Ar15 jigs capabilities.

[o.d_green.]

****Jigs compatibilities****
auto correct messed the title ,don't know how to change it


Just know this will help a lot of new calgunners. Just like it helped me, took 4 hours of researching the web but I found it
uploadfromtaptalk1427014657670.jpg

[AC89]

Mighty small image, quite difficult to read.

[o.d_green.]

This image is better
uploadfromtaptalk1427050512546.jpg

[Jet Setter]

Anything about the 80% universal or Modulus jig?

[SVT-40]

My 80% arms jig worked just fine on two Tactical machining lowers???

The above list says it's not compatible???

[Dano3467]

Nice work, maybe some here can help correct a few items for you OP, LIKE SVT-40 ?

[Jester3]

Is this graph current?

[o.d_green.]

I don't know if the chart is current but they do need to put up more jigs and lowers. But remember guys it is one of the few charts out there. So far its the only chart I found I will provide the link, in a few mins

[o.d_green.]

My 80% arms jig worked just fine on two Tactical machining lowers???

The above list says it's not compatible???

This should also help to make a new updated graph

[DRM6000]

Thanks for the good info. I wondered which lowers my Colfax jig will work with.

[golfish]

80% Arms Easy jig and TM lowers are good to go. Might I add a full size router works better for me using the easy jig then the cheaper trim routers

[docflash]

My 80% arms jig worked just fine on two Tactical machining lowers???

The above list says it's not compatible???

+1
I've finished three Tactical Machining lowers using the 80% Arms jig with a drill and router. Almost looks as good as ones I finished using a mill.

[kalibeltfeeder]

Tagged

[toddh]

****Jigs compatibilities****
auto correct messed the title ,don't know how to change it


Just know this will help a lot of new calgunners. Just like it helped me, took 4 hours of researching the web but I found it
[ATTACH]399831[/ATTACH]

You sir, win 1000 interweb points.

On your own, did your own research....without asking for any help.
You posted a useful thing for others to reference.
And it sounds like it will be updated....even better for others down the road.

This is how it is done people.

You do research, you find something good, you post it for others, we all benefit.


.

[o.d_green.]

You sir, win 1000 interweb points.

On your own, did your own research....without asking for any help.
You posted a useful thing for others to reference.
And it sounds like it will be updated....even better for others down the road.

This is how it is done people.

You do research, you find something good, you post it for others, we all benefit.


.

Thanks, I sure hope somebody with more time than me will update the chart as we follow up on this thread