This thread is full of awesome! Can't wait to see the final result. The "Black Mamba" and black chrome ideas sound very cool...
Unconfigured Ad Widget
Collapse
|
|
|
|
|
|
|
|
My Python project - returning her to glory
Collapse
X
-
Laws against murder and attempted murder should have been the only gun control laws ever needed in America... -
You should have titled this thread The Walking Dead. Python ResurrectionFormerly lugerdevil666

Comment
-
Awesomesigpic
NRA Patron MemberComment
-
Wow, Great thread and project! Nice to see someone restoring a classic rather than just mounting it on a maple plank. Can't wait to see the final results! Range time pics too!
RobertComment
-
UPDATE
Discussed the gun with Bob several time this week and came to a final plan yesterday.
The Bright Chrome was possible but it would have cost "several hundred" more in polishing costs (on top of the $130 additional in base costs). So Brushed Chrome is the way I'm going. Bob says it will look like a matt SST finish
The engraving will look just like that - engraving, NOT like Colt rollmarks. Big difference! Plus as I suspected it will add at least a month to the turn around time and will cost a lot of $$$. So no engraving. Plus as noted by a few posts, I agree that the gun will look very cool without. I am having the Colt Pony recut. Its a very cool logo, historical and I think will look good as the only markings on the gun.
I did spurge on the sights. Easiest and cheapest way would be keeping both sights in black. But I love the look of nickeled sights on my older Pythons so I'm having both sights chromed. Bob can even do a red insert mod on the front sight after the plating. With that mod and all the work involved in plating the rear sight it will add another $150 but I think it will be worth it.
Lastly I spoke with Mr. Culina this week and the Malagassy Ebony wood has been acquired and he should be starting on the grips in a week or so. I was sweating this one a bit as Ebony wood is getting almost impossible to find anymore. He is the only guy who I could find that was still making grips out of this wood. Plus his Exhibition grade product is like nothing I've ever seen! Check them out if your not familiar: http://culinagrips.com/
Gun should be home by the end of July, so more to come then.
Thanks again for the interest and positive comments!!!Comment
-
That's going to be one pretty pony (pun intended) when it's done!I'm retired. That's right, retired. I don't want to hear about the cop who stopped you today or how you didn't think you should get a ticket. That just makes me grumpy!Comment
-
Too bad you can't pony up for the arguably nicer finish
Comment
-
I just found this thread.
And, I have to tell you I am a Colt purest.
And, I have to tell you that you are doing a great thing. That poor old snake you bought looks great so far and I can't wait to see the final product.
Sent from my DROID RAZR HD using TapatalkYes you can have 2 C&R 03 FFL's; 1 in California and 1 in a different state.
Originally posted by Erion929Comment
-
Awesome, cant wait to see what the final result is. Thanks for sharing!Comment
-
Actually cost was not that important in this decision. I could have easily afforded the cost but in discussions with Bob I discovered other more important issues.
First Bright Chrome is even more unforgiving than Bright SST on fingerprints and oil smearing. It really is a finish for display guns and this gun is going to be a shooter. The "Brushed" finish is second only to his Bright finish as far as quality is concerned. Here is a page from his website that says it better than I can: http://www.apwcogan.com/plating-and-...g-surface.html
Second in order to get the correct surface prep for the Bright finish a lot of material would need to be further removed, especially in the grip area. We were afraid of altering the lines of the gun, something I did not want to do. It would also make "stock" grips unusable.
The turnaround time would have increased greatly. Bob does all the Bright finish polishing himself and he has a very full dance card at the moment. And while not a deal breaker for me, having the gun back in July vs October was a consideration.
Lastly I took out an example of a Bright SST and a Matt SST Python and stared at them all night
. And while the bright is the "attention getter" I actually prefer the matt finish, again especially on a shooter. That was the real decision maker, I like the matt look better.
Anyway thanks again to all that have commented and PM'd me on this project. I did not think it would garner this much positive feedback.
Happy Fathers Day to all the Dad's out there!!
Comment
-
Calguns.net Statistics
Collapse
Topics: 1,870,671
Posts: 25,174,840
Members: 358,862
Active Members: 5,380
Welcome to our newest member, 1776 Arms.
What's Going On
Collapse
There are currently 18898 users online. 116 members and 18782 guests.
Most users ever online was 239,041 at 11:39 PM on 02-14-2026.

Comment