Unconfigured Ad Widget

Collapse

Anyone got TWO beeps on turning computer on with certain RAM?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    stilly
    I need a LIFE!!
    • Jul 2009
    • 10685

    Originally posted by OutlawStar
    http://www.computerhope.com/beep.htm

    Parity circuit error. Your RAM is your problem. Take out the old stuff and see if the error code persists.
    I did not know I had parity RAM/ECC RAM. I am running a desktop, not a server...

    I am 99% certain that with only ONE set of RAM the beep will not be present. The second beep does not seem to be part of the normal POST. It just sounds- OFF by a hair. I would probably even have this problem if I ran another set of 4GB Gskill gold.

    I think that if I could figure out the channel interleave that would solve the problem, but in doing that I already hung the system and I am not thrilled about having to yank out the graphics card every time I need to reset the CMOS.

    I will look and see if I can move it over so it is not over the clear cmos jumper...


    And ANOTHER thing, I am DONE with this ****ing keyboard! I swear it drops the Ts and makes my typing look like some idiot tried to bang it out in the dark...

    It is almost as if there is a delay at times and it will not be able to keep up with the amount of typing or the speed or something, but it will just pause for a moment and if it is NOT the keyboard then it has to be the KVM, which I am also not very fond of since it sucks.
    Last edited by stilly; 09-08-2016, 7:22 PM.
    7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...

    Need GOOD SS pins to clean your brass? Try the new and improved model...



    And remember- 99.9% of the lawyers ruin it for the other .1%...

    Comment

    Working...
    UA-8071174-1