Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
Complete garbage guns
Collapse
X
-
DOES PEPPER SPRAY WORK? AFTER REPEATED POINT BLANK SHOTS TO THE FACE...OVER A SIMPLE WORKPLACE DISAGREEMENT??? you decide, and you will laught, too
https://www.youtube.com/watch?v=kn9YdML8PPw -
i dont have a {POS} gun because if i buy something, it's to keep not to sell. but to really say CA already has all the POS guns. CA is going to be like some other county outside the US that will very soon and super fast to have out date guns and the free state will keep moving forward without look back at CA. CA soon won't be a part of US on firearms. these POS guns will be like the ww1 ww2 guns.Here's everyone's favorite thread.
Honestly in my years of shooting and opening various brands and models of firearms, none have stuck me as being complete and utter POS guns. Sure some have had teething problems (magazine related usually), occasionally parts have decided to launch at the range (sights, extractors usually), but none that were just void of redeeming features.
I have to say that must firearms are like most California wines, most are ok, several are exceptional and the terrible ones are all well known (Vulcan, hesse, blackthorn).
That said, anyone agree or disagree? Had yourself a complete and utter POS you feel the need to call out? Do it.
DanComment
-
I've had one and handled another I would consider almost junk.
My father had a Jennings (?) 25 ACP that was basically worthless. He didn't have it long.
I got a Norinco 22 semiauto, the one that's a clone of the Browning autoloader. It was actually sort of OK but the internal parts were not made well at all and it was (1) prone to malfunction if not kept spotlessly clean and (2) a total PITA to strip and reassemble due to the design itself and the poor finish and tolerances of the internal parts. I can't call it complete junk because when clean and assembled, it shot great.
But it was close.
Other than those I've been around guns of various states of wear and quality of manufacture but they all tend to be a well tested and fairly proven bit of industrial technology despite their obvious differences of quality and beauty.Comment
-
Smith & Wesson 916a shotgun. Trigger housing is made of potmetal and is what the buttstock bolts into. One little bump of the stock and you break the trigger housing. Can't find replacement parts because they've all been broken.Do not try and bend the spoon, that's impossible. Instead, only try to realize the truth...there is no spoon.Comment
-
Rem710 and its replacement 770(?)A 30cal will reach out and touch them. A 50cal will kick their butt.
NRA Life Member, NRA certified RSO & Basic Pistol Instructor, Hunter, shooter, reloader
SCI, Manteca Sportsmen Club, Coalinga Rifle Club, Escalon Sportsmans Club, Waterford Sportsman Club & NAHA Member, Madison Society memberComment
-
-
The fabled 700, SPS tactical, my friend had one. Rough action, crappy trigger, free floating barrel not actually free floating (stock touching), slightest moisture and the finish rusted on the barrel. It was a piece of junk!Any actual experience with these guns or just repeating the internet? I'd be particularly interested in first hand experience with the R51 and RP9.
I've personally got a Remington R1 Enhanced 1911 in 9mm that runs like a champ after the initial teething. This one shipped with a poor extractor (known issue in 9mm models), once I changed it out for a Wilson Combat extractor, it's been 100%. Although I am still disappointed that Remington couldn't be bothered to use a good 9mm extractor in a 9mm 1911 instead of whatever these guns ship within.
Dan
Plus, everything the internet says...military arms channel on YouTube showed what junk the pistols are.Comment
-
Comment
-
+1 on the Grendel.I have been collecting for at least 3 decades and i have a few guns and rifles. There are two that did not survive.
One was the first gun I ever purchased, a Grendal .380. It was an ok gun, until I tried a deep cleaning and took it apart past a normal field strip. Springs flew and could not get replacements parts, I forgot why.
Next was an Astra A-80 .45 caliber. Its a copy of the old sig sauers and was actually a good shooter! I liked the trigger on it and I shot great groups. Well, at the time the (ex spouse) worked at the gun range and I think she and her buddies there put some hot load through the gun. The front of the slide started to crack and separate at the weak points.
So, really the problems with them are operator errors and kind of make them not such POS's. They just had bad luck and didn't get to stay in the gun cabinet for very long.
Mine just stopped working (a P10) about 6 months in and no one could fix it... You probably couldn't get parts 'cuz the company closed its doors...and re-emerged as Kel Tec.
And thats the rest of the story...
I'll go back to lurking now.
Sent from my SM-G860P using TapatalkComment
-
Have you tried contacting Keltec to see if they could work on it or provide parts?+1 on the Grendel.
Mine just stopped working (a P10) about 6 months in and no one could fix it... You probably couldn't get parts 'cuz the company closed its doors...and re-emerged as Kel Tec.
And thats the rest of the story...
I'll go back to lurking now.
Sent from my SM-G860P using Tapatalk
DanOriginally posted by bigmike82That doesn't matter.
If you believe in Liberty, you should believe it for everyone, not simply those whom you agree with.Comment
-
Well, sorta...years ago my buddy would get me into SHOT. I asked a guy working their table if they could/would do anything and got a "sorry, nope". This was probably within 1-2 years of the switch over.
Kinda sucks, I've been eying their carbine but fool me once...
Sent from my SM-G860P using TapatalkComment
-
Well, sorta...years ago my buddy would get me into SHOT. I asked a guy working their table if they could/would do anything and got a "sorry, nope". This was probably within 1-2 years of the switch over.
Kinda sucks, I've been eying their carbine but fool me once...
Sent from my SM-G860P using Tapatalk
For all the stuff that's on the net about Keltec, I'll admit mine have been relatively trouble free. The sub2000 (S&W mag) ran well and was accurate, it just didn't shoulder right for me. The su16s have been pretty good to me. Heck, even ran one at a USPSA match once for fun. No hiccups that weren't mag related (promag... Say no more) and ran the whole match without issues (when I used cproduct, colt and Magpul).
If the carbine would be a good fit for you, I'd say go for it. Keltec has been pretty good about RMA stuff from what I've read.
DanOriginally posted by bigmike82That doesn't matter.
If you believe in Liberty, you should believe it for everyone, not simply those whom you agree with.Comment
-
So.... No first hand experience with the R51 or RP9 or any other Remington product. Check.The fabled 700, SPS tactical, my friend had one. Rough action, crappy trigger, free floating barrel not actually free floating (stock touching), slightest moisture and the finish rusted on the barrel. It was a piece of junk!
Plus, everything the internet says...military arms channel on YouTube showed what junk the pistols are.
Anyone have first hand experience with the newer version of the R51 (after the fiasco) or the RP9?
DanOriginally posted by bigmike82That doesn't matter.
If you believe in Liberty, you should believe it for everyone, not simply those whom you agree with.Comment
Calguns.net Statistics
Collapse
Topics: 1,870,971
Posts: 25,178,132
Members: 358,862
Active Members: 5,382
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 33443 users online. 21 members and 33422 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Had to send it off to get fixed.
Comment