My Mauser Build,

[Futurecollector]

Hey all, So I have decided to go ahead and re-barrel my Mauser to .35 Whelen.

I wanted to try and get help finding random parts, I am in need of basically all the parts minus the Receiver and Barrel and possibly a stock, if any of you guys are no longer in need of any of these parts pm me or reply here so we can work something out.

Anyways, Im cheap and I wasn't really looking to forward on buying a Barrel Vise or an Action Wrench so I went ahead and made my own.

Here are some pictures of the Action wrench,









I plan on building the barrel vise tomorrow and testing to see if it works or if it breaks completely. lol
So far im into this build 12 bucks and a burrito

[wash]

I made a Mosin Nagant receiver wrench using angle and 2x4s.

The 2x4s were a bad idea, too soft. It worked for removing one barrel after I made a relief cut.

To put the new barrel on I am going to need to make a better wrench, maybe using hardwood.

Good luck with yours.

[Futurecollector]

I made a Mosin Nagant receiver wrench using angle and 2x4s.

The 2x4s were a bad idea, too soft. It worked for removing one barrel after I made a relief cut.

To put the new barrel on I am going to need to make a better wrench, maybe using hardwood.

Good luck with yours.

Why eve use wood though?