Unconfigured Ad Widget

Collapse

Instruction

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • nicitaja
    Member
    • Apr 2005
    • 315

    Instruction

    I got a LMS Mini-Mill for my birthday from my wife. It was purchased to simply do more precise drilling that my piece of **** DP. And I've been able to use it for that just fine, but I recently ordered the fignoggle plans for DRO conversion, but not sure what type of cutter to use (I've got .6" end milling capacity and 1.2" face milling capacity". I have plenty of 2 and 4 flute mills that I bought for drilling virgin barrel pins, but never used them to "mill". I've been reading on the net and what I can, but I really have no experience at it, I have autocad experience, so I can read and understand the cad drawings, just no idea of really the right way to start. So Im just gonna play with all the scrap aluminum bar I have, and see what I can do, but if anyone has any books, dvd's, or anything that they can direct me to, or let me borrow (East County, San Diego) that would be great. Im a programmer by trade, so Im sure I can figure it out, just like some direction so I learn it correctly.

    Thanks

    JNicita
  • #2
    wash
    Calguns Addict
    • Aug 2007
    • 9011

    Make sure you clamp your part securely, use plenty of lube and take light cuts until you know what your machine can handle.

    You don't want chatter and you shouldn't really use an end mill to do a plunge cut (drilling).

    Good luck.
    sigpic
    Originally posted by oaklander
    Dear Kevin,

    You suck!!! Your are wrong!!! Stop it!!!
    Proud CGF and CGN donor. SAF life member. Former CRPA member. Gpal beta tester (it didn't work). NRA member.

    Comment

    • #3
      nicitaja
      Member
      • Apr 2005
      • 315

      Ive always read everyone using center cutting end mills for drilling out the barrel notches (plunge cutting). Just curious what you would recemend for this? I dont know all the mill tools obviously, just have an assortment of 2/4 flute center cutting end mills, and the dovetail (3/8 & 1/2" cutting dia), still trying to learn thus my post. I was told to use wd40 as a lube. On alluminum (just prepare for for smoke)

      Comment

      • #4
        wash
        Calguns Addict
        • Aug 2007
        • 9011

        There are specialized lubes/coolants for aluminum but it's not as critical as steel.

        Center cutting end mills are not good at plunging because the very center of the bit can barely cut anything. The corner is OK but too much plunge cutting will wear out the corner prematurely.

        If you are enlarging an existing hole an end mill is OK (because the center is already cut).
        sigpic
        Originally posted by oaklander
        Dear Kevin,

        You suck!!! Your are wrong!!! Stop it!!!
        Proud CGF and CGN donor. SAF life member. Former CRPA member. Gpal beta tester (it didn't work). NRA member.

        Comment

        • #5
          nicitaja
          Member
          • Apr 2005
          • 315

          So tool up the chuck on the mill and use drill bits, virgin barrels, no previous holes, i guess its not off topic from my original post?

          Comment

          • #6
            wash
            Calguns Addict
            • Aug 2007
            • 9011

            I'm not sure exactly what type of cut you are making. A drill bit really wants a flat surface to drill on and then it's better to start with a center drill. If you aren't starting with that, spotting with an end mill then a center drill and finishing with a drill may be better (finishing with a reamer might even be a good idea).

            It all depends on the cut and how accurate you need to be.
            sigpic
            Originally posted by oaklander
            Dear Kevin,

            You suck!!! Your are wrong!!! Stop it!!!
            Proud CGF and CGN donor. SAF life member. Former CRPA member. Gpal beta tester (it didn't work). NRA member.

            Comment

            • #7
              m24armorer
              In Memoriam
              • Feb 2006
              • 1422

              Old school, use Crisco for light cuts. Upside is your parts smell like french fries
              07 Class II in the Bay area.
              Enjoy the silence.......
              sigpic
              Celebrating our madness for over
              50 years.


              Only two defining forces have ever offered to die for you, Jesus Christ and the American Soldier. One died for your soul; the other for your freedom.
              - George Patton

              Comment

              Working...
              UA-8071174-1