Unconfigured Ad Widget

Collapse

Glock Belly reloading?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #16
    at_liberty
    Senior Member
    • Jun 2010
    • 699

    Originally posted by mjmagee67
    45 ACP runs at 21,000 PSI, 40 is at 35,000 PSI over 1/3 more pressure. To see pressure signs in a 45 you are waaaaay over max or have a head-space issue.
    Or maybe a spring issue?

    Comment

    • #17
      firemanjoe
      Senior Member
      • Jul 2012
      • 1066

      Usually if you are going to shoot your reloads out of the same chamber there shouldn't be an issue because that brass will form to that chamber.

      "Glock belly" or "glocked" brass is a result of glocks unsupported chambers, it's what makes glocks so reliable, but the newer glocks have more of a supported chamber than the older ones
      "...... to disarm the people - that was the best and most effectual way to enslave them." - George Mason -

      Comment

      • #18
        HighLander51
        Banned
        • Feb 2010
        • 5144

        Originally posted by mark501w
        Loaded to hot.
        Yes, here are some 9mm brass I picked up from a Open Glock running major 9mm loads (125gr going over 1,320 fps). That's why they are lying on the ground....



        however 40S&W brass can be fixed with this Redding G-RX push thru sizer

        Comment

        • #19
          mark501w
          Senior Member
          • Apr 2011
          • 1699

          Not referring to any picture, but, you are held hostage to the brass & it's ability to contain the tens of thousands of pounds of pressure supported or unsupported . If your brass is moving that much it's dangerous .

          Comment

          • #20
            cruddymutt
            Senior Member
            • Sep 2009
            • 1589

            I always find bulged .40 brass at my local range and it all has the Glock square firing pin mark. I reload for an XD .40 and my Lee sizing die removes the bulge with normal sizing.
            sigpic
            ΜΟΛΩΝ ΛΑΒΕ

            Comment

            • #21
              stilly
              I need a LIFE!!
              • Jul 2009
              • 10685

              Originally posted by HighLander51
              Yes, here are some 9mm brass I picked up from a Open Glock running major 9mm loads (125gr going over 1,320 fps). That's why they are lying on the ground....



              however 40S&W brass can be fixed with this Redding G-RX push thru sizer

              http://www.midwayusa.com/product/358...-sig-10mm-auto
              Looks good to me. I will take them...

              I have a g-17 that shoots belted 9mm...
              7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...

              Need GOOD SS pins to clean your brass? Try the new and improved model...



              And remember- 99.9% of the lawyers ruin it for the other .1%...

              Comment

              • #22
                HighLander51
                Banned
                • Feb 2010
                • 5144

                Originally posted by stilly
                Looks good to me. I will take them...

                I have a g-17 that shoots belted 9mm...
                Ok, but that's why the guy who was shooting the Open Glock left them at the range. Pick up as many as you want.

                Comment

                • #23
                  zfields
                  CGN Contributor
                  • Aug 2010
                  • 13658

                  Originally posted by HighLander51
                  Ok, but that's why the guy who was shooting the Open Glock left them at the range. Pick up as many as you want.
                  9major brass, nearly ad bad as small primer 45acp to brass scroungers.

                  sent from my damn tappy device...
                  Sandstorm Custom Rifle Slings : Custom Paracord slings

                  10% off slings for calguns members. PM for details. Like us on facebook!

                  Comment

                  Working...
                  UA-8071174-1