Beretta CX4 in CA?

[Boxer]

Can the Beretta CX4 9mm be made CA complaint?
Are there Radd BB locks made for them and do other things need to be done to make them CA Complaint?
Do you know of a company that will do this and then ship to my FFL?
Is the gun worth making CA compliant?

[radd]

Can the Beretta CX4 9mm be made CA complaint?
Are there Radd BB locks made for them and do other things need to be done to make them CA Complaint?
Do you know of a company that will do this and then ship to my FFL?
Is the gun worth making CA compliant?

There are 3 different Mag Catch for the CX-4 on the market.

There is CX-4 that take the original Cougar .45 Mag, and there is another Beretta version .45 Mag. The 9mm and .40 cal are the same.

So I may have to narrow down to current versions. But, if I can get a rifle in my hands, it can be done.

Radd

[radd]

BTW: CX4 is also about 29.5" or 29.7" OAL. So you would need to add another 1/2" just to be on the safe side to meet 30" OAL.

So, if I do make a magazine lock for it, then I am also planning on adding a stock extendsion for it also.

Radd

[jc_stecker]

That'd be awesome. I've been waiting to get my hands on a .40 carbine other than the over-priced PC4s.

[Boxer]

Radd thanks for the information let me see if I can close out a deal and get back to you.

[Guntech]

Wait are you saying the OAL 30" is only a CA law?

[Quiet]

Wait are you saying the OAL 30" is only a CA law?

Yes. Semi-auto centerfire rifle with OAL 30" is a CA law.

Federally it's OAL 26".

[TonyM]

BTW: CX4 is also about 29.5" or 29.7" OAL. So you would need to add another 1/2" just to be on the safe side to meet 30" OAL.

So, if I do make a magazine lock for it, then I am also planning on adding a stock extendsion for it also.

Radd

My opinion:

If you are going to do this for the Cx4, and as you mentioned for the FS2000 in another thread, I would recommend coming up with a muzzle device/sleeve rather than a stock extension.

I don't know about anyone else, but to me, a stock extension is an instant deal killer. All of the ones I've seen so far (the PS90 one is stuck in my mind) is a nasty Obama-nation ( ) and ruins the rifle.

Oh, btw, I love my Raddlock on my USC, got it right when you came out with it and not a single issue since. Thx.

[Boxer]

TonyM, great suggestion.

[trinydex]

My opinion:

If you are going to do this for the Cx4, and as you mentioned for the FS2000 in another thread, I would recommend coming up with a muzzle device/sleeve rather than a stock extension.

I don't know about anyone else, but to me, a stock extension is an instant deal killer. All of the ones I've seen so far (the PS90 one is stuck in my mind) is a nasty Obama-nation ( ) and ruins the rifle.

Oh, btw, I love my Raddlock on my USC, got it right when you came out with it and not a single issue since. Thx.

what's wrong with the stock extension?

so if a radlock and extension of some sort are made, then we can fill the thumbhole stock and remove the maglock after it's imported right?

[aplinker]

My opinion:

If you are going to do this for the Cx4, and as you mentioned for the FS2000 in another thread, I would recommend coming up with a muzzle device/sleeve rather than a stock extension.

I don't know about anyone else, but to me, a stock extension is an instant deal killer. All of the ones I've seen so far (the PS90 one is stuck in my mind) is a nasty Obama-nation ( ) and ruins the rifle.

Oh, btw, I love my Raddlock on my USC, got it right when you came out with it and not a single issue since. Thx.

I think you missed the part where he said the CX4 is 29.7"

I agree, if we're adding 4". However, 0.3" isn't going to noticed...

[TonyM]

what's wrong with the stock extension?

so if a radlock and extension of some sort are made, then we can fill the thumbhole stock and remove the maglock after it's imported right?

Because extending the stock on other projects (see the PS90 and FS2000) is hokey looking at best. Adding a longer brake or sleeve is a more elegant solution (In my opinion).

For these guns, I would rather have a fixed 10 round mag with the Raddlock than filling the stock and going with other mods for a detachable mag.

[TonyM]

I think you missed the part where he said the CX4 is 29.7"

I agree, if we're adding 4". However, 0.3" isn't going to noticed...

Dunno about you, but I'd notice it everytime I shoulder the weapon.

[trinydex]

this is a really stupid question. where would the muzzle device screw on?

[radd]

Because extending the stock on other projects (see the PS90 and FS2000) is hokey looking at best. Adding a longer brake or sleeve is a more elegant solution (In my opinion).

For these guns, I would rather have a fixed 10 round mag with the Raddlock than filling the stock and going with other mods for a detachable mag.

CX-4 does not come with threaded barrel. Adding a muzzle extention will be a challenge to keep the compliance parts price low. Not to mention, not scratching the barrel at the same time.

But, I have spoken with a Rep at Beretta. They are working on their own Butt Pad extension by about 3/4". But they won't give me an ETA.

Radd