Unconfigured Ad Widget

Collapse

ar15 selector switch problem-HELP!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #31
    kcstott
    I need a LIFE!!
    • Nov 2011
    • 11796

    The adjustable selector will make the safety work but it will do nothing for your trigger and hammer relationship. you will in all likely hood not have enough sear engagement on the hammer and could be in an unsafe condition with or without the safety.

    Those holes need to be plugged and redrilled in the correct location.

    Comment

    • #32
      LCU1670
      Veteran Member
      • Mar 2010
      • 2865

      thanks! On the other weapon, I used a timiney drop in trigger, so since that is drop in, sear engagement is fixed, correct?
      sigpic Waterborne!

      Former: Knight of Front Sight &
      Gold Star Member

      Comment

      • #33
        kcstott
        I need a LIFE!!
        • Nov 2011
        • 11796

        yep. you just may have a hell of a time getting the pins in

        Comment

        • #34
          dchang0
          Veteran Member
          • Jul 2008
          • 2772

          Originally posted by kcstott
          yep. you just may have a hell of a time getting the pins in
          I suppose that with some of the drop-in one-piece trigger systems, it isn't actually necessary to use the pins, so long as you can lock the entire trigger assembly in the right position within the lower.

          Technically, you could take the trigger pack, secure it in the correct location so that the selector always works properly, drill holes carefully through the receiver and just into the walls of the trigger pack (likely aluminum), then thread these holes and install bolts that hold the pack firmly in place, and the whole thing would work safely and well. You'd never be able to use a different trigger pack without drilling and threading it too, but at least you would avoid having to weld up 7075.

          Yeah, it'd look stupid, but you would still be able to use the lower you made without spending much more than the cost of bolts or machine screws. They'd have to be the perfect length so as to not protrude into the interior of the trigger pack and interfere with its function but still be long enough to grab the trigger pack securely.
          Last edited by dchang0; 01-05-2014, 10:48 PM.

          Comment

          • #35
            LCU1670
            Veteran Member
            • Mar 2010
            • 2865

            Oddly enough, went in with no trouble at all!! But, fires on safe. Hoping the JP adjustable selector will be and easy way out.

            One guy suggested to me to buy a cheap feeler gauge, and J B Weld (epoxy), the correct width to the trigger tail to take up the extra space, what do you guys think??
            sigpic Waterborne!

            Former: Knight of Front Sight &
            Gold Star Member

            Comment

            • #36
              ar15barrels
              I need a LIFE!!
              • Jan 2006
              • 57199

              Originally posted by LCU1670
              One guy suggested to me to buy a cheap feeler gauge, and J B Weld (epoxy), the correct width to the trigger tail to take up the extra space, what do you guys think??

              I think finding a good welder to weld a pad on the tail and then fitting it to your lower is the better solution.

              The Jp adjustable selector is only going to adjust the "fire" location clearance.
              There is no setscrew to adjust the "safe" height which is where you are having problems...
              Randall Rausch

              AR work: www.ar15barrels.com
              Handguns: www.handgunbarrels.com
              Bolt actions: www.700barrels.com
              Foreign Semi Autos: www.akbarrels.com
              Most work done while you wait on a scheduled shop visit.

              Comment

              • #37
                LCU1670
                Veteran Member
                • Mar 2010
                • 2865

                Originally posted by ar15barrels
                I think finding a good welder to weld a pad on the tail and then fitting it to your lower is the better solution.

                The Jp adjustable selector is only going to adjust the "fire" location clearance.
                There is no setscrew to adjust the "safe" height which is where you are having problems...
                Are you sure? I just reread the installation instructions on line, they have you adjust the set screws in the safe position to prevent trigger movement, then you lock the set screw in, insure it doesn't fire, then switch to fire and drop the hammer.
                sigpic Waterborne!

                Former: Knight of Front Sight &
                Gold Star Member

                Comment

                • #38
                  ar15barrels
                  I need a LIFE!!
                  • Jan 2006
                  • 57199

                  Originally posted by LCU1670
                  Are you sure? I just reread the installation instructions on line
                  I'm not sure.
                  You should probably get one and see if it does what you need it to do.
                  Randall Rausch

                  AR work: www.ar15barrels.com
                  Handguns: www.handgunbarrels.com
                  Bolt actions: www.700barrels.com
                  Foreign Semi Autos: www.akbarrels.com
                  Most work done while you wait on a scheduled shop visit.

                  Comment

                  • #39
                    LCU1670
                    Veteran Member
                    • Mar 2010
                    • 2865

                    It's on order, here's hoping!
                    sigpic Waterborne!

                    Former: Knight of Front Sight &
                    Gold Star Member

                    Comment

                    • #40
                      LCU1670
                      Veteran Member
                      • Mar 2010
                      • 2865

                      Received the adjustable selectors today, solved the problems in both lowers!
                      sigpic Waterborne!

                      Former: Knight of Front Sight &
                      Gold Star Member

                      Comment

                      • #41
                        LCU1670
                        Veteran Member
                        • Mar 2010
                        • 2865

                        I noticed a guy in colorado, he charges around $69.00, you send him the lower, he drills it out to specs, taps it, and screws in metal sleeves, and then sends you anti-walk pins. The idea is get it back to specs, or if your pins are comming out due to wear.
                        sigpic Waterborne!

                        Former: Knight of Front Sight &
                        Gold Star Member

                        Comment

                        • #42
                          klewan
                          Veteran Member
                          • Jun 2011
                          • 3031

                          Originally posted by LCU1670
                          I noticed a guy in colorado, he charges around $69.00, you send him the lower, he drills it out to specs, taps it, and screws in metal sleeves, and then sends you anti-walk pins. The idea is get it back to specs, or if your pins are comming out due to wear.
                          That would have been half of what you paid for the trick parts... just sayin...Happy you got it to work, and more info on how 80%'s can get screwed up...

                          Comment

                          • #43
                            LCU1670
                            Veteran Member
                            • Mar 2010
                            • 2865

                            The adjustable selector was $63 total.
                            sigpic Waterborne!

                            Former: Knight of Front Sight &
                            Gold Star Member

                            Comment

                            • #44
                              ar15barrels
                              I need a LIFE!!
                              • Jan 2006
                              • 57199

                              Originally posted by LCU1670
                              The adjustable selector was $63 total.
                              ouch!
                              Randall Rausch

                              AR work: www.ar15barrels.com
                              Handguns: www.handgunbarrels.com
                              Bolt actions: www.700barrels.com
                              Foreign Semi Autos: www.akbarrels.com
                              Most work done while you wait on a scheduled shop visit.

                              Comment

                              • #45
                                LCU1670
                                Veteran Member
                                • Mar 2010
                                • 2865

                                I'm just glad it worked, now another lesson about ar15 lowers learned!
                                sigpic Waterborne!

                                Former: Knight of Front Sight &
                                Gold Star Member

                                Comment

                                Working...
                                UA-8071174-1