Unconfigured Ad Widget

Collapse

small pistol primer in .45 help

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • DLBullyz
    Senior Member
    • Jan 2013
    • 627

    small pistol primer in .45 help

    do i still use the same amount of powder as i do with the large pistol primer?
    if not how do i know how much to use?
    thanks in advance
  • #2
    Divernhunter
    Calguns Addict
    • May 2010
    • 8753

    Everything else is the same. You just need to use the SPP in the 45ACP brass that takes SPP. Same powder and amount. Same bullets and crimp.
    A 30cal will reach out and touch them. A 50cal will kick their butt.
    NRA Life Member, NRA certified RSO & Basic Pistol Instructor, Hunter, shooter, reloader
    SCI, Manteca Sportsmen Club, Coalinga Rifle Club, Escalon Sportsmans Club, Waterford Sportsman Club & NAHA Member, Madison Society member

    Comment

    • #3
      jdmstuff
      Senior Member
      • Jul 2012
      • 761

      Originally posted by Divernhunter
      Everything else is the same. You just need to use the SPP in the 45ACP brass that takes SPP. Same powder and amount. Same bullets and crimp.
      +1
      Same amount of powder.

      Comment

      • #4
        stilly
        I need a LIFE!!
        • Jul 2009
        • 10685

        +2

        Or give it to someone who wants to deal with sp .45 brass. Or mail it back to blazer or federal with a postcard saying THANKS ASSHATS...
        7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...

        Need GOOD SS pins to clean your brass? Try the new and improved model...



        And remember- 99.9% of the lawyers ruin it for the other .1%...

        Comment

        • #5
          chrometip78
          Member
          • Jul 2009
          • 301

          X3, I don't have anything clever to add.

          Sent from my MB860 using Tapatalk 2

          Comment

          • #6
            CEDaytonaRydr
            Veteran Member
            • Feb 2010
            • 4141

            I use them as "give aways" sometimes. My friends aren't going to really care, and if I lose the brass, it's no big deal.

            Comment

            • #7
              wild_weasel
              Senior Member
              • Dec 2008
              • 1256

              I have saved up a respectable amount of the Federal small primer 45 ACP brass along with a few in other brands. For the time being it is an added step having to sort it out from my range pickups. But if I were low on components and it came down to loading 38 Special or 45 ACP you bet I would be using my small pistol primers in the 45 ACP cases.

              Cheers,
              W-W
              sigpic
              Towards thee I roll, thou all-destroying but unconquering whale; to the last I grapple with thee; from hell's heart I stab at thee; for hate's sake I spit my last breath at thee.

              Comment

              • #8
                Corbin Dallas
                CGN/CGSSA Contributor - Lifetime
                CGN Contributor - Lifetime
                • May 2006
                • 6276

                If you don't want them I can use them.
                NRA Life Member and Certified Instructor: Pistol - Rifle - Shotgun - PPITH - PPOTH - NRA Certified RSO

                WTB the following - in San Diego
                --Steyr M357A1 357SIG
                --Five Seven IOM (round trigger guard)

                Never forget - השואה... לעולם לא עוד.

                Comment

                • #9
                  stilly
                  I need a LIFE!!
                  • Jul 2009
                  • 10685

                  Originally posted by wild_weasel
                  I have saved up a respectable amount of the Federal small primer 45 ACP brass along with a few in other brands. For the time being it is an added step having to sort it out from my range pickups. But if I were low on components and it came down to loading 38 Special or 45 ACP you bet I would be using my small pistol primers in the 45 ACP cases.

                  Cheers,
                  W-W
                  To save up a respectable amount you must have gone through a LOT of shells...

                  I hear you but I joke about this right now because, well, quite frankly because I can. Yeah, when it comes down to it boxer primed is boxer primed and if I have to use a different primer, no biggie, (so I say now). But still. Reloading is a nice thing in that very seldom does anything change and when it does it is voluntary and for the better. Now I find that I have been infiltrated by these little tight brass-holes and they are all over the place. I am glad that there are only two types of primers that can be jammed into a 45, small and large. But still, it would be really simple if ALL rounds used the same primer. Now THAT would be cool. I would volunteer for that although I would ***** about being infiltrated again... But seriously, I have to catch myself because sometimes I will grab the wrong primers off the shelf and when I open them and see green or red instead of yellow or whatnot I am like, WTF? Oh, wrong size, and then use them anyways because they rarely matter it seems. I will say though that with a LPM instead of a LP I do not see as much crap blown onto my arms and face when loading 44 mag. But I have yet to have a round NOT fire due to a bad or wrong primer. I have loaded over 2k rounds now, 1600+ 44 mag and the rest have been .45 and 9mm and I am currently doing .45. Now with the ptx mod I am happily doing .45cal.
                  7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...

                  Need GOOD SS pins to clean your brass? Try the new and improved model...



                  And remember- 99.9% of the lawyers ruin it for the other .1%...

                  Comment

                  • #10
                    DLBullyz
                    Senior Member
                    • Jan 2013
                    • 627

                    ya it sucks having to sort them, i didnt think i was going to use them but now i barley have any large primer .45

                    Comment

                    • #11
                      stilly
                      I need a LIFE!!
                      • Jul 2009
                      • 10685

                      You poor thing. It is too bad you are in Sacramento. I would sell you a bag of it for a ridiculously low price if you were closer to me. It would be dirty but it would be a bag of mixed primer 45 because I do not have the time to go through it all and decap and clean until it is time to make some ammo.
                      7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...

                      Need GOOD SS pins to clean your brass? Try the new and improved model...



                      And remember- 99.9% of the lawyers ruin it for the other .1%...

                      Comment

                      • #12
                        DLBullyz
                        Senior Member
                        • Jan 2013
                        • 627

                        haha damn i was just in los angels today

                        Comment

                        • #13
                          wild_weasel
                          Senior Member
                          • Dec 2008
                          • 1256

                          Could it be that Large Pistol Primers are going the way of the old balloon head cases? While I am okay with the status quo of large and small pistol primers it would have been neat if the industry had standardized on the small format of primers early on for pistol ammo.
                          I shoot a lot of 30 Carbine in my BlackHawk using 32-20 data and small pistol primers.

                          Cheers,
                          W-W
                          sigpic
                          Towards thee I roll, thou all-destroying but unconquering whale; to the last I grapple with thee; from hell's heart I stab at thee; for hate's sake I spit my last breath at thee.

                          Comment

                          • #14
                            xbimmers
                            Senior Member
                            • Aug 2008
                            • 1646

                            "I'll take" any unwanted sp 45 brass......
                            How do you travel...

                            Comment

                            • #15
                              GW
                              I need a LIFE!!
                              • May 2004
                              • 16078

                              Which manufacturers are making small primer 45 acp?
                              sigpicNRA Benefactor Member

                              Comment

                              Working...
                              UA-8071174-1