run a full mag of lead down the barrel you will get a single shot gun by the end of the last round or two. Apparently. AT least that was what the guy on Gunbroker with a single shot .50AE barrel said as he put it up for auction at $89.00...
      Last edited by stilly; 08-18-2014, 4:30 PM.
      7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...

      Need GOOD SS pins to clean your brass? Try the new and improved model...



      And remember- 99.9% of the lawyers ruin it for the other .1%...

      Comment

      • #4
        thegreatcow
        Member
        • Nov 2011
        • 257

        Much appreciated for the info sir. Well then I'll have a good supply for some time then! Can't wait to take this bad boy to the range.

        Comment

        • #5
          jwest
          Veteran Member
          • Dec 2008
          • 3958

          Do you have the .50 AE barrel yet?

          I have recipes I have shot for both - I will post a bit later since I am not in the reloading shack at the moment.
          Last edited by jwest; 08-18-2014, 6:05 PM. Reason: Recipes for .44 and .50 AE Deagle.
          sigpic
          "They who can give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety." --- Benjamin Franklin
          Freedom isn't free. Read the Declaration of Independence everyday - it'll keep the New World Order away.
          Quote: Army: "Your ignorant liberal puke rhetoric is tiresome."
          We live in a society of extreme behavior with no electronic self control.

          Comment

          • #6
            thegreatcow
            Member
            • Nov 2011
            • 257

            Not yet, kinda blew my budget for funs this year with my purchase of a VEPR 54r and a VEPR 12 in addition to this pistol. Hopefully can scratch some together later this year.

            Comment

            • #7
              stilly
              I need a LIFE!!
              • Jul 2009
              • 10685

              Originally posted by thegreatcow
              Not yet, kinda blew my budget for funs this year with my purchase of a VEPR 54r and a VEPR 12 in addition to this pistol. Hopefully can scratch some together later this year.
              $600 for a compensated barrel...

              Get the compensator. It looks sweet AND I dunno if it works, but if it does, DAMN. I have never fired my Deagle Uncomped, but I feel like I can shoot it all day long with 240gr and 24.8gr of H110 pushing them... (25.0 is max for that weight)
              7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...

              Need GOOD SS pins to clean your brass? Try the new and improved model...



              And remember- 99.9% of the lawyers ruin it for the other .1%...

              Comment

              • #8
                RNE228
                Senior Member
                • Oct 2013
                • 2458

                I miss my DE! Never replaced it after UPS "lost" it. Criminal was busted with it 10 years later though...

                I had the barrel on that 44 DE Magnaported.

                I always liked the classic load of a 240gr over 2400(who can argue with Elmer Keith!). But, I later loaded with H110. The H110 loads did not seem to have the "snappy" recoil that the 2400 loads had

                The Comped/Ported DE was a joy to shoot on 100m steel. Amazing how accurate an iron sighted 6'' barrel 44mag can be...

                Originally posted by stilly
                $600 for a compensated barrel...

                Get the compensator. It looks sweet AND I dunno if it works, but if it does, DAMN. I have never fired my Deagle Uncomped, but I feel like I can shoot it all day long with 240gr and 24.8gr of H110 pushing them... (25.0 is max for that weight)

                Comment

                • #9
                  stilly
                  I need a LIFE!!
                  • Jul 2009
                  • 10685

                  Originally posted by RNE228
                  I miss my DE! Never replaced it after UPS "lost" it. Criminal was busted with it 10 years later though...

                  I had the barrel on that 44 DE Magnaported.

                  I always liked the classic load of a 240gr over 2400(who can argue with Elmer Keith!). But, I later loaded with H110. The H110 loads did not seem to have the "snappy" recoil that the 2400 loads had

                  The Comped/Ported DE was a joy to shoot on 100m steel. Amazing how accurate an iron sighted 6'' barrel 44mag can be...
                  Yes, the gun is very accurate. I got a 2" group at 30' once with the black sights and for ME that was EXCELLENT at the time. I was so happy I went home and put the target in the window to show it off... (baD i DEA)

                  I have not shot 2400 yet. I HEAR a lot of people talk about how sweet it is, but I have a bottle or two, but I just did not think that it was gonna wow me like the H110 did. Then came the blue dot that was so versatile. ANY powder I can run in .45/.38/9mm and STILL run in .357 and .44 mag I LOVE. Good stuff too...

                  The H110 is just as you say, I think it is NOT snappy, but more softer BOOM BOOM BOOM, like a LOT of gas dumped in your face, but very softly or over a large area. I can feel both of my lips move on it, instead of just hot gasses up my nose...

                  I <3 Mah DEagle. Imma gonna take it out tonight at the Calguns Insight Shoot and see how it performs now that it is back from MR with a new mag spring and a clean bill of health...

                  Maybe go get a bite to eat afterwards, then who knows, Maybe I will get lucky and it will come home with me to MY place... (cue 80's porn music!)
                  7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...

                  Need GOOD SS pins to clean your brass? Try the new and improved model...



                  And remember- 99.9% of the lawyers ruin it for the other .1%...

                  Comment

                  • #10
                    thegreatcow
                    Member
                    • Nov 2011
                    • 257

                    Damn it turns out that MR will actually add a brake to your existing barrel for you.

                    *looks further*

                    Ah dammit it costs like 210 bucks all told and my pistol would be out of action for another 3 weeks. That's a toughy :-/

                    Comment

                    • #11
                      stilly
                      I need a LIFE!!
                      • Jul 2009
                      • 10685

                      Originally posted by thegreatcow
                      Damn it turns out that MR will actually add a brake to your existing barrel for you.

                      *looks further*

                      Ah dammit it costs like 210 bucks all told and my pistol would be out of action for another 3 weeks. That's a toughy :-/
                      YEah but it is worth it I think.

                      It should only be about hmmm, yeah, about 2-3 weeks, but they are fast at turn around time so most of that is only shipping time if you ship it ground. Ship overnight and get it back in about a week and a half. They are excellent folks over there.

                      I just got mine back and shot it last night at Insight in Artesia and it shot very nice. I am please that it works and that I cleaned it up enough to not jam...
                      7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...

                      Need GOOD SS pins to clean your brass? Try the new and improved model...



                      And remember- 99.9% of the lawyers ruin it for the other .1%...

                      Comment

                      • #12
                        jwest
                        Veteran Member
                        • Dec 2008
                        • 3958

                        Originally posted by thegreatcow
                        Good morning folks, got a question to pose to you all.

                        I recently became the owner of a new Desert Eagle 44, and I wanted to start reloading for it right away.

                        So far I've got the following:

                        Winchester 296 powder (comparable to Hodgdon H110, but good luck finding it in stock)
                        Brand new Starline Brass
                        Winchester Large Magnum Pistol Primers


                        Now for bullets I've come across several warnings that the DE does NOT like lead bullets due to danger of clogging the gas port inside the gun. Pretty much jacketed bullets only.

                        I came across a good deal through Powder Valley on some Berry's plated Bullets 240gr Flat Points. Will these be able to hold up to the pressures of the Desert Eagle? I've been getting conflicting reports trolling around on the 'net and I'm not sure what to believe regarding them. I do know from multiple reports on this that the desert Eagle likes to run really hot due to the nature of the gas system and that standard simple plated bullets won't handle the pressures nor the abuse of the rifling. Is this true? Does anyone have any recommendations for the .44 mag regarding brands in particular? Any help would be appreciated!
                        Here are bullets I have loaded for the DE:

                        .44 Mag:
                        Hornady #: 44200
                        Hornady #: 44280
                        Barnes #: 42922

                        .50 AE:
                        Hornady #: 50101
                        Hornady #: 50100
                        Barnes #: 50028

                        Looks like Magnum Research is having a special on magazines when you buy a DE: http://www.magnumresearch.com/PDF/FDEM2014.pdf

                        Regards,
                        jwest
                        sigpic
                        "They who can give up essential liberty to obtain a little temporary safety, deserve neither liberty nor safety." --- Benjamin Franklin
                        Freedom isn't free. Read the Declaration of Independence everyday - it'll keep the New World Order away.
                        Quote: Army: "Your ignorant liberal puke rhetoric is tiresome."
                        We live in a society of extreme behavior with no electronic self control.

                        Comment

                        • #13
                          thegreatcow
                          Member
                          • Nov 2011
                          • 257

                          Ok folks now I have another question for you.

                          So I loaded up a batch of 10 rounds just to get used to the process (still haven't gotten the gun yet, just the mags, still in 10 day jail atm) and I'm encountering a strange issue.

                          They're 240gr JHP rounds and I made sure their OAL is about 1.611, about .001 off what the Lyman manual recommends.

                          However for the life of me I cannot load more then 2 rounds in to the magazine. The first round feeds into the mag fine. The 2nd one gives a little resistance due to what I think is that weird magazine switch on the side of the mag (what the heck is that for anyway??).

                          However the 3rd bullet just refuses to be loaded. In now after several attempts if I try to force the 2nd bullet down to fit the 3rd, it literally becomes wedged into the mag and the follower refuses to go down further preventing me from loading the 3rd bullet and requiring me to disassemble the mag entirely (and experience the joyous joy of that massive spring shooting out of the underside of the mag and spending 20 minutes looking around my living room trying to find it and the mag plate.) and tap the rounds out from the bottom and slide them out through the feed mouth. I double and triple checked with digital calipers that my cartridges are at or nearly at the recommend oal length and I've cleaned and lubed up the mag with some CLP just to be sure but I still can't make any progress.

                          Anybody have any idea what could be wrong? I'm really worried here.

                          Comment

                          • #14
                            stilly
                            I need a LIFE!!
                            • Jul 2009
                            • 10685

                            Originally posted by thegreatcow
                            Ok folks now I have another question for you.

                            So I loaded up a batch of 10 rounds just to get used to the process (still haven't gotten the gun yet, just the mags, still in 10 day jail atm) and I'm encountering a strange issue.

                            They're 240gr JHP rounds and I made sure their OAL is about 1.611, about .001 off what the Lyman manual recommends.

                            However for the life of me I cannot load more then 2 rounds in to the magazine. The first round feeds into the mag fine. The 2nd one gives a little resistance due to what I think is that weird magazine switch on the side of the mag (what the heck is that for anyway??).

                            However the 3rd bullet just refuses to be loaded. In now after several attempts if I try to force the 2nd bullet down to fit the 3rd, it literally becomes wedged into the mag and the follower refuses to go down further preventing me from loading the 3rd bullet and requiring me to disassemble the mag entirely (and experience the joyous joy of that massive spring shooting out of the underside of the mag and spending 20 minutes looking around my living room trying to find it and the mag plate.) and tap the rounds out from the bottom and slide them out through the feed mouth. I double and triple checked with digital calipers that my cartridges are at or nearly at the recommend oal length and I've cleaned and lubed up the mag with some CLP just to be sure but I still can't make any progress.

                            Anybody have any idea what could be wrong? I'm really worried here.
                            Try shortening them and make SURE you are NOT using Hornady FTX missle tips...

                            Oh yeah, JHP- Remember, Book writers are SNOBS and they do not care if you have a Deagle. (because it is a sucky gun compared to their blackhawks and vaqueros... YEah wtfe...) There are loads in the books that are WAY too long for the deagle. 1.600 is as LONG as I go. If you go much further, you might be hitting the front of the mag. The switch on the side of the mag is the catch for the slide stop. That is my guess anyways.

                            Make a few rounds at 1.600 and see how they load.

                            Hey wait a second. Is that a FACTORY mag you got? Take it apart and check that all is mechanically good with the mag. And if it is a PRO mag- CHUCK it cause it SUCKS. I do not care WHAT homeboy on the interwebs webpage he made says, he is full of **** if he thinks switching a promag body with the deagle springs works like a charm. BULL****...
                            Last edited by stilly; 08-22-2014, 1:38 AM.
                            7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...

                            Need GOOD SS pins to clean your brass? Try the new and improved model...



                            And remember- 99.9% of the lawyers ruin it for the other .1%...

                            Comment

                            • #15
                              thegreatcow
                              Member
                              • Nov 2011
                              • 257

                              Ok i'll give that a shot. And they are the factory desert eagle mags. So far I disassembled the first one and it definitely seemed to run a bit rough so I made sure to wipe the inside out and placed a small film of CLP on the side and on the spring.

                              As for the oal, I'll definitely see if I can load them shorter. That's good to know. I wish reloading manuals made mention of that None of them make any distinction between loading between a revolver and semiauto load. All I've been able to find out is to generally load hotter than normal because that's what the DE likes.

                              Gragh so frustrating.

                              Edit - And I do also appreciate the advice Stilly, thank you very much for the tips.
                              Last edited by thegreatcow; 08-22-2014, 2:06 AM.

                              Comment

                              Working...
                              UA-8071174-1