Unconfigured Ad Widget

Collapse

Cleaning a pump

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    SPaikmos
    Member
    • Dec 2009
    • 315

    Originally posted by Capt. Speirs
    How do you wipe down Parkerized Shotguns, without making 'em shinny?
    I was told that when you first get the gun, you should rub oil into the finish every day for a week or so. The finish absorbs the oil, and really protects it from rusting.

    I also take the barrel off and alternate between a copper brush and patches. Sometimes the residue really gets caked into there, and the patches will come out "clean" until I use the brush to loosen the crap off again.

    Comment

    • #17
      ilikeguns
      Senior Member
      • Aug 2009
      • 782

      If I decide to clean the 870, it is brief. Take off barrel, boresnake twice, wipe down gun. Less than 2 minutes. Thats what I like about it.
      AR15...thats another story.

      Comment

      • #18
        Rigma
        Senior Member
        • Mar 2009
        • 988

        Originally posted by teflondog
        I run a boresnake through mine at the end of my range session without removing the barrel. When I do a more throrough cleaning I'll strip it all the way down to clean/lube the parts, but that only happens once or twice a year. I haven't found the need to clean my 870 very often. Even after 500 rounds there is barely any dirt inside.
        Agreed. Found that getting "OCD" on an 870 is a complete waste of time and unrewarding to the compulsion.

        "Thats it!? Surely there must be more in there somewhere?"
        I don't know how political I am, I don't get into all that crap....I just love freedom...
        -Kaziah Hancock

        Comment

        • #19
          SubieRX
          Member
          • Mar 2010
          • 216

          I just recently purchased a bore snake for my shotgun and I've cleaned the gun with it a few times already. When do you guys actually clean the bore snake... and how do you all go about it? Do you just rinse it in the sink and then hang it up to dry?

          Comment

          • #20
            RaymondMillbrae
            Veteran Member
            • Jun 2009
            • 2659

            What?

            No mention of plastic fowling in the barrel by anyone?

            WOW!!!

            Check out the below video, and pay attention to the steps in removing THE PLASTIC FOWLING. (You can do it his way, or any other number of ways...but it needs to be done).

            CLEANING A SHOTGUN BARREL

            If you are shooting trap loads, target loads, or wadded slug loads...you need to clean the plastic fowling from the wads.

            If you ONLY shoot wadless slugs, then that may be a different story.

            Shoot (and clean) with a purpose.

            In Christ: Raymond
            Some of my tutorials:

            RELOADING .223 VIDEO
            HOME MADE RECOIL SPRING TESTER
            SHORTENING THE LOP ON AN FN SLP SHOTGUN
            INSTALLING SIGHTS ONTO A REMMY 870P
            HORNADY 366 AUTO - INTRO OF PRESS & SLUG COMPONENTS (Part 1)
            HORNADY 366 AUTO - PROGRESSIVE RELOADING OF LYMAN SABOT SLUGS (Part 2)

            Comment

            • #21
              bigwhitetruck
              Senior Member
              • Nov 2009
              • 628

              Originally posted by SubieRX
              I just recently purchased a bore snake for my shotgun and I've cleaned the gun with it a few times already. When do you guys actually clean the bore snake... and how do you all go about it? Do you just rinse it in the sink and then hang it up to dry?
              You can do that, but they are also machine washable.
              sigpic

              "Wars may be fought with weapons, but they are won by men." - General George S. Patton Jr.

              Feedback: https://www.calguns.net/calgunforum/....php?t=1890506

              Comment

              • #22
                XDseb
                Member
                • Feb 2010
                • 246

                I usually spray some Break Free CLP down the inside of the barrel, bore snake it a couple of times, run a rag through the receiver, spray the exterior with Remoil and wipe it down. This is my regular cleaning, every 4 or 5 cleanings I go a little more in depth and remove the barrel.
                Roads? Where we're going...we don't need roads

                Comment

                • #23
                  Once A Marine
                  Senior Member
                  • Jun 2009
                  • 1165

                  Sorry, I cannot pass this up!

                  Originally posted by RaymondMillbrae
                  What?

                  No mention of plastic fowling in the barrel by anyone?
                  How'd you get a plastic duck in your barrel?!

                  NRA Endowment Member
                  NRA Certified Pistol, Personal Protection,
                  Refuse To Be A Victim Instructor
                  Glock Certified Armorer

                  Comment

                  • #24
                  • #25
                    supersteve9219
                    Member
                    • Nov 2009
                    • 368

                    It's a pump, not a precision rifle...

                    there is no rifling or any other fine stuff that could be messed up or needs close attention.

                    Just run a swab with cleaner through it, and every once and a while run a brush (like 1000 rounds or so).

                    Really all you have to do is oil it, I only clean mine about every 500 rounds or so.

                    Comment

                    • #26
                      RaymondMillbrae
                      Veteran Member
                      • Jun 2009
                      • 2659

                      No rifling?

                      My Remmy 870P happens to be a smoothbore. But there are PLENTY of shotty's out there that use rifled bores for hunting...as per state requirements.

                      In Christ: Raymond
                      Some of my tutorials:

                      RELOADING .223 VIDEO
                      HOME MADE RECOIL SPRING TESTER
                      SHORTENING THE LOP ON AN FN SLP SHOTGUN
                      INSTALLING SIGHTS ONTO A REMMY 870P
                      HORNADY 366 AUTO - INTRO OF PRESS & SLUG COMPONENTS (Part 1)
                      HORNADY 366 AUTO - PROGRESSIVE RELOADING OF LYMAN SABOT SLUGS (Part 2)

                      Comment

                      • #27
                        supersteve9219
                        Member
                        • Nov 2009
                        • 368

                        Originally posted by RaymondMillbrae
                        No rifling?

                        My Remmy 870P happens to be a smoothbore. But there are PLENTY of shotty's out there that use rifled bores for hunting...as per state requirements.

                        In Christ: Raymond
                        He was looking for a HD and skeet shotgun a few weeks ago, I doubt he bought a rifled shotgun.

                        Comment

                        • #28
                        • #29
                          karl9422
                          Member
                          • Jan 2010
                          • 445

                          i have yet to clean one of my shot guns. i put 2000 rounds threw my interstate 982 only oiling it a little on the bolt and running a bore snake down it like twice. i know the saiga is not a pump but i have not even cleaned it after 500 rounds and no problems from it and it has alot more that can go wrong being a semi auto. the only down part to not cleaning is it still smells like gum powder when you open the case the next time.

                          Comment

                          • #30
                            TERRYGER
                            Member
                            • Dec 2009
                            • 357

                            Originally posted by RaymondMillbrae
                            No rifling?

                            My Remmy 870P happens to be a smoothbore. But there are PLENTY of shotty's out there that use rifled bores for hunting...as per state requirements.

                            In Christ: Raymond
                            i like ya raymond but i can't stand the word "shotty"! who taught you this

                            the amount of rifled slug barrels on shotguns in the u.s. is miniscule comapred to smooth bores and the amount in cal can be hidden in a gnat's armpit.

                            i will say if you have a rifled slug barrel and have ever fired more than 25 rounds(doubtful) through it, by all means clean it like a rifle.

                            otherwise, minimal cleaning is required on any smooth bore unless it is a high dollar comp gun and even then minimal is still most all that is required.

                            Comment

                            Working...
                            UA-8071174-1