The pics @ 90• I don't know how to rotate it.
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
odd issue with sizing 9mm
Collapse
X
-
You answered your own question but the light bulb only came on dim. If the expander die doesn't take out the wrinkles you may need to use a standard full length die to iron out the wrinkles.
Or get rid of the p7m8 and get a Glock.

Sorry, the devil made me do it.
Comment
-
Its not just wrinkle. The very edge is folded over towards outside of the case mouth, very small slight folds. Which make the teeth mark looking things.Comment
-
Had a similar problem, of the neck folding on oneside. I cleaned the die body and shell holder (sonic, kroil, airwhip). Fixed it. Looks like a sharp edge on the die. Mine have a rounded leading edge. I would try a different carbide sizer.Comment
-
Glock +1Comment
-
Thinking about it Kielbasa and if you relate it to body work on a car then. on a car a dent stretches the metal, you sometimes have to heat it to shrink it & get the oil can effect to go away. you know you barely push on the panel and it pops in and then back out.
with the fluted chamber the brass will just barely stretch into the grooves between the ribs (even if you cant see it, it does). then when you run it into the sizer the high and low spots of the fluting size different and the extra metal has to go somewhere since the die wont let it "oil can" like a large car panel does. you only notice it on the edge because it is the only edge that the stress can go to.
have you checked case length? maybe you can trim the cases to get rid of the problem. or maybe anneal the brass before sizingNRA Life MemberComment
Calguns.net Statistics
Collapse
Topics: 1,870,884
Posts: 25,177,107
Members: 358,862
Active Members: 5,395
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 25661 users online. 42 members and 25619 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment