What is your latest C&R project ?

[Crunch130]

A year ago, that was just a $69 stock.

Crunch

[Enfield47]

No permanent modifications needed I will bring the sight with me on Sunday. Also cannot wait to see yhe No. 1 MkV

Cool, I would like to see the sight. The one I saw said a hole had to be drilled for the windage adjustment.

I don't think the Mk V will make the trip unfortunately which I'm bummed about. I still have to fix the crack in the forestock before I can fire it. I finally got the tie plate out tonight so now I can get in there and fix it.

[Beetle Bailey]

It says "PH-5C" on it, which I suppose is the model number. It looked like a drop in but since you asked, I decided to make sure. So I removed the rear sight on my Maltby. Also removed the screw (ejector?) that goes into the left side of the receiver (below and to the left of the stripper clip bridge). The sight mounts into that hole and also the left hole where the original rear sight mounted. So yes, it is completely reversable and no drilling is needed. Maybe Parker Hale made more than one model?

I do not know much about these things - a friend had the sight and I thought it looked nifty so I bought it off him. And although it was not the plan, I think I will leave it on this rifle and shoot it this weekend

[TRAP55]

Sights for Enfields could be a thread subject in itself, I've never seen so many variations made for one rifle. Scroll down through these pics, interesting stuff.

http://www.enfieldresource.com/aperture-sights

[Marquand]

Trying to find someone local (Los Angeles/SFV/Burbank area) to replace the hammer mounted firing pin on one of my Colt Official Police revolvers. I've ruled out doing it myself and so far my only reliable choice is Jim Hoag in Canoga Park...but every time I drop by he seems to be closed already.

[Enfield47]

Sights for Enfields could be a thread subject in itself, I've never seen so many variations made for one rifle. Scroll down through these pics, interesting stuff.
http://www.enfieldresource.com/aperture-sights

That is a dizzying array of sights.

[SVT-40]

Building a shop and garage for my C&R's in total 1,680 square feet of space. I'm doing most of the work myself with the help of a few subs. I drew the plans myself...Also removed 21 large dump truck loads of dirt to make the spot level. Good fun. Now if the monsoon's will cooperate I can get the roof on and the building sealed up...

[TRAP55]

Building a shop and garage for my C&R's in total 1,680 square feet of space. I'm doing most of the work myself with the help of a few subs. I drew the plans myself...Also removed 21 large dump truck loads of dirt to make the spot level. Good fun. Now if the monsoon's will cooperate I can get the roof on and the building sealed up...

Some inletting required?
Now that is a man cave! Did you build in a vault?
Those monsoons are no joke. I thought I knew what rain was after living on the north coast, until I experienced one that had pumpkin size rocks washing through the parking lot!

[TRAP55]

Trying to find someone local (Los Angeles/SFV/Burbank area) to replace the hammer mounted firing pin on one of my Colt Official Police revolvers. I've ruled out doing it myself and so far my only reliable choice is Jim Hoag in Canoga Park...but every time I drop by he seems to be closed already.

Marquand, good decision not to try it, the Colt FP's are a real PITA to replace. S&W used a hollow rivet, and they are fairly easy to do, "IF" you can find a new rivet to install.
Colt used a solid pin, and getting one out, without the know how, you'll trash the hammer. The only smith I know of that specializes in old Colt DA's is in NE, and he has a 2yr backlog! Who ever you find to do it, make sure they've done one before.

[justin4fun]

Trap just post a pic of your wall of repairs. plus the mosin bolt and a 521T stock repair when it comes home. Still haven't seen pics of your new 10/22 stock finished? I will get ahold of W55 and see what we can do to keep you busy. What are you doing helping someone move????

[Enfield47]

Building a shop and garage for my C&R's in total 1,680 square feet of space. I'm doing most of the work myself with the help of a few subs. I drew the plans myself...Also removed 21 large dump truck loads of dirt to make the spot level. Good fun. Now if the monsoon's will cooperate I can get the roof on and the building sealed up...

Now that is a real man cave and will be awesome once complete! All of your safes and guns will have a nice home. Are you going to have running water & AC?

[SVT-40]

Yup some minor wood work ... It will have a strong room and AC in the "museum" as my wife calls it, and it will have water.

Here is what the area looked like before all the digging and destruction. I moved 6 pine trees...

[Discogodfather]

It rains in Arizona?

[Enfield47]

My hat is off to you, that is quite an undertaking you have going. Just moving all of that dirt is bad enough but reloacting six pine trees too is pretty amazing.

[pitfighter]

Nice SVT - that's the way to do it!