Unconfigured Ad Widget

Collapse

HELP! Buffer tube threads

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • newguy101
    Member
    • Nov 2012
    • 116

    HELP! Buffer tube threads

    I recently posted this in the wrong thread and was asked to move it!

    I recently bought an 80% lower at a build party from DR.Death and I can not get any of my buffer tubes to thread into this lower receiver.
    The only thing I can think of, is that the female threads in the receiver were cut wrong.

    Can anyone help me with this? Anyone have a buffer tube tap? Or who would I ask to do this work?

    Thanks for the help.

    Twisted and confused.
  • #2
    stitchnicklas
    Calguns Addict
    • Feb 2010
    • 7091

    pictures would help more.

    Comment

    • #3
      kcstott
      I need a LIFE!!
      • Nov 2011
      • 11796

      Most likely the threads are not cut incorrectly they were just cut prior to anodizing.

      Comment

      • #4
        cabinetguy
        Release the Cabinets!
        CGN Contributor - Lifetime
        • Sep 2010
        • 12659

        Originally posted by stitchnicklas
        pictures would help more.

        Comment

        • #5
          NorCalXJ
          Veteran Member
          • Aug 2012
          • 3992

          Is it a commercial or mil spec buffer tube? That could be the problem.
          Terminal Lance

          Comment

          • #6
            newguy101
            Member
            • Nov 2012
            • 116

            Thanks cabinet guy. Although the threads are slightly raised on a milspec tube the thread are essentially the same. I think this Is why we don't have milspec and commercial specific lower receivers.

            Also I tried both and haven't had any luck.

            Comment

            • #7
              fast54vw
              Senior Member
              • Jul 2010
              • 637

              I have the tap. Im in stanton near beach & katella. If u want to come by and try chasing the threads send me a pm
              NRA Life Member

              Comment

              • #8
                kcstott
                I need a LIFE!!
                • Nov 2011
                • 11796

                Originally posted by NorCalXJ
                Is it a commercial or mil spec buffer tube? That could be the problem.
                Threads are the same. tube diameter is different

                Comment

                • #9
                  JL_Billet
                  Vendor/Retailer
                  • Oct 2012
                  • 275

                  The thread pitch is the same but the OD of the threads is different on Mil spec and Comm. Mil-spec has a larger OD so if the person who machined the lower did it even slightly undersized the buffer won't thread all the way in.

                  Originally posted by kcstott
                  Threads are the same. tube diameter is different
                  Visit jlbillet.com for the highest quality parts on the market.

                  Comment

                  • #10
                    kcstott
                    I need a LIFE!!
                    • Nov 2011
                    • 11796

                    Originally posted by jimi
                    The thread pitch is the same but the OD of the threads is different on Mil spec and Comm. Mil-spec has a larger OD so if the person who machined the lower did it even slightly undersized the buffer won't thread all the way in.
                    Minor differences in how the threads are put on the RE. that creates the difference in OD but the Pitch Dia is called out identical. The commercial one is called out .017" smaller in OD. but as far as I know, No one machines the lower with 1.170 16 TPI they are all machined 1.1875" 16 TPI as per the Mil spec
                    So as far as i'm concerned they are same. Now if the lower was threaded first then anodized it is not mil spec. and the buffer tube may not fit correctly

                    Comment

                    • #11
                      GMG
                      Calguns Addict
                      • Dec 2008
                      • 7974

                      Midway USA has the tap....http://www.midwayusa.com/product/799...6-thread-ar-15

                      1-3/16-16.

                      Brownells also has a tap, less expensive.
                      Last edited by GMG; 10-15-2013, 8:38 PM.
                      sigpic

                      A member of The Tonkin Gulf Yacht Club

                      Comment

                      • #12
                        newguy101
                        Member
                        • Nov 2012
                        • 116

                        I wish I could meet up with you fast54vw but I'm in Visalia. I guess I'm buying from brownells unless I can find a used one somewhere.

                        Comment

                        • #13
                          Germz
                          Vendor/Retailer
                          • Apr 2013
                          • 4691

                          Originally posted by NorCalXJ
                          Is it a commercial or mil spec buffer tube? That could be the problem.
                          what!? its the same threading on both!
                          Retired Account

                          Comment

                          • #14
                            G-forceJunkie
                            Calguns Addict
                            • Jul 2010
                            • 6530

                            Originally posted by newguy101
                            I wish I could meet up with you fast54vw but I'm in Visalia. I guess I'm buying from brownells unless I can find a used one somewhere.
                            They are expensive. Perhaps call around to some local machine shops and see if they have one you could borrow/rent/ pay them to tap it out. Probably cheaper than buying a $100+ tap.

                            Comment

                            • #15
                              ar15barrels
                              I need a LIFE!!
                              • Jan 2006
                              • 57201

                              Originally posted by NorCalXJ
                              Is it a commercial or mil spec buffer tube? That could be the problem.
                              The threads are the same pitch diameter on milspec and commercial buffer tubes.
                              Pitch diameter directly measures thread fit.
                              Thread OUTSIDE diameter can be drastically different with no effect on thread fit.
                              The difference between milspec and commercial threads is only in the outside diameter.
                              Randall Rausch

                              AR work: www.ar15barrels.com
                              Handguns: www.handgunbarrels.com
                              Bolt actions: www.700barrels.com
                              Foreign Semi Autos: www.akbarrels.com
                              Most work done while you wait on a scheduled shop visit.

                              Comment

                              Working...
                              UA-8071174-1