Unconfigured Ad Widget

Collapse

Poor Mans Reloading

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • stilly
    I need a LIFE!!
    • Jul 2009
    • 10685

    Originally posted by Kestryll
    Rudely, and I've just had to deal with two other thread in which you insulted other members.

    I've warned you about that more than once, I'm not inclined to do so again.
    You are correct. I have been rude lately. I have issues that are clearly spilled over into my online world from real life.

    I thought that by making something kinda neat and all would take my mind off things but then something happened and I lost about 7 units that I had made and it pissed me off to no end that nowhere was it mentioned that that could have happened. So I have halted things and yeah anyways...

    If you show up to tell me that then I think I will take a few steps back and examine a few things.

    I apologize to everyone in this thread, even Wes for having the dream of getting into reloading for $100.

    Now if you will excuse me. I will crawl back under the rock I was working under and not come out again for a while.
    7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...

    Need GOOD SS pins to clean your brass? Try the new and improved model...



    And remember- 99.9% of the lawyers ruin it for the other .1%...

    Comment

    • wes.crockett
      Member
      • Jun 2014
      • 193

      Originally posted by stilly
      You are correct. I have been rude lately. I have issues that are clearly spilled over into my online world from real life.

      I thought that by making something kinda neat and all would take my mind off things but then something happened and I lost about 7 units that I had made and it pissed me off to no end that nowhere was it mentioned that that could have happened. So I have halted things and yeah anyways...

      If you show up to tell me that then I think I will take a few steps back and examine a few things.

      I apologize to everyone in this thread, even Wes for having the dream of getting into reloading for $100.

      Now if you will excuse me. I will crawl back under the rock I was working under and not come out again for a while.
      Btw, I did get everything for like $30 out of pocket... So I kinda did for ~$100

      Sent from my Pixel XL using Tapatalk

      Comment

      • Kestryll
        Head Janitor
        • Oct 2005
        • 21617

        I've found that a bit of peace and quiet and a decent VSOP Cognac helped when I'm pissed off.

        That and banning random people...
        NRA Benefactor Life Member / CRPA Life Member / SAF Life Member
        Calguns.net, LLC. - Owner.
        The California Rifle & Pistol Assoc. - Director.
        DONATE TO NRA-ILA, CRPA AND CRPAF NOW!
        Opinions posted in this account are my own and unless specifically stated as such are not the approved position of Calguns.net or CRPA.

        Comment

        • wes.crockett
          Member
          • Jun 2014
          • 193

          Originally posted by Kestryll
          I've found that a bit of peace and quiet and a decent VSOP Cognac helped when I'm pissed off.

          That and banning random people...
          You should ban everyone who lives in CA.... Oh wait...

          Sent from my Pixel XL using Tapatalk

          Comment

          • kcheung2
            Veteran Member
            • Aug 2012
            • 4387

            Originally posted by wes.crockett
            You should ban everyone who lives in CA.... Oh wait...

            Sent from my Pixel XL using Tapatalk
            Hey, don't give the legislature any more ideas! They're still in session.
            ---------------------
            "There is no "best." If there was, everyone here would own that one, and no other." - DSB

            Comment

            • someoneeasy
              Senior Member
              • Feb 2011
              • 2372

              Originally posted by CSACANNONEER
              I haven't used a Lee quick trim but, it would work. You would need chamfer and deburring tools that you wouldn't need with a Trim-It with a 3 way cutter.



              Would you be interested in attending a reloading club reloading clinic in Camarillo sometime and showing your product to a group of new reloaders and reloading instructors?
              The lee quick trimmer does all 3, trims, chamfers, and deburrs. I started out with one and it worked fine for me. I eventually got a prep station, but went back to it to process m 300 blackout brass. I put it up into my Lee Classic Turret Press and it speeds up my brass processing. I resize and deprime in one station, let it index to the next with my quick trim and a cordless screw driver, then I rotate it back to the resizing die.

              I only handle the brass once and with two pulls of the handle, I have resized, decapped, trimmed, chamfered, and deburred my brass.

              Comment

              • W.R.Buchanan
                Veteran Member
                • Jan 2008
                • 3412

                Originally posted by CSACANNONEER
                Would you be interested in attending a reloading club reloading clinic in Camarillo sometime and showing your product to a group of new reloaders and reloading instructors?
                I would,,, and you can see one of my tools at the Camarillo Gun Shop as Karl has one in there.

                He has my contract info and Phone # or PM me.

                Randy
                Rule #1 Liberals screw up everything they touch.
                Rule #2 Whatever they accuse you of, they are already doing.
                Rule #3 Liberals lie about anything no matter how insignificant.
                Rule #4 If all else fails, they call you a Racist!

                It's not how well you do what you know how to do,,, It is how well you do what you don't know how to do.
                www.buchananprecisionmachine.com

                Comment

                • CSACANNONEER
                  CGN/CGSSA Contributor - Lifetime
                  CGN Contributor - Lifetime
                  • Dec 2006
                  • 44094

                  Originally posted by someoneeasy
                  The lee quick trimmer does all 3, trims, chamfers, and deburrs. I started out with one and it worked fine for me. I eventually got a prep station, but went back to it to process m 300 blackout brass. I put it up into my Lee Classic Turret Press and it speeds up my brass processing. I resize and deprime in one station, let it index to the next with my quick trim and a cordless screw driver, then I rotate it back to the resizing die.

                  I only handle the brass once and with two pulls of the handle, I have resized, decapped, trimmed, chamfered, and deburred my brass.
                  I stand corrected. Thanks for the education.

                  Originally posted by W.R.Buchanan
                  I would,,, and you can see one of my tools at the Camarillo Gun Shop as Karl has one in there.

                  He has my contract info and Phone # or PM me.

                  Randy
                  Perfect, I have to get up there and pick up a new toy before my 30 days is up. I hope to get up there early next week. I'll be sure to check it out.
                  NRA Certified Pistol, Rifle, Shotgun and Metallic Cartridge Reloading Instructor
                  California DOJ Certified Fingerprint Roller
                  Ventura County approved CCW Instructor
                  Utah CCW Instructor


                  Offering low cost multi state CCW, private basic shooting and reloading classes for calgunners.

                  sigpic
                  CCW SAFE MEMBERSHIPS HERE

                  KM6WLV

                  Comment

                  • readysetgo
                    CGSSA Coordinator
                    • Aug 2011
                    • 8694

                    Originally posted by someoneeasy
                    The lee quick trimmer does all 3, trims, chamfers, and deburrs. I started out with one and it worked fine for me. I eventually got a prep station, but went back to it to process m 300 blackout brass. I put it up into my Lee Classic Turret Press and it speeds up my brass processing. I resize and deprime in one station, let it index to the next with my quick trim and a cordless screw driver, then I rotate it back to the resizing die.

                    I only handle the brass once and with two pulls of the handle, I have resized, decapped, trimmed, chamfered, and deburred my brass.
                    From your experience, would the manual version be too awkward to use with the hand press?

                    Close the press, hold the press, mash on the trimmer. Does the trimmer require downward pressure in addition to the revolutions?

                    Or maybe you've only used the powered version?
                    Stand up and be counted, or lay down and be mounted... -Mac

                    Comment

                    • someoneeasy
                      Senior Member
                      • Feb 2011
                      • 2372

                      Originally posted by readysetgo
                      From your experience, would the manual version be too awkward to use with the hand press?

                      Close the press, hold the press, mash on the trimmer. Does the trimmer require downward pressure in addition to the revolutions?

                      Or maybe you've only used the powered version?
                      I've used both and they do require some downward pressure. There are two spring loaded blades that are used to debur and chamber that will require some pressure.

                      Before they came out with the adapter, I had the manual version. It was fine if I was only doing a few at a time, but if I was processing larger quantities, it got old pretty fast. I ended up buying a DC motor and coupler off of ebay and was able to enjoy a powered version.

                      Eventually I bought the Franford Arsenal prep station so I could prep away from my press, but when I started loading 300 Blackout, the brass was too short so I went back to the Lee quick trim.

                      When I went to order the 300 blackout die, I saw that LEE came out with the adapter for the cutting head so I ordered one of those along with an electric screwdriver. I like it, definitely helps cut down on my processing time.

                      If you're only processing small batches of brass at a time, the manual will probably be ok for you, but if you're doing more, the powered version would be the way to go.
                      Last edited by someoneeasy; 04-06-2017, 12:03 PM.

                      Comment

                      • dwightlooi
                        Member
                        • Mar 2007
                        • 460

                        Not everyone wants or have the room for a reloading bench! So, if you want a setup that fits in a shoe box, go get the following:-

                        Lee Handpress Kit (This will load and prime, comes with lube and funnel too) -- $50

                        Lee 3-die set with shell holder (for your caliber) -- $40

                        You can get a powder scale and powder drop for maybe $100, but IMHO just get a Lyman Gen 6 electronic dispenser for $200. Trust me on this, it is fast, it is super accurate and you can become an avid reloader with thousands of dollars worth of gear and you'll still use it!

                        So really, it costs $200 to $300 to get started. I'll vote for the $300 option.

                        Here's a little secret... you really don't need a tumbler, ultra sonic cleaner or whatever to start. If you don't have gear to clean your brass, well just don't clean it! I have fired a case, raked the bolt immediately size/deprime it, pop a primer home, pour powder in it, ram a bullet home and shot it immediately without ever cleaning the case. It'll shoot fine and it wouldn't even affect the accuracy tangibly. If you are shooting a 308 or 223 or something else that is not super hot, you don't have to worry about measuring or trimming the case or whatever else for at least 5 reuses of that brass, so just do it five times and move on to new brass and don't sweat the extra effort and gear!

                        Don't bother with a reloading manual! Just go to the powder manufacturer's website and there will be all the load data you need.

                        Buy your first jar of powder locally. Why? because you probably won't want to pick up a big 8 pound can and if you buy the 1 pound jars the Hazmat fee of getting it online can be more than the powder is worth. So just buy it locally. That way you are free to buy a few kinds of powder and bullets to play with.
                        Last edited by dwightlooi; 04-14-2017, 7:25 PM.

                        Comment

                        • tonyjr
                          Senior Member
                          • Nov 2015
                          • 1448

                          dwightlooi
                          mostly agree with you , except about the reloading manual .
                          While you can find everything on the net - it is easier to relook up something in a book .
                          I agree you don't really need tumbler/ sonic cleaner / vibrator - you can wipe down outside of case and use a barrow brush for inside- I did it for a couple of years with the Lee hand loader
                          life member - CRPA and NRA
                          All ways listen - after you can say I new that

                          Comment

                          • AandO
                            Member
                            • Nov 2014
                            • 449

                            When you excel in getting your cost to the absolute minimum you will continue looking for other ways to reduce even further.
                            .
                            Then it dawns on you that you can cast your own bullets and shoot forever, even as Kalifornia does their UNCONSTITUTIONAL BS . . . . . . .
                            .
                            If you already do cast or if you load your own shells I've got some more reclaimed shot with antimony in it available here on CG.

                            Found here: http://www.calguns.net/calgunforum/s....php?t=1218081

                            Comment

                            • tonyjr
                              Senior Member
                              • Nov 2015
                              • 1448

                              For me , I started to have better control . Different loads for long distance , wind rain , leaves . Then I got more guns .Since starting Ammo was hard to find 4 times [ months ] and about 10 years ago my nephews got into it . Now it is 6 nephews , 2 nieces and me .
                              With the exception of the 308 / 762 , I have everything except the bullets .
                              Other than shooting when you want to , it is cheaper to just buy cartridges .
                              You won't save money , but you will shoot more
                              life member - CRPA and NRA
                              All ways listen - after you can say I new that

                              Comment

                              • dwightlooi
                                Member
                                • Mar 2007
                                • 460

                                Originally posted by tonyjr
                                dwightlooi
                                mostly agree with you , except about the reloading manual .
                                While you can find everything on the net - it is easier to relook up something in a book .
                                I agree you don't really need tumbler/ sonic cleaner / vibrator - you can wipe down outside of case and use a barrow brush for inside- I did it for a couple of years with the Lee hand loader
                                LOL! I go to the web page on my laptop @ home and from my phone @ at the range.

                                Speaking of the Lee Handpress, I really wish more manufacturers will make portable presses that take standard dies so we have some competition and choices out there. Right now, it's Lee or nothing if you shoot a semi and cannot simply neck size with an Arbor type press. Lee is not without its shortcomings... good luck using a RCBS competition die with the side window for the bullet unless you have three hands.

                                Comment

                                Working...
                                UA-8071174-1