Unconfigured Ad Widget

Collapse

Improved my Lee Universal Decapper

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Syntax Error
    Veteran Member
    • Nov 2009
    • 3817

    Improved my Lee Universal Decapper



    Tapered off the edge near the decapper pin as I was tired of .223 cases bumping into the ridge on the normal pin on my Hornady LNL AP!
  • #2
    Ferrum
    Janitors Mop
    CGN Contributor - Lifetime
    • Aug 2011
    • 4431

    Grind it?

    Comment

    • #3
      C3nt3rMa55
      Member
      • Feb 2012
      • 222

      Good idea! I hate when I snag that edge

      Comment

      • #4
        milotrain
        Veteran Member
        • Apr 2011
        • 4301

        great idea.
        weg: That device is obsolete now. They replaced it with wizards.
        frank: Wait a minute. There are more than one wizard? Is [are?] the wizard calibrated?

        Comment

        • #5
          Syntax Error
          Veteran Member
          • Nov 2009
          • 3817

          Originally posted by Ferrum
          Grind it?
          Yep. In absence of proper tools for something like this, I just put the pin in an electric drill and put a file to the edge and just rotated the pin until the profile was good.

          Comment

          • #6
            Dark Mod
            Veteran Member
            • Feb 2011
            • 4284

            MacGuyver would be proud

            Comment

            • #7
              mjmagee67
              Veteran Member
              • Jun 2011
              • 2771

              Yeppers did that to. Works well.
              If you want change you have to put in your 2 cents, you can't just sit on the sidelines and whine.

              Comment

              • #8
                stilly
                I need a LIFE!!
                • Jul 2009
                • 10685

                Originally posted by Dark Mod
                MacGuyver would be proud
                He sure would; then he would use it to dig a wick out of a candle or pick a lock that he had laying around...



                This is a good idea though and Maybe later I will do mine up this way, I have often been thinking , DAMN another D shaped .223 and I was not paying attention and slammed the lee hand press in and bent the mouth so toss away another case. But seriously though, Lee decapper pins SHOULD all be like that cause ya never know... ;
                Last edited by stilly; 07-15-2013, 12:44 PM.
                7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...

                Need GOOD SS pins to clean your brass? Try the new and improved model...



                And remember- 99.9% of the lawyers ruin it for the other .1%...

                Comment

                • #9
                  Stryfe76
                  Senior Member
                  • Feb 2009
                  • 744

                  Originally posted by Syntax Error
                  Yep. In absence of proper tools for something like this, I just put the pin in an electric drill and put a file to the edge and just rotated the pin until the profile was good.
                  I did the same thing, makes the dinged .223 case mouths easier to deal with.

                  Comment

                  • #10
                    Syntax Error
                    Veteran Member
                    • Nov 2009
                    • 3817

                    Ran 500 cases through my press last night and had no issues with case necks bumping into the decapper, so I think I have a keeper here. I put the decapper on my first station to run a pin through the flash hole in case some corn cob media got stuck in there after the post-lube tumble.

                    Comment

                    • #11
                      A and O
                      Member
                      • Apr 2013
                      • 158

                      Great idea.

                      You might want to forward the info to Lee so that they can apply it to their future production runs. Who knows? They may give you a couple bucks for the great idea.

                      Comment

                      Working...
                      UA-8071174-1