Unconfigured Ad Widget

Collapse

Coating question?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • wash
    Calguns Addict
    • Aug 2007
    • 9011

    Coating question?

    I need to coat a few rifles.

    I have seen some duracoat and I have seen parts done by ARS (I think they call it metacol). I don't like them, the coating seems too thick, too soft and the ARS stuff seems to flake very easily.

    I really like the old "stoving" that you find on some 60's surplus rifles. That stuff survived 40 years of fairly hard use, it still sticks to the metal and it's durable.

    What is the closest modern equivalent to "stoving"?

    I have heard good things about gunkote but I have never seen a finished piece and I don't have the setup to bake it on.

    Is there any one close to silicon valley that does gunkote? What about parkerizing?

    I don't like to send out my stuff, I just don't trust the post office very much and I hate dealing with problems at long distance.

    Can someone help me out?
    sigpic
    Originally posted by oaklander
    Dear Kevin,

    You suck!!! Your are wrong!!! Stop it!!!
    Proud CGF and CGN donor. SAF life member. Former CRPA member. Gpal beta tester (it didn't work). NRA member.
  • #2
    taloft
    Well used Member
    CGN Contributor
    • Sep 2002
    • 2696

    If you're primarily looking for durability it is hard to beat parkerizing. I'm in So. Cal. so I'll let someone else chime in as to locations.
    .




    "Wise men speak because they have something to say; Fools because they have to say something."--Plato

    Comment

    • #3
      wash
      Calguns Addict
      • Aug 2007
      • 9011

      I want to do a coating over parkerizing, two layers of protection.

      Park is fine, but I don't consider it durable. One good scratch and the base metal will start to rust. Adding a coating can help it slip instead of scratch also.

      Coatings seem easier to clean and I don't worry about it starting to rust like a parked or blued part.
      sigpic
      Originally posted by oaklander
      Dear Kevin,

      You suck!!! Your are wrong!!! Stop it!!!
      Proud CGF and CGN donor. SAF life member. Former CRPA member. Gpal beta tester (it didn't work). NRA member.

      Comment

      • #4
        metalhead357
        Calguns Addict
        • Jan 2006
        • 5546

        I aint tried Duracoat but many love it.

        I have tried Alumahyde II and it works well...and no oven; it DOES take a while to not just *dry*...it will do that fast...but IIRC it takes about a week to really harden up to truly be *mostly* impermiable.

        Brownells Gunkote works REALLY well...but you do have to realllllllllllllly pay attention to the prep process of bead blasting and degreasing or it can flake....but if done right its pretty dang good stuff. Remeber to spray LIGHTLY and do multiple coats...............this one IS oven cured........
        I will not be pushed, filed, stamped, indexed, briefed, debriefed or numbered....
        I am not a number! I am a free man

        1.)All humanity would be better off if Stoooopid hurt.
        2.)Why is it that if guns are sooooo unsafe that you're 9 times more likely to die at the hands of your doctor?
        3.)Remember...Buy it cheap & stack it deep

        Comment

        Working...
        UA-8071174-1