Frame for Glock 17???????

[mikeinla]

Does anyone know any FFL in the Los Angeles area that sells Glock frames? I need a new frame for a Glock 17 Gen 3. Rockyourglock.com sells a complete frames for $199 but they are out of state and out of stock. http://www.rockyourglock.com/custom/...-LOWER17G3.htm

[1911su16b870]

Lonewolf makes the Timberwolf frame but I do not know if they are in stock or not. There is also the aluminum frame...but I can't recall who makes it.

[Mr310]

I've read a couple of times on here that you cannot DROS a frame. Is that correct?

[Cyc Wid It]

You can PPT a frame if the same model of gun is available to do the safety demonstration. You cannot purchase a frame outside of PPT unless you are roster exempt.

[SMR510]

You can PPT a frame if the same model of gun is available to do the safety demonstration. You cannot purchase a frame outside of PPT unless you are roster exempt.

Or you have a gunsmith build it into a working gun and then SSE it, I believe that a 07 ffl would be required and they would have to mark the frame as their own model.

[97F1504RAD]

You can PPT a frame if the same model of gun is available to do the safety demonstration. You cannot purchase a frame outside of PPT unless you are roster exempt.

Could you but say a G17 Frame have it shipped to someone like Table Rock then also ship them a complete G17 upper assembly slide/barrel etc. and then have him ship put the two together and then send a complet pistol to a local FFL for transfer?

[Sam]

Could you but say a G17 Frame have it shipped to someone like Table Rock then also ship them a complete G17 upper assembly slide/barrel etc. and then have him ship put the two together and then send a complet pistol to a local FFL for transfer?

Why not just loan a willing and able FFL locally to throw your own slide assembly on a completed frame?

[Oceanbob]

Well, I bought 2 Frames from Glockmeister.com in Arizona over the phone.

Had them sent to my FFL; before they arrived I paid a visit to my FFL and dropped off a complete GLOCK upper. (complete slide, barrel and RPA)

When the frames arrived (this was last year and several months apart) the FFL simply installed the uppers and gave me a call to come down and do the DROS.

One was a GLOCK 20SF that I built a Longslide project (lonewolf) for. And the other was a GLOCK 19 (Franken-Glock) that I built up for my 14 year old daughter.

Here is the thread:

http://www.calguns.net/calgunforum/showthread.php?t=545469

I think it depends on the FFL.

[Sam]

Well, I bought 2 Frames from Glockmeister.com in Arizona over the phone.

Had them sent to my FFL; before they arrived I paid a visit to my FFL and dropped off a complete GLOCK upper. (complete slide, barrel and RPA)

When the frames arrived (this was last year and several months apart) the FFL simply installed the uppers and gave me a call to come down and do the DROS.

One was a GLOCK 20SF that I built a Longslide project (lonewolf) for. And the other was a GLOCK 19 (Franken-Glock) that I built up for my 14 year old daughter.

Here is the thread:

http://www.calguns.net/calgunforum/showthread.php?t=545469

I think it depends on the FFL.

How much did that cost you total? It seems like once you are all done you may be pretty close to the price of a complete pistol.

[stphnman20]

tagged. Would also like to know.

[Oceanbob]

I think about $500 bucks. Worth it at the time. In todays market $500 bucks isn't much for a Glock 19 with KKM barrel. Hopefully we will see pricing and supplies return to normal. (someday)

[97F1504RAD]

Why not just loan a willing and able FFL locally to throw your own slide assembly on a completed frame?

I think finding a local FFL willing to do this is the issue.

[Cyc Wid It]

Why not just loan a willing and able FFL locally to throw your own slide assembly on a completed frame?

Need 07 for this IIRC.

Could you but say a G17 Frame have it shipped to someone like Table Rock then also ship them a complete G17 upper assembly slide/barrel etc. and then have him ship put the two together and then send a complet pistol to a local FFL for transfer?

You can do this.

[Table Rock Arms]

Could you but say a G17 Frame have it shipped to someone like Table Rock then also ship them a complete G17 upper assembly slide/barrel etc. and then have him ship put the two together and then send a complet pistol to a local FFL for transfer?

In order for me to do that I would have to engrave the firearm with my info as I would become the manufacturer. You may find a dealer willing to do it for you without, but I would not be one of them.

[sigstroker]

There's also the excise tax to pay?