Unconfigured Ad Widget

Collapse

odd issue with sizing 9mm

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    XVIga_Rob
    Senior Member
    • May 2012
    • 2354

    Originally posted by kielbasavw
    Per instructions carbide die should never touch shell holder
    Touching & striking are not the same.

    Sizing With Carbide Sizer Die's (pg. 4)




    Hope you were able to correct the issue you were having.

    Comment

    • #17
      mark501w
      Senior Member
      • Apr 2011
      • 1699

      Here's mine right now.
      Last edited by mark501w; 06-19-2014, 11:27 AM.

      Comment

      • #18
        kielbasavw
        Senior Member
        • Aug 2011
        • 1611

        Thats what mine looked like before the tumble. After the tumble there are still faint marks/staining

        Comment

        • #19
          Bastard
          • Jul 2009
          • 2209

          any luck figuring this out?

          now that I am finally home & able to look at my die I am going to guess that there is either something in yours or you decapping rod is bent

          Comment

          • #20
            J-cat
            Calguns Addict
            • May 2005
            • 6626

            The P7 has a fluted chamber which acts on the brass like a collet except the brass expands into the teeth. That's why the case mouth looks like a ratchet. You should screw the die to touch the shell holder. The press will spring away and so will the die so the shell holder will not crush the carbide insert. I've been doing this for 20 years, mostly with 9mm. I use a Redding die. No problems.

            Comment

            • #21
              mark501w
              Senior Member
              • Apr 2011
              • 1699

              This will be the 2nd reloading doesn't look like the op's.

              Comment

              • #22
                kielbasavw
                Senior Member
                • Aug 2011
                • 1611

                Nothing in the die, de cap rod straight.

                Comment

                • #23
                  mark501w
                  Senior Member
                  • Apr 2011
                  • 1699

                  I guess I'll have to put some more time on the bench with the gun & see how it goes. Load'em up& see how it goes.

                  Comment

                  • #24
                    mark501w
                    Senior Member
                    • Apr 2011
                    • 1699

                    By the way I set my carbide dies to touch the holder & cam over.

                    Comment

                    • #25
                      kielbasavw
                      Senior Member
                      • Aug 2011
                      • 1611

                      I did size one piece of nickel brass, that I did not shoot (range find) that cracked along the entire side after sizing. Another for my collection on brass gone wrong

                      Comment

                      • #26
                        mark501w
                        Senior Member
                        • Apr 2011
                        • 1699

                        Nickel is a little different I think it's a little more brittle.

                        Comment

                        • #27
                          kielbasavw
                          Senior Member
                          • Aug 2011
                          • 1611

                          I might just re size them all with the die all the way down, instead of 3/4 turn out. Flare, and crimp should remove any funkyness. If I can get a way to trim 9mm id do it to. But all I have are trim dies for a couple other calibers I load

                          Comment

                          • #28
                            mark501w
                            Senior Member
                            • Apr 2011
                            • 1699

                            How many times have you reloaded the cases? I know using rifle cases shot in aHK are worthless. Results from yesterday. @ 15 paces.
                            Last edited by mark501w; 06-19-2014, 11:27 AM.

                            Comment

                            • #29
                              kielbasavw
                              Senior Member
                              • Aug 2011
                              • 1611

                              Being this is the first time I even looked at my 9mm dies, id saymy once fired factory brass has only been LOADED once ;-)

                              Comment

                              • #30
                                kielbasavw
                                Senior Member
                                • Aug 2011
                                • 1611

                                Maybe your sights are a hair off, or is it only shooting to the left with your reloads

                                Comment

                                Working...
                                UA-8071174-1