Unconfigured Ad Widget

Collapse

Another 15-22 owner...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • idbstyler
    Member
    • Apr 2010
    • 438

    Another 15-22 owner...

    Tyler Smith
  • #2
    ledman
    Veteran Member
    • Aug 2009
    • 2512

    Nice! I have one also but have not gotten a chance to shoot it yet. Mine is all stock not accessorized yet. Whats your s/n prefix? Mine is DTX.
    USMC 0311 Rifleman 86-90
    3rd Battalion 9th Marines
    1st Marine Division FMF
    Camp Pendelton, CA
    sigpic
    http://en.wikipedia.org/wiki/3rd_Battalion_9th_Marines

    Comment

    • #3
      idbstyler
      Member
      • Apr 2010
      • 438

      Originally posted by ledman
      Nice! I have one also but have not gotten a chance to shoot it yet. Mine is all stock not accessorized yet. Whats your s/n prefix? Mine is DTX.
      Mine is DTX also. NO blue springs. There are certain ammo it hates though. I run Federal American Eagle and it loves this ammo. It's $20 for 500rds. Pretty good deal.
      Tyler Smith

      Comment

      • #4
        rimfired
        Senior Member
        • Apr 2010
        • 505

        Welcome to the ever-growing 15-22 club!
        ______________________________

        Comment

        • #5
          mag318
          Member
          • Sep 2009
          • 127

          That is a great looking setup, did you paint the magazine? I understand Smiths next MOE M&P15-22 will be dark earth color.

          Comment

          • #6
            ricksvfx
            Junior Member
            • Apr 2010
            • 10

            hey nice one mate! i know i just got mine a few weeks ago and absolutely love shooting it. i noticed that you are thinking about a 3x mag - i currently have the primary arms one on my rifle and like it so far.

            what kind of paint did you use to paint your mag? ive been thinking about doing the same but i was just worried about feeding issues and color matching. simple stuff but i currently only have one mag.

            Comment

            • #7
              Stuie
              Member
              • May 2010
              • 110

              Originally posted by ledman
              Nice! I have one also but have not gotten a chance to shoot it yet. Mine is all stock not accessorized yet. Whats your s/n prefix? Mine is DTX.
              what's the deal with s/n prefix and spring color ? I will check mine when I get home.
              Last edited by Stuie; 05-12-2010, 11:23 AM.

              Comment

              • #8
                jonni
                Senior Member
                • Apr 2009
                • 597

                how do you like the vtac light mount?
                WTB: Yugo 7.62x39, 22lr, Finnish M28/39

                "I don't know we made brownies. And I think we're dead. Time is going by really really really really slow."

                -Former cop, http://www.youtube.com/watch?v=hnZb5wi_jsU

                Comment

                • #9
                  Bizcuits
                  In Memoriam
                  • Aug 2006
                  • 6957

                  Very nice!
                  Owner of Patriot Apparel - Decals, Vintage Signs, Apparel and More!
                  Ebay Store Link
                  Etsy Store Link

                  Comment

                  • #10
                    RobGR
                    Veteran Member
                    • May 2010
                    • 2880

                    Originally posted by Stuie
                    what's the deal with s/n prefix and spring color ? I will check mine when I get home.
                    Depending on the s/n and spring color, the 15/22 may be the problematic batch or the latest batch where you don't have to worry about the extractor and don't have to send it in to SW for repairs. That said, if you're not having issues, you should be fine.... right?

                    EDIT:

                    Actually, just found this -

                    This is a latest spec. of 15-22 extractor kit (a spring, an extractor and a retaining pin). While the extractor (left) remains same, apparently S&W has add an anti rotation tab to the new extractor retaining pin (middle). The old extractor retaining pin is on the far right. The new...


                    So, from that thread, there doesn't seem to be a s/n related to the problematic batch, it's all about the extractor.
                    Last edited by RobGR; 05-12-2010, 5:10 PM.

                    "If the American people ever allow private banks to control the issue of their currency, first by inflation, then by deflation, the banks & corporations that will grow up around them will deprive the people of all property until their children wake up homeless on the continent their Fathers conquered. The issuing power should be taken from the banks and restored to the people, to whom it properly belongs."

                    KrisAnne Hall on Oregon

                    "I am sullied - no more" Col. Ted Westhusing

                    Comment

                    • #11
                      Stuie
                      Member
                      • May 2010
                      • 110

                      Originally posted by RobGR
                      Depending on the s/n and spring color, the 15/22 may be the problematic batch or the latest batch where you don't have to worry about the ejector and don't have to send it in to SW for repairs.
                      The Prefix is DTU on my 15/22

                      Comment

                      • #12
                        idbstyler
                        Member
                        • Apr 2010
                        • 438

                        I just bought some Krylon Ultra Flat Tan spray paint in a can. I just sprayed it on with OUT and special tip. It turned out very well. In person you can tell there is a SLIGHT difference(i mean its hard to tell) in colors. It's a little lighter than the Magpul Dark Earth. I took apart the magazines, and I did wipe them down pretty good. Then I did like 2-3 coats. I only painted the magazine high enough so no black would be seen when the magazine was in the rifle. I didn't want any feeding issues or any problems withe the mag not going in easily. It only takes like 15 mins to dry. This is the inexpensive way of doing it. If you wanna go more expensive and maybe a little better quality google "duracoat in magpul flat dark earth". It should take you to a website called houtsenterprises.net. Look through the quick guide and you will find a few ways of doing it. If you have anymore questions feel free to pm.

                        Originally posted by mag318
                        That is a great looking setup, did you paint the magazine? I understand Smiths next MOE M&P15-22 will be dark earth color.
                        Tyler Smith

                        Comment

                        • #13
                          idbstyler
                          Member
                          • Apr 2010
                          • 438

                          I love the mount. Its perfect and works well with my Tapco Vertical Grip. It's the perfect hight so my thumb can easily push the button on my light.

                          Originally posted by jonni
                          how do you like the vtac light mount?
                          Tyler Smith

                          Comment

                          • #14
                            RobGR
                            Veteran Member
                            • May 2010
                            • 2880

                            Originally posted by Stuie
                            The Prefix is DTU on my 15/22
                            Hey, Stuie, from what I've read, they haven't correlated any s/n with the "defective" M&P 15 22s, it's all about the color of the springs.

                            If you feel like going through the 116 comments, there's a lot of interesting tips -



                            "Ronald Roth Says:
                            May 5th, 2010 at 5:12 am
                            ....This gun has the blue spring and I highly recommend this version. All the new guns, probably, have this spring, by now, but the older guns need to be checked before buying...."

                            And then on this page, there are pics toward the bottom of this page showing the blue springs -



                            It's been crazy all the talk and I have yet to get mine. If it shoots and ejects, it's good to go, otherwise it sounds like S&W has been on top of it with great customer service. But I'll definitely open mine up and make sure there is a blue spring before I take it home.

                            "If the American people ever allow private banks to control the issue of their currency, first by inflation, then by deflation, the banks & corporations that will grow up around them will deprive the people of all property until their children wake up homeless on the continent their Fathers conquered. The issuing power should be taken from the banks and restored to the people, to whom it properly belongs."

                            KrisAnne Hall on Oregon

                            "I am sullied - no more" Col. Ted Westhusing

                            Comment

                            • #15
                              RT13
                              Senior Member
                              • May 2006
                              • 1407

                              Spoke to S&W and they are no longer putting blue springs on the M&P's. The ones that had blue springs were older models that had not been updated and they replaced them with blue springs before shipping out to identify them. They also used blue springs for those who returned their problematic 15-22's. The serial number's are a way to help identify if yu have an older or newer one. The DTX is when they started updating. Some are not updated, some were replaced with blue springs, and some are updated but have silver springs. The way to tell is to look at the updated ejector design, the blue follower on the mags and the manual with a blue star stamped. I own two DTX. My older one had silver springs, bluefollower mags, updated ejector and red star stamp on manual. It has 2500 rounds with only two fte's that occurred during the first 300 rounds. I recently picked one up last week. DTX also with blue mag, silver springs, updated ejector, but had a blue star stamp on manual. This one looks like the updated one where they no longer use blue springs. I have it up for sale in the classifieds.

                              Comment

                              Working...
                              UA-8071174-1