Unconfigured Ad Widget

Collapse

Saiga conversion problem *pics added*

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    Gowking
    Veteran Member
    • Mar 2008
    • 2664

    When you install a new hammer you will get some drag as the bolt rides over it until the parts have worn in together. This is why on a new build you can pull the bolt back and ride it gently forward a bit then let off and the bolt will stay there. I see this at the range all the time but if you were to bump the rifle then the bolt would overcome the friction and fly forward into battery. My guess is that the OP's situation is probably such that his hammer is tight up against the Saiga BHO so it requires some force to get it to move down and let the bolt go forward into battery.

    -MRA

    Comment

    • #17
      darthnugget
      Member
      • Feb 2011
      • 351

      I am new to this however when I just built my 3 kits I had some sticky spots, while one of the issues on the rifle was the ejector clearance which needed to be trimmed, they all needed to be worked in to smooth things out. I was able to do this by taking a soft rubber mallet and bumping the charging handle down and letting it spring back up. I did this 20-30 times and things just smoothed right out and it flows beautifully now.
      Since we can never hope to understand why we're here, if there's even anything to understand, the individual should choose a goal and pursue it wholeheartedly, despite the certainty of death and the meaninglessness of action.

      -------------------
      Please sign up for Dropbox http://db.tt/8dsT7hwb

      Comment

      • #18
        welchy
        Senior Member
        • Apr 2009
        • 1282

        I bought from Dinzag so the hammer was already trimmed for BHO. It is not hitting a just a little. They overlap ~1/8 of an inch.

        Comment

        • #19
          tujungatoes
          Calguns Addict
          • Dec 2006
          • 7942

          Hard to tell(on my cellphone), but in the first picture it looks like you have removed the bolt. If that's the case does it still bind with the bolt in the carrier?
          sigpic
          Originally posted by Dr. Elky
          If your a man who wears white sunglasses, your probably a douche bag
          Originally posted by CSACANNONEER
          I've been know to cross dress and go the other way at certain events.

          Comment

          • #20
            welchy
            Senior Member
            • Apr 2009
            • 1282

            Yes it does. I took pic without it to get a clearer view.
            Last edited by welchy; 09-20-2011, 2:54 PM.

            Comment

            • #21
              ns3v3n
              Senior Member
              • Feb 2007
              • 1535

              So if you pull the bolt all the way back and let go, it wont go back to battery?
              The stuff that goes boom.

              Comment

              • #22
                welchy
                Senior Member
                • Apr 2009
                • 1282

                No, it sticks. If I give the charging handle a firm smack it will go into battery.

                Comment

                • #23
                  ns3v3n
                  Senior Member
                  • Feb 2007
                  • 1535

                  try cycling it through a bunch of times and see if it'll smooth out. You probably dont want to take any material off manually, plus lube all the parts to see if that helps.
                  The stuff that goes boom.

                  Comment

                  • #24
                    welchy
                    Senior Member
                    • Apr 2009
                    • 1282

                    I'll try that and see if it helps.

                    Comment

                    • #25
                      CSACANNONEER
                      CGN/CGSSA Contributor - Lifetime
                      CGN Contributor - Lifetime
                      • Dec 2006
                      • 44094

                      69Mach1 recommends a lot of lube and cycling it at least 500 times by hand.
                      NRA Certified Pistol, Rifle, Shotgun and Metallic Cartridge Reloading Instructor
                      California DOJ Certified Fingerprint Roller
                      Ventura County approved CCW Instructor
                      Utah CCW Instructor


                      Offering low cost multi state CCW, private basic shooting and reloading classes for calgunners.

                      sigpic
                      CCW SAFE MEMBERSHIPS HERE

                      KM6WLV

                      Comment

                      • #26
                        welchy
                        Senior Member
                        • Apr 2009
                        • 1282

                        Wow, sounds like I am going to have a sore arm. Is there a preferred lube. 10-30w?

                        Comment

                        • #27
                          chiz
                          Senior Member
                          • Dec 2008
                          • 964

                          I would do what Dartnugget said. I just finished a few builds and i would set them on the work bench and hit the charging handle with a rubber mallet a bunch of times and they are all fine now.
                          sigpic

                          Comment

                          • #28
                            tujungatoes
                            Calguns Addict
                            • Dec 2006
                            • 7942

                            Another less time consuming, and less hammer oriented solution might be to take a stone(or some fine grit sandpaper) and smooth/polish the contacting areas on the hammer and bolt carrier. Maybe round the sharp corners just a little. Just go slow and try to remove as little material as possible.
                            sigpic
                            Originally posted by Dr. Elky
                            If your a man who wears white sunglasses, your probably a douche bag
                            Originally posted by CSACANNONEER
                            I've been know to cross dress and go the other way at certain events.

                            Comment

                            • #29
                              ivsamhell
                              Veteran Member
                              • Nov 2008
                              • 2623

                              my S12 does this, not as bad. I think its the major cycling issue, it is definitely light years from a smooth transition. I did some reprofiling of the carrier to try to make it flow better, but its still not ideal and I haven't taken it out yet.
                              *anyone could be typing these messages, and probably not while under oath.

                              Comment

                              • #30
                                straykiller
                                Veteran Member
                                • Feb 2010
                                • 2573

                                Polish the hammer face an the underside of the bcg i had to do thison my psl pistol it was doing the exact same thing as your i will post pics for u later when im home


                                Zombie Stickers For Sale

                                ClassifiedWeapons.com

                                Looking for a particular parts kit? Check out our parts kit locator that is automatically updated every 6 hours. Now you can see parts kits being offered by multiple websites in one location. Just select the parts kit button on the right of the home page to begin looking.
                                -------
                                Home Builds- 1919a4, Sten Mk3, Romy G Ak-47, PSL Pistol,Romanian RPK

                                Comment

                                Working...
                                UA-8071174-1