Unconfigured Ad Widget

Collapse

Ruger 10/22 trigger

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    Fish-n-Shoot
    Senior Member
    • Feb 2011
    • 531

    Forgot to add that he does more than he shows. He states that he doesn't show everything so as not to lose business. Obviously he does something extra that does the big changes to the trigger pull. My brother knows quite a bit about guns and gunsmithing so i'm taking it to him in a few days to take a look and make some suggestions. I'm sure i'll get somethin done. If not then last resort is volquartsen hammer. not too expensive.
    Some Of My Knives for sale at AZCK, a dealer:
    http://www.arizonacustomknives.com/p...ersFilter=4732

    If you'd like to be added to the PM list for when new knives become available for sale on Calguns, please PM me with a request.

    Comment

    • #17
      Gem1950
      Veteran Member
      • Jun 2008
      • 2876

      Originally posted by Fish-n-Shoot
      Forgot to add that he does more than he shows. He states that he doesn't show everything so as not to lose business. Obviously he does something extra that does the big changes to the trigger pull. My brother knows quite a bit about guns and gunsmithing so i'm taking it to him in a few days to take a look and make some suggestions. I'm sure i'll get somethin done. If not then last resort is volquartsen hammer. not too expensive.
      It helps to install an over-travel stop screw in the trigger. I also polish the end of the hammer spring post. Hammer and sear bushings help a little. You can also fix the radius on the bolt where it contacts the hammer (although this has nothing to do with trigger pull). In the end there is only so much one can do with the factory parts before you go to the next level and buy the custom aftermarket parts.
      "To argue with a person who has renounced the use of reason is like administering medicine to the dead." Thomas Paine



      "We keep you alive to serve this ship. Row well and live."

      "Is that a desert country?" "No; a fat country; fat people." "You are not fat?" "No. I'm different..."

      Comment

      • #18
        Fish-n-Shoot
        Senior Member
        • Feb 2011
        • 531

        Originally posted by Gem1950
        In the end there is only so much one can do with the factory parts before you go to the next level and buy the custom aftermarket parts.
        Well aint that a kick in the groin should harldy waste my time then lol. Volquartsen here i come. Already got 800 into the 10/22, what's another 200 gonna do....
        Some Of My Knives for sale at AZCK, a dealer:
        http://www.arizonacustomknives.com/p...ersFilter=4732

        If you'd like to be added to the PM list for when new knives become available for sale on Calguns, please PM me with a request.

        Comment

        • #19
          Kryptyde
          Member
          • Feb 2011
          • 109

          Originally posted by Fish-n-Shoot
          Well aint that a kick in the groin should harldy waste my time then lol. Volquartsen here i come. Already got 800 into the 10/22, what's another 200 gonna do....
          VQ are decent...but do yourself a favor and get a KID. It is vastly superior and generally considered the best trigger you can find for a 10/22. The real 10/22 experts on rimfirecentral all agree. I bought my two stage KID trigger on their recommenation and it is an absolute joy to shoot.

          Comment

          • #20
            chickenfried
            Calguns Addict
            • Oct 2005
            • 7160

            We're thread drifting but I agree if you want the best kid's the one. But IMO it's not $300 better than a modded 10/22 trigger.

            Better than owning a kid. Beating your friend that upped the 10/22 arms race between you and installed the kid . I looked over at his bench and spotted the telltale red trigger. The shock and awe almost got to me.
            Last edited by chickenfried; 04-12-2011, 12:16 PM.
            Originally posted by victor1echo
            Hollywood is satan!!!!
            sigpic

            Comment

            • #21
              XDRoX
              Veteran Member
              • Mar 2009
              • 4420

              Very doable to do a trigger job yourself with a little patience. Here are some instructions I wrote up a while back. Do these mods and throw in a VQ hammer and you'll have a very nice trigger.

              IMO the 10/22 is an awesome little plinker right out of the box. But for little money you can make some drastic improvements to it making it even more fun to shoot.
              IMO these few mods will make the gun much easier to use and more fun to shoot.

              I'm not a gunsmith so if you attempt to do any of these mods you do so at your own risk.
              Also, I didn't invent any of these mods by any means. Most of these I took from rimfirecentral over the years. I just did these mods tonight on a used 10/22 I picked up few weeks ago for $169. It is a basic carbine 10/22. I think the manufacture date was around 1994.


              There are five mods that will really improve any factory stock 10/22.
              1. Polishing the internals
              2. Modifying the bolt release
              3. Changing the magazine release
              4. Changing the bolt buffer
              5. Changing the extractor

              Polishing
              There are 3 pieces to polish. Polishing these internals will not lighten the trigger pull. The easiest way to lighten a trigger is to buy an aftermarket hammer. I choose not to replace the hammer in this 10/22 because I use it to teach kids to shoot, and don't mind the 8 lb stock trigger.
              On the disconnector I polished one face. The hammer rubs against the disconnector on this face.


              On the hammer I polished one face and the curved end. The flat face is where the hammer makes contact with the bolt and the curved end is where the hammer makes contact with the sear.


              The sear gets polished in 3 places.
              This picture shows where the sear makes contact with the hammer.


              This picture shows where the sear makes contact with the disconnector.
              I polished the following 2 faces.


              That's all for the polishing. These mods will make the trigger much more crisp and reset better as well. The difference is felt immediately.
              Last edited by XDRoX; 04-12-2011, 12:46 PM.
              Chris
              <----Rimfire Addict


              Originally posted by Oceanbob
              Get a DILLON...

              Comment

              • #22
                XDRoX
                Veteran Member
                • Mar 2009
                • 4420

                Bolt Release
                For those of us that have a 10/22, we know that the bolt can be very frustrating to release. For some reason Ruger likes to make you fiddle with a button while pulling on the bolt. This mod makes the rifle act like any other semi-auto rifle, and it is easy to do. You just have to use a dremel to take off some of the material of the bolt release. This picture shows how much you have to take off.
                The factory bolt release is on the right.


                Mag Release
                I don't have huge hands, but I have a very hard time pushing the small mag release button to take out a mag. So I think an extended mag release button is a must on any 10/22. Lots of companies make these, so just pick one that you like, you really can't go wrong.
                The one I installed tonight is made by Butler Creek. I don't know if they still make these (bought this one about 15 years ago) but I like it because it is barely noticeable, but still makes taking the mag out much easier.
                You can see it in this photo:


                Bolt Buffer
                You can also see the bolt buffer that I changed as well. This is basically a piece of rubber that replaces a metal pin. Instead of the bolt slamming against metal it hits rubber. This also makes the gun cycle much quieter. The one in this picture is made my Volquartsen, I'm not sure if they still make these, but a company called Tuffer Buffer makes great ones as well. They cost $7.
                Chris
                <----Rimfire Addict


                Originally posted by Oceanbob
                Get a DILLON...

                Comment

                • #23
                  XDRoX
                  Veteran Member
                  • Mar 2009
                  • 4420

                  Extractor
                  The last thing I like to change is the extractor. This can help with shell extraction, which sometimes 10/22's don't do as well as they should. With this used 10/22 I was getting about 1 stovepipe every 25 rounds or so. In the past when I changed the extractor, this FTE problem was fixed.
                  I use an extractor made by Volquartsen like this one here:

                  It cost $12.

                  That's it. Hope this helps and hope this makes some old 10/22's run better and stronger than ever before.
                  A few more pics.
                  Fully disassembled pieces and my finished product.


                  Last edited by XDRoX; 04-12-2011, 12:45 PM.
                  Chris
                  <----Rimfire Addict


                  Originally posted by Oceanbob
                  Get a DILLON...

                  Comment

                  • #24
                    Fish-n-Shoot
                    Senior Member
                    • Feb 2011
                    • 531

                    Very nice job XDRox. I'm impressed. Clean and understandable unlike most stuff on the internet.
                    Some Of My Knives for sale at AZCK, a dealer:
                    http://www.arizonacustomknives.com/p...ersFilter=4732

                    If you'd like to be added to the PM list for when new knives become available for sale on Calguns, please PM me with a request.

                    Comment

                    • #25
                      XDRoX
                      Veteran Member
                      • Mar 2009
                      • 4420

                      Originally posted by Fish-n-Shoot
                      Very nice job XDRox. I'm impressed. Clean and understandable unlike most stuff on the internet.
                      Thanks. I wrote these about a year ago. I was actually thinking that I should be a little more specific in some of the parts like the bolt release mod for example.

                      Just doing everything in these instructions and then throwing in an after market hammer will yield awesome results.

                      Here are a couple of other 10/22's of mine:



                      Chris
                      <----Rimfire Addict


                      Originally posted by Oceanbob
                      Get a DILLON...

                      Comment

                      • #26
                        GMG
                        Calguns Addict
                        • Dec 2008
                        • 7974

                        Tagged........Thanks for the info!
                        sigpic

                        A member of The Tonkin Gulf Yacht Club

                        Comment

                        • #27
                          iron330
                          Member
                          • May 2011
                          • 415

                          XDRoX, wondering who makes the black stock for the 10/22 in the top photo above?

                          Comment

                          • #28
                            HeHateMe
                            Senior Member
                            • Oct 2005
                            • 551

                            Bell and Carlson. I have the exact stock on one of my 10/22s. Love it. Great for offhand and bench.
                            **********************************************
                            - Official Red Ryder Carbine-Action Two-Hundred-Shot Range Model Air Rifle.
                            - WTB: Nerf N-Strike Longshot CS-6

                            Comment

                            • #29
                              XDRoX
                              Veteran Member
                              • Mar 2009
                              • 4420

                              Originally posted by iron330
                              XDRoX, wondering who makes the black stock for the 10/22 in the top photo above?
                              That's a Bell & Carlson. They make very good stocks for a reasonable price.
                              Chris
                              <----Rimfire Addict


                              Originally posted by Oceanbob
                              Get a DILLON...

                              Comment

                              • #30
                                XDRoX
                                Veteran Member
                                • Mar 2009
                                • 4420

                                Beat me to it
                                Chris
                                <----Rimfire Addict


                                Originally posted by Oceanbob
                                Get a DILLON...

                                Comment

                                Working...
                                UA-8071174-1