help me order a dillon 650 setup

[problemchild]

Actually, I think PC's gun is a LMT MWS, the only Semi-308 to acheive half MOA (which is very hard to do)... Don't know any other Semi-308 which can replicate

GAP10

Yeah I do have a 5r ss barrel too.

[problemchild]

nice shooting pc!!! that 2nd target done with the wc846 and hornady's recipe you just got? i too have nicer ar's that should be able to do that, but i won't be putting a scope on them anytime soon. they just have aimpoint t1's and irons for fast engagement at the carbine classes i run in. but it's nice to know the accuracy is there if when i need it.

thanks for the GREAT TIP on sanding and polishing the powder funnel and sliders. makes perfect sense to do so. i'll do that to my setup while putting it together (hopefully it gets here tomorrow).

hey khanh, for all the precision stuff, i still plan on doing that on the rock chucker single stage. but its nice to see that you can mass produce sub moa ammo quickly on the 650. if i ever get as good in reloading quality control like pc, i may just switch to the 650 for everything

Its 308 so no. The load was 46gr wc846, 168 Amax, cci-br, Lc-ofb. I have some hornady ball ammo here Im going to load up for this weekend. It wont shoot as good as the 168 amax but Im hoping for 1".

NOTE: I did not sand and polish I only polished with Flitz and an old T-shirt by hand. I polished everything the powder comes in contact with. I think Enos has a how-to on it.

I also polished the powder bars. Then I installed the big blue knob to make fine powder adjustments much easier.

http://forums.1911forum.com/showthread.php?t=154783

[Bongos]

Its 308 so no. The load was 46gr wc846, 168 Amax, cci-br, Lc-ofb. I have some hornady ball ammo here Im going to load up for this weekend. It wont shoot as good as the 168 amax but Im hoping for 1".

NOTE: I did not sand and polish I only polished with Flitz and an old T-shirt by hand. I polished everything the powder comes in contact with. I think Enos has a how-to on it.

I also polished the powder bars. Then I installed the big blue knob to make fine powder adjustments much easier.

http://forums.1911forum.com/showthread.php?t=154783

Wow! that is awesome, I'm going to give it a try!

[Sub95]

harbor freight sells a small buffing pad for a drill that would work great for that, its the one on the left side half round, they used to sell them by themselfs not sure now. just have to make sure you get any compound/polishing cream out of there.

http://www.harborfreight.com/14-piece-aluminum-polishing-kit-98707.html

[Bongos]

GAP10

Yeah I do have a 5r ss barrel too.

It doesn't look like a GAP10

http://www.gaprecision.net/ga-precision-2011-custom-rifles/ga-precision-g.a.-precision-gap-10-.html

does GAP uses LMT MWS as a base?

[problemchild]

It doesn't look like a GAP10

http://www.gaprecision.net/ga-precision-2011-custom-rifles/ga-precision-g.a.-precision-gap-10-.html

does GAP uses LMT MWS as a base?

I was answering his other remark...........

"the only Semi-308 to acheive half MOA "

And I said Gap10.........

As another rifle to achieve moa or less.......

[hayaku]

the new press has arrived!!! thanks to everyone that gave me advice. this thing is awesome. i stayed up most of the night playing with it. setup was a breeze, took about 30 mins or so to put it all together?



now i have to clean up the garage so i can get the reloading bench setup and then the mass reloading fun begins. this thing is huge compared to my rock chucker lol

(yes, you do get a bowl of rice with every crank of the handle.. )

[vonderplatz]

Very nice' you'll love the Dillon.

[Na-vah-duh]

Mount it where it sits now, it would look good

[Bongos]

Love it! Nice touch with the rice cooker and roasted pork!

[problemchild]

If you need any help im in socal too.