Tweet
Do you Tumble Clean your Brass before you Resize or
Resize and then Tumble Clean ?
I usually Tumble first
Resize and then Tumble Clean ?
I usually Tumble first
-
-
I tumble first, resize after, keeps dirt out of the die, and media out of the flash hole. I find I don't get clean primer pockets tumbling while deprimed anyways.
Most people will tumble before sizing, but some decap before tumbling or sizing with a universal die -
Empty brass from range bag into tumbler.
XL-650 to feed the: .45ACP's Les Baer Concept V, Ruger SR 1911, Ruger Nightwatchman,custom built Colt M1911, Springfield .45ACP Loaded.. 9MM SA Range Officer,Ruger P-85, Springfield Stainless 9MM loaded, SA 9MM 5.25" XDM, Springfield 9mm Stainless Range Officer, STI double stack .45ACP.
IDPA A41750 Safety Officer
NRA Certified RSO
"Stay out of the deep end of the pool; correct the problem with your credit card, not your dremel!"Comment
-
Brass
I tumble then resize and decap, then tumble again prior to loading. That removes the sizing film. The media sometimes does plug the flash hole on that second tumble, but I have a pointed alignment tool I use to clean it outI won't be wronged
I won't be insulted
And I won't be laid a hand on.
I don't do these things to other people, and I require the same from them.....John WayneComment
-
Tumble first
Resize
Tumble again
then start loadingComment
-
Tumble firstComment
-
do you trim the length before or after you run it through the sizing die, also how often , sorry new to all this just got a 550b and trying to learn as much as i can before i start
Zombie Stickers For Sale
ClassifiedWeapons.com
Looking for a particular parts kit? Check out our parts kit locator that is automatically updated every 6 hours. Now you can see parts kits being offered by multiple websites in one location. Just select the parts kit button on the right of the home page to begin looking.
-------
Home Builds- 1919a4, Sten Mk3, Romy G Ak-47, PSL Pistol,Romanian RPKComment
-
Tumble first, then resize/decap. Tried it the other way and got cleaning media grains stuck in the flash hole."San Francisco Liberal With A Gun"
F***ing with people's heads, one gun show at a time. Hallelujah!
http://www.sanfranciscoliberalwithagun.com (reloading info w/ videos)
http://www.liberalsguncorner.com (podcast)
http://www.youtube.com/sfliberal (YouTube channel)
----------------------------------------------------
To be a true Liberal, you must be 100% pro-Second Amendment. Anything less is inconsistent with liberalism.Comment
-
Tumble, resize and perp then tumbleComment
-
Hey Shooter,
click on the RELOADING .223 VIDEO below my signature.
It was made with yall in mind.
Enjoy.
In Christ: RaymondComment
-
got a magical tool for cleaning media from flash hole. your everyday toothpick. been using the same one for 2yrs now, lol.Comment
-
Quick tumble to remove dirt and grit
Lube, deprime, and size on the progressive
Trim on the Possum Hollow chucked up in the drill press
Long tumble, with polish
Load on progressive.
The trick is to have a decapping die set up in the sizing station when you are loading, that will clear any media stuck in the flash hole.I've never seen an American flag burned at a gun show.Comment
-
I tumble then resize. I rarely clean the primer pocket but if I do then after resizing/depriming. I also rarely trim except my 50bmg. But I do trim if they get overly long in my no-go gauge.A 30cal will reach out and touch them. A 50cal will kick their butt.
NRA Life Member, NRA certified RSO & Basic Pistol Instructor, Hunter, shooter, reloader
SCI, Manteca Sportsmen Club, Coalinga Rifle Club, Escalon Sportsmans Club, Waterford Sportsman Club & NAHA Member, Madison Society memberComment
-
Actually I only started collecting Milsurps 3 years ago. I think I might own about 24...They're cheaper than guns that will most likely never get the opportunity to kill somebody...
I belong to the group that uses firearms, and knows which bathroom to use.
Tis better to have Trolled & lost, Than to never have Trolled, at all.
Secret Club Member?.Comment
There are currently 29230 users online. 124 members and 29106 guests.
Most users ever online was 239,041 at 10:39 PM on 02-14-2026.
Comment