ROHGARMS PRODUCT REVIEW

[ARBuilder]

Yes, it is my first post. Like i said, Im not here to debate whos right and whos wrong, I was just talking about my experience with Rohg. I didn't bash your mishaps either. as a gun owner of over 20yrs, things can happen with even the best name brand firearms. I just think you should try to duplicate the problem. If it does happen again, then please post it, and take it intact to Rohg so they can help solve the problem. Remember the firearm community is like a brotherhood, we need to learn from one another and grow with one another. Vendor and shooter alike

[ImpaktechUSA]

Yes, it is my first post. Like i said, Im not here to debate whos right and whos wrong, I was just talking about my experience with Rohg. I didn't bash your mishaps either. as a gun owner of over 20yrs, things can happen with even the best name brand firearms. I just think you should try to duplicate the problem. If it does happen again, then please post it, and take it intact to Rohg so they can help solve the problem. Remember the firearm community is like a brotherhood, we need to learn from one another and grow with one another. Vendor and shooter alike

thats because i DIDNT DO ANY MISHAP! .. you must think im an idiot if you truely want me to believe you are that customer i met that day.. .. Things happen i understand .. ALL i wanted was my money back .. plain and simple.. i very well could have been the needle in the haystack .. but guess what.. you dont buy parts end up not liking them because they are CHEAP and fail to get replaced with more parts you dont trust and dont want to own anymore its that simple... but the owner ABSOLUTELY wanted to keep my 800$.. so this wil be his lesson.. that the 800$ he should have given back which would have sent me on my merry way would have saved him from the thousands he will now lose because i simply TOLD THE TRUTH about my experience

[c-wick]

Yes, it is my first post. Like i said, Im not here to debate whos right and whos wrong, I was just talking about my experience with Rohg. I didn't bash your mishaps either. as a gun owner of over 20yrs, things can happen with even the best name brand firearms. I just think you should try to duplicate the problem. If it does happen again, then please post it, and take it intact to Rohg so they can help solve the problem. Remember the firearm community is like a brotherhood, we need to learn from one another and grow with one another. Vendor and shooter alike

Try to duplicate the potentially dangerous and unsafe malfunction again with the same parts? Are you f'n nuts???

[jvh22a]

Im just saying maybe you purchased a needle in a hay stack, .

i just got into Guns about 2 months ago(give or take). saw Rohg's ad and then saw them at the ontario gun show(first gun show ever) i talked to a lady about the uppers and she was pretty helpful. next to me was an older guy asking about delta rings and some specifics on the uppers. the guy behind the counter seemed kind of a dick with a big ego. now granted i only heard the last part of the conversation. but i just didnt like what i heard and his tone towards a customer asking about his manufacturing etc. even after the guy(customer) left, there was some **** talking.

customer service is key. i didnt buy from them because of what a heard and saw. but if he got a needle in a hay stack. the owner should have given the refund. and i know its hard to give up $800 but its taking care of 1 guy that could bring in 5 more guys to buy parts.

on a side note, though. i would have left the upper assembled and let the shop take it apart. just to show that you didnt do anything wrong with it.

[ImpaktechUSA]

on a side note, though. i would have left the upper assembled and let the shop take it apart. just to show that you didnt do anything wrong with it.

i wanted other opinions from reputable gunsmiths .. that i knew wouldnt blow smoke in my direction .. and believe me i got their opinions instantly and they will chime in on this

[TF_CAM]

notice both of these people have new accounts made today and their only post are in this thread... and they BOTH are the only people that referred to me as Impak ... lol.. mr rohgarms you really are a character

E-SLAM! hahaha.. thanks for the heads up man.. glad i didnt order any barrels or parts for any of my build from this guy..

[ImpaktechUSA]

Try to duplicate the potentially dangerous and unsafe malfunction again with the same parts? Are you f'n nuts???

im glad im not the only person that thinks this

[hombresg33]

vytamenc22 is his screen name, my buddy and I bought uppers from him. Was patience with us, had an issue with a NFA polymer lower. He offered to look at it and replaced the new parts kit provided by NFA for free.

hay op there is a guy on here i cant remember his screen name but i think his name is chad he does alot of work on AR15's. you may want to look him up. somebody help me out with his screen name its been a few years. he polished my feedramps on my 7.62x39 and he installed my handgaurd while i waited for free. i have sent a bunch of friends to him to buy stuff he really does great work

[ARBuilder]

I've been a sniper on this site for a while, and I stumbled apon this post. I read it and new I could give some honest feedback in regrds to your issue and as an individual owning several Rohg uppers. I am the guy you met that day at the shop, you were gonna draw me a map of how to get to your shooting spot, where I can shoot SBRs and use 30rd mags all day is what you told me. So try to be aliitle more honest on this board when you go saying "that's illegal ". In regards to trying to duplicate the problem, I said take it out and shhor it because I think "upper left in factory specs " you can't. I also know that pistol uppers have a reputation if a cycling issue and gas. Sometimes the gas port needs to be opened "so minutely " to get it to cycle right, that's why the noveske pig was designed, to increase back pressure and improve cycling. Now before you go getting worked up, I'm not saying you did this, but I know guys that have tried opening the tolerance on there gas ports and have had similar experiences. No holes blowing out of the gas block, but burned and malfunctioning ports, similar to your picture. I'm actually extremely curious on how the new upper shoot,because like I said, I own four of there uppers. If I remember right, you said you shoot off cajalco. Lets meet up and test this new upper, ill bring my four and we'll pump some rounds through them, Im looking for a new shooting spot anyway.

[Cerberus]

hmm, all of this makes me want to tear down the upper I bought and check out the parts.
Impact, what caused the pitting in the barrel gas port??

[SNCaliber]

wow two posts made by obvious new accounts..just wow..

[ImpaktechUSA]

hmm, all of this makes me want to tear down the upper I bought and check out the parts.
Impact, what caused the pitting in the barrel gas port??

from what other gunsmiths have told me... its a cheap chinese barrel .. i know i put no more than 50 rounds through that barrel and thats what happened...... ROHGARMS wanted to put a new gas block on that barrel and have me go test it again.. .. .. now thats a joke

[ImpaktechUSA]

I've been a sniper on this site for a while, and I stumbled apon this post. I read it and new I could give some honest feedback in regrds to your issue and as an individual owning several Rohg uppers. I am the guy you met that day at the shop, you were gonna draw me a map of how to get to your shooting spot, where I can shoot SBRs and use 30rd mags all day is what you told me. So try to be aliitle more honest on this board when you go saying "that's illegal ". In regards to trying to duplicate the problem, I said take it out and shhor it because I think "upper left in factory specs " you can't. I also know that pistol uppers have a reputation if a cycling issue and gas. Sometimes the gas port needs to be opened "so minutely " to get it to cycle right, that's why the noveske pig was designed, to increase back pressure and improve cycling. Now before you go getting worked up, I'm not saying you did this, but I know guys that have tried opening the tolerance on there gas ports and have had similar experiences. No holes blowing out of the gas block, but burned and malfunctioning ports, similar to your picture. I'm actually extremely curious on how the new upper shoot,because like I said, I own four of there uppers. If I remember right, you said you shoot off cajalco. Lets meet up and test this new upper, ill bring my four and we'll pump some rounds through them, Im looking for a new shooting spot anyway.

first of all .. i still dont believe you are that customer.. because that customer would not give crap about defending your business.. you fail to realize your typing sounds just the way you speak .. and the grammar reflects that . so either this is JOE or this is your helper who is the guy thats does all the internet stuff for you .. and your just making yourself look even worse

[ImpaktechUSA]

wow two posts made by obvious new accounts..just wow..

yeah .. and the grammar and punctuation sounds just like the guy lol .. and really thinks i dont know

[Citadelgrad87]

from what other gunsmiths have told me... its a cheap chinese barrel .. i know i put no more than 50 rounds through that barrel and thats what happened...... ROHGARMS wanted to put a new gas block on that barrel and have me go test it again.. .. .. now thats a joke

How is it that I have seen several instances of Beta Mag dumps in FA, leaving the gas tube literally glowing, and there was no issue at all, and somehow "experts" are saying this guy wrecked his own rifle by simply shooting it? We are talking about the civilian version of the present day service rifle, not a china tea set. Semi is not going to duplicate the rigors of FA, it simply is not, bump fire or no. The M4 platform is designed to fire 700 rounds per minute, that's well over 10 per second, bump fire is nowhere near that. Frankly, if this was indeed "milspec", it would not have failed even after protracted full auto mag dumps.

As far as i am concerned, the vendor ought to be embarassed that this happened."Experts" chiming in that maybe this was from bump firing ought to get a clue about the platform before speculating that this was a result of misuse.