Tweet
Anyone have an issue with their case feeder just stop working on their xl650 ? Any fix other than buying a new one ? Mine is not even a year and a half old yet 
-
"I will not buy ammo from the private ammo sellers,it only encourages them to keep buying ,and reselling the ammo they bought from WAL-MART at 2-3 times what they bought it for"! -
I'll be quick as I have a club picnic tomorrow...but it is the motor or is it just the clutch that is slipping.
Check the clutch, which is the 2 set screws, they tighten/loosen the plate assembly to allow it to slip. If it is set too lite, it will not rotate, slipping. This is by design so that it will not burn out your motor.
You can try taking all the cases out of the feeder and see if it spins, if it does, then it's your clutch. If the motor is not working, you should call Dillon, they will replace it for you...another reason to buy Dillon, the no BS warranty! You don't get that with Hornady! (threw that in for stilly!
)
sigpic--------- liber --------
From my cold dead end mill...
-
Check the shutoff switch in the drop tube. Sometimes it sticks.
Dillon only warranties electronic components for a year.Oppressors can tyrannize only when they achieve a standing army, an enslaved press, and a disarmed populace. -- James Madison
The Constitution shall never be construed to authorize Congress to prevent the people of the United States, who are peaceable citizens, from keeping their own arms. -- Samuel Adams, Debates and Proceedings in the Convention of the Commonwealth of Massachusetts, 86-87 (Pearce and Hale, eds., Boston, 1850)Comment
-
thanks guys,but I checked all the usual issues. took it off the loader dumped all the shells ,and took the shell plate out ,wiggle the shut off switch,and no action. I guess the motor burnt up .
Thanks for the reply's anyway."I will not buy ammo from the private ammo sellers,it only encourages them to keep buying ,and reselling the ammo they bought from WAL-MART at 2-3 times what they bought it for"!Comment
-
Thats an induction motor that should never burn out.
Bypass the white case switch and test. If that "cherry" micro switch is broken, I can send you one. Ive got a big 'ol bag of those.Comment
-
lol I figured I would do just that . It was not working so what's there to lose I thought . I was thinking it shouldn't be the motor either , and it wasn't. took it a part ,motor works fine , but one of the switches didn't , not sure which it was ,but I put it back together ,and it started to work again. Like you mentioned it could be that micro switch lol. I doubt the power switch is bad.
Thank you for the offer. very kind of you.Last edited by Dragon; 08-02-2015, 3:59 AM."I will not buy ammo from the private ammo sellers,it only encourages them to keep buying ,and reselling the ammo they bought from WAL-MART at 2-3 times what they bought it for"!Comment
-
7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...
Need GOOD SS pins to clean your brass? Try the new and improved model...
And remember- 99.9% of the lawyers ruin it for the other .1%...Comment
-
Mine went out earlier this year too. They didn't replace it because of the 1 year warranty on electronics. It's a shame, it was the only part I've broken on my press and they didn't warranty it. Just my luck.Comment
-
To be fair the only part that is only covered for a year is the motor. They're pretty cheap to replace.Oppressors can tyrannize only when they achieve a standing army, an enslaved press, and a disarmed populace. -- James Madison
The Constitution shall never be construed to authorize Congress to prevent the people of the United States, who are peaceable citizens, from keeping their own arms. -- Samuel Adams, Debates and Proceedings in the Convention of the Commonwealth of Massachusetts, 86-87 (Pearce and Hale, eds., Boston, 1850)Comment
-
I think all theses parts can be found at Grainger.. I believe I found they have the micro switch."I will not buy ammo from the private ammo sellers,it only encourages them to keep buying ,and reselling the ammo they bought from WAL-MART at 2-3 times what they bought it for"!Comment
-
Make sure its the "Cherry" one. Those are very light switches. Most micro switches cannot be switched with just the weight of the case.Comment
-
I had a few problems with my micro switch, so today while placing an order I had them warranty me a couple. Funny thing is a case feeder doesn't even show on my order history.
When I bought it, I added it to my buddys order to save shipping. I didn't have to explain that to them. I just asked for it and they are sending it/ (no BS confirmed once again)
On my last order I busted a pistol decapping pin. they sent me 20 pistol decapping pins under warranty.
I have never had any problem getting a part from Dillon under warranty. Even if it's my fault.Comment
There are currently 10724 users online. 91 members and 10633 guests.
Most users ever online was 239,041 at 10:39 PM on 02-14-2026.
Comment