Unconfigured Ad Widget

Collapse

Pistol Case Question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • XVIga_Rob
    Senior Member
    • May 2012
    • 2354

    Pistol Case Question

    Still new to reloading and curious about using (used/or so called once fired) mixed headstamped brass. The manual I have doesn't recomend it. Much like my pistol owners manuals say to use only factory ammo.

    I have an RCBS Rockchucker Supreme press, RCBS Carbide Dies, and work in batches of 100~200. Loading 9mm & .45ACP. Until now, I've only used my reclaimed 'once fired' factory brass, all with the same head stamp.


    I'm curious if working a batch of mixed headstamed brass, would I run into issues or enough issues that it would not be worth my time/money? I'm not looking to produce 'match grade' ammo, just general target ammo.
  • #2
    Colt562
    Calguns Addict
    • Jun 2012
    • 5271

    Yeah its ok to use mixed headstamped.
    Originally posted by bruceflinch
    Tis Better, to be Overworked & Underpaid,
    Than Oversexed & Underlaid...

    Comment

    • #3
      BigBronco also not a Cabinetguy
      Calguns Addict
      • Jul 2009
      • 7084

      Originally posted by Colt562
      Yeah its ok to use mixed headstamped.
      For plinking, general shooting and recoil therapy. If I found a usable case laying in the gutter or at a crime scene. I probably would pick it up reload it and use it. I have never counted firings.

      Match ammo I would rather not, though I have.
      "Life is a long song" Jethro Tull

      Comment

      • #4
        mark501w
        Senior Member
        • Apr 2011
        • 1699

        I don't mix'em if I'am going to spend the time & cost to reload, I wan't to know what the pressures are & where it's going to shoot.

        Comment

        • #5
          XDRoX
          Veteran Member
          • Mar 2009
          • 4420

          I never sort by headstamp. Just tumble them, load them, and shoot them.
          Chris
          <----Rimfire Addict


          Originally posted by Oceanbob
          Get a DILLON...

          Comment

          • #6
            XVIga_Rob
            Senior Member
            • May 2012
            • 2354

            I have a small but growning collection of various brass (all usable) that has come home with me over time. I'll give em a try. Thanks!

            Comment

            • #7
              uhlan1
              Calguns Addict
              • Aug 2012
              • 6217

              I load them all and don't sort. The greatest variances seem to be in 9mm. I just watch my OAL. Make sure I am on or just slightly longer.
              "Hence it happened that all the armed prophets conquered, all the unarmed perished." - Niccolo Machiavelli

              Comment

              • #8
                Chief-7700
                Veteran Member
                • May 2008
                • 3382

                Been reloading mixed headstamp range pick up .45ACP for years and no problems. Brass into tumbler, inspect, sort by primer size then dump into case feeder
                Chief

                XL-650 to feed the: .45ACP's Les Baer Concept V, Ruger SR 1911, Ruger Nightwatchman,custom built Colt M1911, Springfield .45ACP Loaded.. 9MM SA Range Officer,Ruger P-85, Springfield Stainless 9MM loaded, SA 9MM 5.25" XDM, Springfield 9mm Stainless Range Officer, STI double stack .45ACP.
                IDPA A41750 Safety Officer
                NRA Certified RSO
                "Stay out of the deep end of the pool; correct the problem with your credit card, not your dremel!"

                Comment

                • #9
                  rsrocket1
                  Veteran Member
                  • Feb 2010
                  • 2774

                  I agree with Chief. If the cases aren't split, tumble, load, shoot, repeat.

                  I shoot some 45ACP cases where the headstamp has worn off.

                  Comment

                  • #10
                    the led farmer
                    Member
                    • May 2011
                    • 194

                    Pistol Case Question

                    How do I reload mix headstamp brass?? One right after the other!

                    knock 'em out O/P

                    Originally posted by GeoffLinder
                    IMHO you should us a case gauge for all calibers you reload. I even gauge factory ammo I reserve for my social guns. I have found a few factory rounds that were not a perfect fit in gauges.

                    Case gauges are cut near minimum spec for a caliber. Pistol chambers are typically cut somewhere north of that. This means a barrel is only a reasonable check for that pistol.
                    this has nothing to do with the O/P's question and IMHO is faulty logic anyway. The chamber is not a "reasonable check for that pistol" it is the definitive check. If it fits in the chamber of the firearm it is good to go regardless of what the case gauge says.
                    Last edited by the led farmer; 07-04-2013, 10:46 AM.

                    Comment

                    • #11
                      shooting4life
                      Calguns Addict
                      • Jan 2009
                      • 5771

                      Mix head stamps for common calibers, 9, 357, 40 and 45. Most times I sort 44mag but I have been known to load a bunch of differing case types at the same time.

                      Comment

                      • #12
                        Pauliedad
                        CGN/CGSSA Contributor - Lifetime
                        CGN Contributor - Lifetime
                        • Dec 2012
                        • 2095

                        I've sorted by head stamp because I was told to. I've found it does help with usage count. I've read that .45 seems almost immortal where 9mm and.40 are living closer to the limits so I would watch those closely.
                        I still sort by head stamp and in .45 by primer size because it is a great way to really inspect the case closely.
                        Enjoy!

                        Comment

                        • #13
                          GeoffLinder
                          Senior Member
                          • Jul 2009
                          • 2425

                          Originally posted by the led farmer
                          this has nothing to do with the O/P's question and IMHO is faulty logic anyway. The chamber is not a "reasonable check for that pistol" it is the definitive check. If it fits in the chamber of the firearm it is good to go regardless of what the case gauge says.
                          I posted my reply in wrong thread,oops, and I disagree, using "your" barrel it is then only checked in "that" chamber. Different guns have different chambers.

                          Comment

                          • #14
                            stilly
                            I need a LIFE!!
                            • Jul 2009
                            • 10685

                            Originally posted by XVIga_Rob
                            Still new to reloading and curious about using (used/or so called once fired) mixed headstamped brass. The manual I have doesn't recomend it. Much like my pistol owners manuals say to use only factory ammo.

                            I have an RCBS Rockchucker Supreme press, RCBS Carbide Dies, and work in batches of 100~200. Loading 9mm & .45ACP. Until now, I've only used my reclaimed 'once fired' factory brass, all with the same head stamp.


                            I'm curious if working a batch of mixed headstamed brass, would I run into issues or enough issues that it would not be worth my time/money? I'm not looking to produce 'match grade' ammo, just general target ammo.
                            No REAL issues. This is about all I do. I do not have the bags or time to sort all of my cases by brands/headstamps/models/weights/finish/color/clarity/fire/rc hardness/how many times fired...

                            I would have a lot of bags with a single shell in them...
                            Last edited by stilly; 07-05-2013, 8:45 PM.
                            7 Billion people on the planet. They aint ALL gonna astronauts. Some will get hit by trains...

                            Need GOOD SS pins to clean your brass? Try the new and improved model...



                            And remember- 99.9% of the lawyers ruin it for the other .1%...

                            Comment

                            • #15
                              the led farmer
                              Member
                              • May 2011
                              • 194

                              Originally posted by GeoffLinder
                              I posted my reply in wrong thread,oops...
                              The devil is in the details, Geoff

                              Comment

                              Working...
                              UA-8071174-1