What bullet diameter are you running?
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
TiteGroup
Collapse
X
-
For Leethe4th, that one fouled barrel. Going to take a lot of scrubbing to get the lead out.
I think one of the problems is the bullets. Titegroup burns pretty hot, so I think it may be melting your lead bullets. You might want to switch to plated bullets or if your sticking with Bear Creek bullets, you might want to think about a different powder.
There are a lot of variables regarding leading that I don't know about, since there are some shooters that use Titegroup with lead bullets that don't have leading problems.
The simple solutions are to change bullets or change powderComment
-
Obliteration is the key.
Your commercial bullets are to hard and to small.
Therefore the hot gasses pass by the lead projectiles and act like a cutting torch.
Softer lead and a bullet that matches your barrel size better will help that problem.
But then casting your own will create a whole new obsession you may not want to get started.Comment
-
Getting the lead out doesn't require any scrubing at all. I use the old Bullseye shooters cocktail mix of 50% white vinegar and 50% hydrogen peroxide. Let if fizz for 10 minutes and pour it out. Sitting on 24 lbs of TiteGroup so it will be a few years before the next powder even at an average of 16,000 rounds per year. I do run Montana Gold JHP's for the big matches, but run Bear Creek for the local USPSA stuff. I'm not concerned about the leading either, just want to get my blood lead level down. Going to go with Bayou Bullets next time.For Leethe4th, that one fouled barrel. Going to take a lot of scrubbing to get the lead out.
I think one of the problems is the bullets. Titegroup burns pretty hot, so I think it may be melting your lead bullets. You might want to switch to plated bullets or if your sticking with Bear Creek bullets, you might want to think about a different powder.
There are a lot of variables regarding leading that I don't know about, since there are some shooters that use Titegroup with lead bullets that don't have leading problems.
The simple solutions are to change bullets or change powder
the lead coctail

and what comes out of the barrel
Comment
-
It would be interesting to see. They told me they have a .355" bore and a. .357" throat, but I suspect the throat is bigger and you're not getting a good seal.Comment
-
I too have been running 124gr Xtremes with 4.1 gr of tight group. But I've been using an overall length of 1.164 and 1.150. What gun are you shooting those out of? I've been using my 92fs."But mainly democrat voters would still vote Democrat if they elected Satan himself who ate babies as they came out of mother's wombs and killed people in the street. They hate republicans that much and are in that level of denial about what their party is about. They just simply can't handle the cognitive dissonance...." -SkilletboyComment
-
I shot my first batch of 9mm, 124gr Xtreme with a tad less that 3.8 of Titegroup. Was getting some black cases. I assumed I was a little light. Thanks for confirming. I'll run the next batch closer to 4.0gr.Comment
-
7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...
Need GOOD SS pins to clean your brass? Try the new and improved model...

And remember- 99.9% of the lawyers ruin it for the other .1%...Comment
-
That's true. I've put close to 3,000 rounds through my Security-Six using both Bullseye and Titegroup loads, and no problems. Granted, that's a revolver, but I also did about 500 rounds with a Ruger SR-45 (my Titegroup load in .45 ACP), and no problems related to cleaning (it was simply a brand new gun; now it runs perfectly). So, powder fouling with a sane load shouldn't be a problem in practice.
In my lightweight .45 Colt load, I also use Titegroup. The cases will get maybe a little sooty close to the case mouth, but that's what brass tumblers are for. Nothing to worry about. This also happened w/ Bullseye, though, so at least it's consistent."San Francisco Liberal With A Gun"
F***ing with people's heads, one gun show at a time. Hallelujah!
http://www.sanfranciscoliberalwithagun.com (reloading info w/ videos)
http://www.liberalsguncorner.com (podcast)
http://www.youtube.com/sfliberal (YouTube channel)
----------------------------------------------------
To be a true Liberal, you must be 100% pro-Second Amendment. Anything less is inconsistent with liberalism.Comment
-
Leethe4th, I'm am definitely going to try out your barrel lead cocktail. I've been scrubbing with a bore brush and shooters choice all this time and its not very efficient. Your cocktail is what I've been missing...until now. Good thing is that I already have those ingredients at the house, I just didn't know that they could be used for guns.
Joefear7, I'm using those Titegroup loads out of a P228 and like you, a 92FS. I am happy with the load, but my guns do get significantly hotter after a couple hundred rounds as compared to a couple hundred rounds loaded with 231 or AA2. I like using Titegroup in my 45 ACP too. I use 4.4gr, WLP, 230gr plated RN, seated to 1.260"Comment
-
I hear that cocktail strips the bluing out....Like the TG better than Unique for 9mm ? I find Unique to be right on the $$ 5.00 grains using 124 plated...Leethe4th, I'm am definitely going to try out your barrel lead cocktail. I've been scrubbing with a bore brush and shooters choice all this time and its not very efficient. Your cocktail is what I've been missing...until now. Good thing is that I already have those ingredients at the house, I just didn't know that they could be used for guns.
Joefear7, I'm using those Titegroup loads out of a P228 and like you, a 92FS. I am happy with the load, but my guns do get significantly hotter after a couple hundred rounds as compared to a couple hundred rounds loaded with 231 or AA2. I like using Titegroup in my 45 ACP too. I use 4.4gr, WLP, 230gr plated RN, seated to 1.260"Looking 4" Python 686/ Redhawks, Les Baer.... East Bay NorCalComment
Calguns.net Statistics
Collapse
Topics: 1,870,990
Posts: 25,178,265
Members: 358,862
Active Members: 5,382
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 37052 users online. 121 members and 36931 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.


Comment