Question: CZ trigger pull difference

[CAGLS]

The P-01's hammer spring is compressed more than the full size CZ's. It's in a smaller space. The after market hammer springs are not shorter for the compacts. They are all the same length. So this may be a reason why the trigger pulls may feel heavier in the P-01 or any other compact CZ even with the same weight hammer spring in a full size CZ.

I've got all three, although my SP-01 Tactical has a CZC trigger job so I'm pulling from memory. As far as I recall, all three are roughly the same. The P-01 might be a tad heavier on the DA, but that may simply be misperception.

I love all three of them, regardless.

[himurax13]

You have an extra spring, and an extra lever creating friction. Overall, the sear cage is a bit more complex.

You can view my created threads, and check out the walk through I did on the decocker CZs, and compare to some of the standard DA/SA guns.

Thank you for explaining it more eloquently.

The P-01's hammer spring is compressed more than the full size CZ's. It's in a smaller space. The after market hammer springs are not shorter for the compacts. They are all the same length. So this may be a reason why the trigger pulls may feel heavier in the P-01 or any other compact CZ even with the same weight hammer spring in a full size CZ.

Another good point.

I wonder if only having one hammer hook affects this as well.

Compared to a 1.5 lb SAO trigger, the difference feels like miles apart.

[zfields]

Another good point.

I wonder if only having one hammer hook affects this as well.

Compared to a 1.5 lb SAO trigger, the difference feels like miles apart.

I'd put my money on the single hook effecting it more. Mainspring weight really doesn't seem to effect the SA. Seems to me more like the other action springs, along with the friction and angle of the hammer hooks/sear.

[cusco19]

I noticed on my P01, even after changing it to 11.5# or 13# mainspring, during DA (even devoted position) u can feel the spring bend and twist during take up.

[Tok36]

I noticed on my P01, even after changing it to 11.5# or 13# mainspring, during DA (even devoted position) u can feel the spring bend and twist during take up.

You can polish the Main Spring Strut on all four edges to lessen the feel of the hammer spring compressing.

[cusco19]

Thanks Tok36.. I did some light polish before.. guess I need to do more.