Post your reloading rig!

[BamBam-31]

Behold, my Double D's!

[scarry scarney]

My photos...

Photo one, is my "combo bench." Presently, it has a Hollywood Senior Turret Press used for BIG calibers, a MEC that I use for slug/buck, and an RCBS Rockchucker. When not configured with the three presses, it does double duty as my casting/lubing bench. Casting oven is RCBS for my hard stuff lead, and a smaller Lyman for the pure lead stuff.

Photo two, shows a Dillon 550 and a Dillon 650. Still waiting for a Bullet feeder for the 650 to come in.

Photo three shows some of the brass above the bench.

Photo four shows powder,primers, and some of the loaded ammo (In ammo cans).

[xxdabroxx]

can this get stickied?

[SoCal50Lover]

Man some of you guys are scary... But very impressive.

[r08ert209cali]

My modest setup.cant wait to get some blue stuff.need to get more components as well.

[xxdabroxx]

xxdabroxx & DJBSR's Bench

Here is our recently completed reloading setup.

first, the bare bones:





Now, with supplies & equip.:





We had to do quite a bit of cleaning to claim this stake in the basement. We also removed the existing incandescent light and replaced it with two 4' T8 fluorescent light fixtures. You can also see that there are a couple of elec. boxes on top of the conc. wall. Those are to be added to each post, and one under the stairs. Electricity is nice.

[ar15barrels]

Nice mount.
Does it wiggle left-right at all?
One bar over to the right wall would make it bombproof!

[xxdabroxx]

the 4 anchor bolts on the bott. hold it pretty steady. if you bang on it with your hand you get it to vibrate kinda, but that's about it. we thought about adding another kicker that went to the side wall but decided it was over kill. we are still looking for a way to make a coffee can holder for it as well, would be great during depriming.

[ar15barrels]

we thought about adding another kicker that went to the side wall but decided it was over kill.

I don't understand the concept of overkill.

Nice stainless work on the benchtop by the way.

[xxdabroxx]

stainless top has three anchors in it as well as three screws under the front lip. anchor bolts are good!

and thanks!

[Rwnielsen]

I live in an apartment too....this works fine but is a little noisy....



I could have spent a minute or two cleaning it off.............*jeez*

[ar15barrels]

I live in an apartment too....this works fine but is a little noisy....



I could have spent a minute or two cleaning it off.............*jeez*