Unconfigured Ad Widget

Collapse

Why case gauge everything ???

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Munny$hot
    Veteran Member
    • Jul 2011
    • 3665

    Why case gauge everything ???

    Well here's mine.....
    .044 under minimum



    Can DI AR's run dirty?

    Palmetto State Armory Suppliers revealed

    "If it ain't stock, it don't belong on your Glock"
  • #2
    Paperchasin
    YOU are next!!
    CGN Contributor - Lifetime
    • Oct 2010
    • 6407

    Who makes that case gauge??
    Feedback: https://imgur.com/a/mkdPdnQ

    Comment

    • #3
      mark501w
      Senior Member
      • Apr 2011
      • 1699

      I don't know?

      Comment

      • #4
        TacticalPlinker
        Veteran Member
        • Apr 2011
        • 2532

        Is that the gauge, or the round that is out of spec?
        ΜΟΛΩΝ ΛΑΒΕ

        Comment

        • #5
          armyguy209
          Member
          • Jan 2013
          • 335

          Originally posted by Paperchasin
          Who makes that case gauge??
          Looks like a Dillon case gauge.

          Comment

          • #6
            rsrocket1
            Veteran Member
            • Feb 2010
            • 2774

            In needs to be between the high part and the notch.

            If it's below the notch, not good. The case head may rip off during firing. Case head separation is not good.

            Comment

            • #7
              Munny$hot
              Veteran Member
              • Jul 2011
              • 3665

              Its a Wilson gauge and the brass is out of spec. I have a gauge for every type of round I load. The brass is a range pick up that got mixed up with mine.
              Last edited by Munny$hot; 07-30-2013, 9:00 PM.
              Can DI AR's run dirty?

              Palmetto State Armory Suppliers revealed

              "If it ain't stock, it don't belong on your Glock"

              Comment

              • #8
                EL_NinO619
                Senior Member
                • Sep 2010
                • 1519

                Exactly why I do also, let people tell you its not needed. You know what's not needed? None working dangerous ammo. Just my $0.02.
                se carga el diablo de la pistola...
                .223, .25acp, 25-20win, 9mm, 38spl/.357, 10mm .308, 8mm M, 7mm Rem Mag, 45acp, .475 Wildey mag
                On 2 Hornady LnL AP & Dillon Super 1050

                Comment

                • #9
                  tiller
                  Senior Member
                  • Jun 2011
                  • 794

                  I wish I had the time to gauge everything like you guys!
                  .223 & .308 brass processing

                  Comment

                  • #10
                    A and O
                    Member
                    • Apr 2013
                    • 158

                    I don't think anybody is sticking each case into their gauge. I do it at start up on the 650 to confirm nothings been touched to take anything out of spec. That said, I do it again every other time when checking powder throw weight every 100 rounds or so.

                    Variables in brass come into play as well. I had a perfect lot of 3,000 223 FC about a month back. Smooth as butter with not an issue as opposed to a lot of Widener's LC brass that had me checking about one in 50

                    Comment

                    • #11
                      CAL.BAR
                      CGSSA OC Chapter Leader
                      • Nov 2007
                      • 5632

                      I do it to check the crimp and length as well as to force me to check the primer seating as well. Just a good practice.

                      Comment

                      • #12
                        EL_NinO619
                        Senior Member
                        • Sep 2010
                        • 1519

                        Originally posted by tiller
                        I wish I had the time to gauge everything like you guys!
                        Buy a 1050
                        se carga el diablo de la pistola...
                        .223, .25acp, 25-20win, 9mm, 38spl/.357, 10mm .308, 8mm M, 7mm Rem Mag, 45acp, .475 Wildey mag
                        On 2 Hornady LnL AP & Dillon Super 1050

                        Comment

                        • #13
                          ricemanff
                          Member
                          • Jan 2013
                          • 158

                          I case gauge everything, well my son does it actually. I pay him $1 per round that is bad. That is a nice payday for a 9yo. He will tell me if it doesn't fit. That is until he says"dad the 1000 rounds you just loaded are bad"

                          Comment

                          • #14
                            armyguy209
                            Member
                            • Jan 2013
                            • 335

                            I case gauge every single case as well. I just processed about 3k+ cases on my 1050. I probably found 40 cases out of them that did not case gauge all the way. I do the same stroke and everything with the same amount of pressure. I usually throw them back in the bunch and re run them through the press. If they come out a second time the same, they get tossed.

                            Comment

                            • #15
                              GeoffLinder
                              Senior Member
                              • Jul 2009
                              • 2425

                              Originally posted by A and O
                              I don't think anybody is sticking each case into their gauge. I do it at start up on the 650 to confirm nothings been touched to take anything out of spec. That said, I do it again every other time when checking powder throw weight every 100 rounds or so.

                              Variables in brass come into play as well. I had a perfect lot of 3,000 223 FC about a month back. Smooth as butter with not an issue as opposed to a lot of Widener's LC brass that had me checking about one in 50
                              I check each and every round, rifle and pistol, why not, it does not take that long and the benefits outweigh the extra work by far IMHO.

                              Comment

                              Working...
                              UA-8071174-1