Lee turret press help

[09cs]

I set up, or "tried" to set it up with the progressing feature and not use it as a single stage press, but my auto disk powder measurer is hitting the safety prime (see picture) this is with the riser installed and the powder through expanding die installed per instructions. Any help?

Thanks!

[stilly]

Rotate your powder dropper so it does not hit... It does not matter what way it is facing, as long as it passes by the primer, it should JUST miss it.

[stand125]

rotate 180 degrees and then as I did, scratch your head and go WOW THAT MAKES SENSE

[stilly]

Its those little things...

[09cs]

god I feel like an idiot!

[stphnman20]

lol. Yea just rotate it to the middle.

[Yreka]

god I feel like an idiot!

FWIW, I did the same thing.. It happens

[09cs]

FWIW, I did the same thing.. It happens

as long as I'm not the only one lol

[phonso302]

That small swivel adapter comes in handy if you will be using different turret set ups...

[09cs]

That small swivel adapter comes in handy if you will be using different turret set ups...

I realize that now, once I had it set up for rifles, I never moved it lol

[Enfield47]

Glad you got it working. I did the same thing and it took a little messing around to figure it out. You weren't the first or last person this will happen too.

[09cs]

I'm glad so! lol

[stilly]

It is easy to do such a thing in the presence of such a divine reloading press... I am sure the glow coming off it obscured your vision a little.

I heard if you paint it blue the glow goes away altogether... =D

[Eljay]

I actually use two risers just so I don't have to worry about it.

[stilly]

Well I am using a Lock N Load dropper so mine clears all the time too... :\ Much better capacity too. No more 21.96gr of H110...