Cheapest 10/22 trigger mod?

[Jeepers]

This.

There are very good instructions on stoning your own trigger on rimfire central.

It takes about 5 minutes.

A no-brainer.

weapons guild has a how to do the trigger mods to make the stock parts work with a tension spring also.. saved as a pdf to try some day i am still running the stock return spering myself

[SB1964]

My 1999 10/22 aluminum receiver has steel internals. I put a Volquartsen hammer & sear in it & the trigger take up, or "creep" was incredibly sloppy. I'll admit it was much lighter & had a crisp release, just felt like a 2 stage trigger. I decided to send it to Randy at CPC & I've never looked back. I also had my bolt jeweled & more importantly, the headspace reground. 10/22's get their headspace from the bolt specs. Fast turnaround & high quality work, very reasonable price. I have not had a single failure to anything in several thousand rounds. Please do NOT do your own trigger work.

[-hanko]

Not all gun owners know the relationship between all the parts and what they do. For this reason and for my safety on the range I say sent it to Brimstone. Sanding here, filing this, do you think you took off .002 0r .020? You can make a bad situation very quickly.

Common sense says if you don't know .002 from .020, you don't screw with it.

If you don't want to spend the time to know the relationship between parts, buy parts or send your parts out.

Simple.

[bohoki]

yea i stoned my hammer before i could pick the gun up my the trigger and it would not go off now its just right

[Garand1911]

polish the hammer.
My brother did one, then compared to the VQ hammer ...his was BETTER !!

Worst case scenario you phluck it up and go buy a Kidd hammer.
Kidd > VQ

[Coyotegunner]

After cruising rimfire forum's.I keep coming up with
Brimstone
Swampfox

I have done some of my own,used VQ completes, and used Kidd parts on others.

If a person is not into learning this or is without tools.
Drop in parts are best or a knowledgable person.A complete is expensive but works well.
I have had mixed success with just a hammer alone.
I know of Brimstone as good work.

Please someone:Have you used the Swampfox guy?
He wants $45 plus shipping for a basic 2-3 pound clean trigger job on your lower.One of the rimfire sights rated his stuff as good as Brimstone.
I have a new magnum out there now and before I waste money on parts,I want to try this guy.